User manual AIRLIVE WH-5420CPE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AIRLIVE WH-5420CPE. We hope that this AIRLIVE WH-5420CPE user guide will be useful to you.
You may also download the following manuals related to this product:
AIRLIVE WH-5420CPE DATASHEET (570 ko)
Manual abstract: user guide AIRLIVE WH-5420CPE
Detailed instructions for use are in the User's Guide.
[. . . ] WH-5420CPE
Hi-Powered Wireless Outdoor CPE
User's Manual
Declaration of Conformity
We, Manufacturer/Importer
OvisLink Corp. 5F. , NO. 6, Lane 130, Min-Chuan Rd. , Hsin-Tien City, Taipei County, Taiwan
Declare that the product
Hi-Powered Wireless Outdoor CPE AirLive WH-5420CPE
is in conformity with
In accordance with 2004/108/EC Directive and 1999/5 EC-R & TTE Directive
Clause
EN 300 328 v1. 6. 1
Description Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission equipment operating in the 2. 4GHz ISM band And using spread spectrum modulation techniques; Part 1technical Characteristics and test conditions Part2Harmonized EN covering Essential requirements under article 3. 2 of the R&TTE Directive
(2004-11)
EN 301 489-01 V1. 6. 1 Electromagnetic compatibility and Radio spectrum Matters (ERM);
(2005-09) Electromagnetic compatibility(EMC) standard for radio equipment and EN 301 489-17 V1. 2. 1 Services; Part 17Specific conditions for wideband data and (2002-08) HIPERLAN equipment
EN 50383:2002
Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunication systems (110 MHz 40 GHz). business equipment
EN 60950-1:2001/A11 Safety for information technology equipment including electrical
:2004
CE marking
Manufacturer/Importer
Signature Name Position/ Title
Albert Yeh Vice President
(Stamp)
Date 2008/10/1
AirLive WH-5420CPE CE Declaration Statement
Country cs Cesky [Czech] Declaration OvisLink Corp. tímto prohlasuje, ze tento AirLive WH-5420CPE je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnice 1999/5/ES. [. . . ] To configure the access control, please refer to Section 3. 11 Access Control Settings . . . . . . To configure the Traffic Control, please refer to Section 3. 12 Access Control Settings . . . . . .
35
36
3. 5 Universal Repeater Mode Settings
Alias Name: Another name for WH-5420CPE. Disable Wireless LAN Interface: Check the box to disable the Wireless LAN Interface, by so doing, you won't be able to make wireless connection with this Access Point in the network you are located. In other words, this device will not be visible by any wireless station. 2. 4GHz (B+G): 802. 11b supported rate and 802. 11g supported rate.
The default is 2. 4GHz (B+G) mode. SSID (Network ID): Provide SSID for wireless client survey and connection. The SSID differentiates one WLAN from another; therefore, all access points and all devices attempting to connect to a specific WLAN must use the same SSID. A device will not be permitted to join the BSS unless it can provide the unique SSID. An SSID is also referred to as a network name because essentially it is a name that identifies a wireless network. This field is to provide for wireless client connection.
37
Channel Number: Allow user to set the channel manually or automatically. If "Auto" is selected, user can set the channel range to have Wireless Access Point automatically survey and choose the channel with best situation for communication. The number of channels supported depends on the region of this Access Point. All stations communicating with the Access Point must use the same channel. SSID of Extended Interface: This field is the SSID of remote Access Point to connect to. 802. 1d Spanning Tree: Spanning tree is to prevent bridge loop when there are multiple active paths between network nodes. Spanning tree allows a network design to include spare (redundant) links to provide automatic backup paths if an active link fails, without the danger of bridge loops, or the need for manual enabling/disabling of these backup links. Site Survey: Use this button to find out the remote Access Point and check the signal strength.
To configure the security connection, please refer to Section 3. 9 Wireless Security Settings . . . . . . To configure the Advanced Settings, please refer to Section 3. 10 Advanced Wireless Settings . . . . . . To configure the access control, please refer to Section 3. 11 Access Control Settings . . . . . . To configure the Traffic Control, please refer to Section 3. 12 Access Control Settings . . . . . .
38
3. 6 WISP Mode Settings
Client Mode Settings Router Settings
Alias Name: Another name for WH-5420CPE. Disable Wireless LAN Interface: Check the box to disable the Wireless LAN Interface, by so doing, you won't be able to make wireless connection with this Access Point in the network you are located. In other words, this device will not be visible by any wireless station. [. . . ] Or click Upload to start the upgrade.
74
4. 3 Save / Reload Settings
This function enables users to save the current configurations as a file (i. e. config. dat) To load configuration from a file, enter the file name or click Browse. . . Save Settings to File: Click "SAVE" to save the current configuration to file.
When prompted the upper left screen, select "Save this file to disk", and the upper right screen will prompt you a dialog box to enter the file name and the file location. if you want to load a pre-saved file, enter the file name with the correct path and then click on Upload. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AIRLIVE WH-5420CPE
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AIRLIVE WH-5420CPE will begin.