User manual AMERICAN AUDIO DCD-PRO250

[. . . ] 5 PROformer Series © American DJ® AUDIO Los Angeles, CA 90058 USA CONTENTS SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT SAFETY ITEMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 GENERAL NOTES ON USE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 MAIN FEATURES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 PREPARATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 NAMES AND FUNCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9 BASIC OPERATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-13 BEFORE SWITCHING OFF THE POWER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 COMPACT DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 SPECIFICATIONS GENERAL Type: Disc Type: Dimensions: Twin mechanism compact disc player with wired controller. Standard compact discs (5 in / 12 cm and 3 in / 8 cm discs) Player Unit: 18 29/32" (W) x 3 27/64" (H) x 9 28/32" (D) 480mm (W) x 88. 8mm (H) x 251mm (D) (without feet) Control Unit: 18 29/32" (W) x 3 27/64" (H) x 2 12/32 (D) 480mm (W) x 88. 8mm (H) x 40mm (D) (without feet) 19-inch rack mountable Player Unit: 2U / 2 rack spaces Control Unit: 2U / 2 rack spaces Player Unit: 11 lbs. 115/230V AC, 50/60 Hz 25W Operational temperature: 5 to 35°C (41 to 95°F) Operational humidity: 25 to 85% (no condensation) Storage temperature: -20 to 60°C (4 to 14°F) Connecting cord (1 set for left each channel) - Control cord (1. 8m/6 ft. ) 16 bit linear per channel 44. 1 kHz at normal pitch 8 times 16 bit 10 to . 20000 Hz 0. 02% 88dB 80dB 2. 0V +/- 1dB 47 kohm or more +/- 10% or more 1/75 sec. (1 subcode frame) Installation: Weight: Power Supply: Power Consumption: Environmental Conditions: Accessories: AUDIO SECTION Quantization: Sampling rate: Over sampling rate: D/A conversion: Frequency response: Total harmonic distortion: Signal to noise ratio: Channel separation: Output level: Load impedance: FUNCTIONS Variable pitch: Search accuracy: Specifications and design are subject to change without notice for purpose of improvement. American DJ® AUDIO · DCD-PRO250TM INSTRUCTIONS MANUAL · PAGE 2 IMPORTANT SAFETY ITEMS FOR U. S. A. [. . . ] This is fast BACK SKIP through the tracks on your CD 17) FORWARD SKIP BUTTON - Use this button to skip to the next track on the CD. 18) TIME BUTTON - Press this button to switch the time display between the elapsed time and remaining time, and total remain time. The selected mode is indicated by the ELAPSED, REMAIN and TOTAL REMAIN indicator on the LCD. Control Unit - Rear (Figure 4) 1) PLAYER 2 REMOTE CONNECTOR - Connect to player 2 connector on transport assembly. 2) PLAYER 2 CONTROL - Connect mini-plug from CONTROL out on rear of CONTROL UNIT to a mixer's CONTROL out. This feature is available on all mixers with Fader "Q" Start (see Q" Start Control p. 5). 3) PLAYER 1 REMOTE CONNECTOR - Connect to 14) OUT/LOOP - Used to set the ending point when looping. When the OUT/LOOP button is pressed, the player will play the loop continuously. To exit the loop, press the OUT/LOOP button again. American DJ® AUDIO · DCD-PRO250TM INSTRUCTIONS MANUAL · PAGE 9 FUNCTIONS & CONTROLS CONT. player 1 connector on transport assembly. 4) PLAYER 1 CONTROL - Connect mini-plug from CONTROL out on rear of CONTROL UNIT to a mixer's CONTROL out. This feature is available on all mixers with Fader "Q" Start (see Q" Start Control p. 5). LCD (Figure 5) 1) TRACK INDICATOR - Indicates the current track that is playing, cued, or in pause mode. 5) BAR INDICATOR - These ten indicator provide a visual display of the approximate position of the pickup within the current track. ELAPSED INDICATOR - It indicates that the time shown on the display is the elapsed time. CONTINUE INDICATOR - When this indicator is glowing, disc playback will continue through the remain tracks until the disc ends. SINGLE INDICATOR - When this indicator is glowing, playback on the current track will stop at the beginning of the next track. REMAIN INDICATOR - It indicates that the time shown on the display is the remaining time of the playing track. PITCH PERCENTAGE DISPLAY - This displays the amount of pitch being applied to the current track. The pitch percentage is adjusted by the PITCH SLIDER. 6) 7) 8) 9) 10) BASIC OPERATIONS 1. OPEN/ CLOSE buttons are provided on both the main unit and control unit. This feature is to prevent playback from being interrupted if the OPEN/CLOSE button is pressed accidentally. Loading discs · Hold the disc by the edges and place it in the disc holder, then press the OPEN/CLOSE button again to close the disc holder. [. . . ] · To program a track in to memory: 1) Be sure the drive is in PAUSE or CUE MODE. The program indicator LED above the PROG BUTTON will light and the PROGRAM INDICATOR in the LCD DISPLAY will turn on indicating that PROGRAM MODE has been activated. 3) Select a Track by using the FORWARD AND REVERSE TRACK BUTTONS, and again press PROG. BUTTON the LCD DISPLAY will indicate which tracks have been programmed. [. . . ]