User manual ALTEC LANSING 601-8D DUPLEX SPEAKER
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ALTEC LANSING 601-8D DUPLEX SPEAKER. We hope that this ALTEC LANSING 601-8D DUPLEX SPEAKER user guide will be useful to you.
Manual abstract: user guide ALTEC LANSING 601-8D DUPLEX SPEAKER
Detailed instructions for use are in the User's Guide.
[. . . ] In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: WARNING: THIS APPARATUS MUST BE EARTHED. [. . . ] Movie Gives greater depth to darker portions of image for a more exciting theater experience. Custom The factory preset value is the same as the one of "Standard". Using the dedicated software "Sharp Gamma Manager" allows you to adjust the gamma curve. Visit "http://sharp-world. com/projector/" for details.
2 Adjusting the Image
Select a picture mode before adjusting the image.
Selectable items Contrast Bright Color*1 Tint*1 Red*1 Green*1 Blue*1 Sharp*2 Press \
For less contrast For less brightness For less color intensity For making skin tones purplish For weaker red For weaker green For weaker blue For less sharpness
Press |
For more contrast For more brightness For more color intensity For making skin tones greenish For stronger red For stronger green For stronger blue For more sharpness
Useful Features
*1 "Color", "Tint", "Red", "Green" and "Blue" cannot be adjusted when "C. M. S. Adjustment" on the "C. M. S. " menu is set to "sRGB". (See page 52. ) *2 "Sharp" can be adjusted only when 480I, 480P, 540P, 576I, 576P, 720P, 1035I, 1080I or 1080P DTV signal is input during the COMPUTER1/2, DVI, HDMI mode; or the input mode is set to VIDEO or S-VIDEO.
Note
· You can also press PICTURE MODE on the remote control to select the picture mode. (See page 38. )
Note
· To reset all adjustment items, select "Reset" and press ENTER.
-49
Picture Adjustment ("Picture" menu)
Menu operation
Page 47
3 Adjusting the Color Temperature
Selectable items Description 4500K For lower color temperature for warmer, reddish incandescent-like images.
5 Reducing Image Noise (DNR)
Video digital noise reduction (DNR) provides high quality images with minimal dot crawl and cross color noise.
Selectable items Description Off DNR does not function. Level 13 Sets the DNR level.
10500K
For higher color temperature for cooler, bluish, fluorescent-like images.
Note
· "CLR Temp" cannot be set when "C. M. S. Adjustment" on the "C. M. S. " menu is set to "sRGB". (See page 52. )
Note
· Set a level so as to view a clearer picture.
Make sure to set "DNR" to "Off" in the following cases:
· When the image is blurry. · When TV broadcasts with weak signals are projected.
4 Selecting the Progressive Mode
Selectable items 2D Progressive 3D Progressive Film Mode Description Useful to display fast-moving images such as sports and action films. Adjustment" is set to "sRGB", the projected image may become dark, but this does not indicate a malfunction.
2 Selecting the Target Color
This function allows you to select the target color for adjusting the display characteristics.
Red Yellow Green Cyan Blue Magenta
7 Overview of All Color Settings
This function allows you to confirm the settings of all the colors.
-52
Computer Image Adjustment ("Fine Sync" menu)
Menu operation
Page 47
2 Saving Adjustment Settings
1
This projector allows you to store up to seven adjustment settings for use with various computers.
2 3 4 5 6 7
3 Accessing Adjustment Settings
Adjustment settings stored in the projector can be easily accessed.
Note
· If a memory has not been set, the resolution and frequency setting will not be displayed. · When selecting a stored adjustment setting with "Select Setting", you can set the projector in the stored adjustments.
1 Adjusting the Computer Image
Use the Fine Sync function in case of irregularities such as vertical stripes or flickering in portions of the screen.
Selectable items Description Clock Adjusts vertical noise. V-Pos Centers the on-screen image by moving it up or down.
4 Setting the Resolution
Ordinarily, the type of input signal is detected and the correct resolution mode is automatically selected. However, for some signals, the optimal resolution mode in "Resolution" on the "Fine Sync" menu may need to be selected to match the computer display mode.
Useful Features
Note
· You can automatically adjust the computer image by setting "Auto Sync" on the "Fine Sync" menu to "Normal" or "High Speed", or by pressing AUTO SYNC on the projector or on the remote control. · To reset all adjustment items, select "Reset" and press ENTER.
Note
· If your computer displays patterns which repeat every other line (horizontal stripes), flickering may occur which makes the image hard to see. · See "Checking the Input Signal" on page 54 for information on the currently selected input signal.
-53
Computer Image Adjustment ("Fine Sync" menu)
Menu operation
Page 47
5 Checking the Input Signal
You can check the input signal information.
7 Setting the Auto Sync Display Function
Used to set the display during Auto Sync.
Selectable items Description The image set as a background image Background is projected. The computer image being adjusted is displayed.
6 Auto Sync Adjustment
Used to automatically adjust a computer image.
Selectable items Off Normal Description Auto Sync adjustment is not automatically performed. Auto Sync adjustment will occur when the projector is turned on or when the input signals are switched, when connected to a computer. "Normal" takes more time than "High Speed" for more accurate Auto Sync adjustment.
High Speed
Note
· Auto Sync adjustment is also performed by pressing AUTO SYNC on the projector or on the remote control. · The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. · When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. [. . . ] 26 Save Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Select Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Service Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Set Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ALTEC LANSING 601-8D DUPLEX SPEAKER
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ALTEC LANSING 601-8D DUPLEX SPEAKER will begin.