Detailed instructions for use are in the User's Guide.
[. . . ] American Audio - www. AmericanAudio. us LOS ANDELES, CA. 90058
Rack Color LED
User Instructions
Descriptions:
Congratulations with your purchase of this product. Read this manual carefully before using our American Audio Rack Color LED. [. . . ] Voice:(800) 322-6337 Fax:(323) 582-2610 E-mail:support@AmericanAudio. us
-Page 1-
P/N:24-004-2108-00Rev1. 1
Operating Instructions:
All work modes and parameters can be set up by a combination with Infrared remote control operation. Before operation, make sure the batteries(3V, CR2025) have been installed properly. Operation Instructions There are 8 dedicated color brightness pushbuttons(marked Red, Green, Blue, White, Cyan, Magenta, Yellow, Amber). There are also the "AUTO" and the "UNIT SETTING" pushbuttons, as well as Raise&Lower keys(marked for "raise" and for "lower") on the remote unit. For further information, please refer to the following table;
Pushbuttons&Keys
RED pushbutton GREEN pushbutton BLUE pushbutton CYAN pushbutton MAGENTA pushbutton YELLOW pushbutton WHITE pushbutton AMBER pushbutton AUTO pushbutton PATTERN/RED key PATTERN/RED key SPEED/GREEN key SPEED/GREEN key FADE/BLUE key FADE/BLUE key BRIGHTNESS key BRIGHTNESS key Red, 100% brightness Green, 100% brightness Blue, 100% brightness Cyan, 100% brightness Magenta, 100% brightness Yellow, 100% brightness White, 100% brightness Amber, 100% brightness The color is changing automatically, and the brightness is 100%. To select the next pattern or increase the red brightness, and holding it down, the brightness will increase continuously until up to the maximum. To select the previous pattern or decrease the red brightness, and holding it down, the brightness will increase continuously until up to the minimum. To increase the speed or the green brightness, and holding it down, it will increase continuously until up to the maximum. To decrease the speed or the green brightness, and holding it down, it will increase continuously until up to the minimum. To increase the fade time or the blue brightness, and holding it down, it will increase continuously until up to the maximum. To decrease the fade time or the blue brightness, and holding it down, it will decrease continuously until up to the minimum. To increase the overall brightness, and holding it down, it will increase continuously until up to the maximum. [. . . ] 4. Effective distance from your unit to Remote Control shall be limited within the range of 10m. Otherwise, it results out of control.
Physical Dimensions:
Milk frost diffuser
Face View Housing
Side View
Top View
Accessories(included):
AC Adaptor
RC-1(Infrared remote control)
-Page 3- [. . . ]