User manual AMERICAN AUDIO SCRATCH BOX SET UP

[. . . ] Be sure to make all connections before powering the unit! GND Scratch Box CLK OUT 1 R L CLK OUT 2 DC 12V Scratch Box T U R N TA B L E SB-12 Vinyl Record Only OUT CLK 1 Stereo Mini Plug Only CLK OUT 2 DC 12V SCRATCH BOX INPUT DIGITAL OUT AC INPUT 115/230 V, 50/60 Hz CONNECT TO CONTROL 2 AUDIO OUT SCRATCH BOX INPUT DIGITAL OUT 2 R L Voltage Selector CONNECT TO CONTROL 1 AUDIO OUT CAUTION 115V 230V RISK OF ELECTRICAL SHOCK DO NOT OPEN 1 R L DCD-PRO610 ONLY Scratch BoxTM - The Scratch BoxTM is compatible with any turntable. [. . . ] Connect the turntable ground cable to this connector to avoid hum and pops associated with phono cartridges. CHANNEL 2 CONTROL OUTPUT - This control jack is used to send the signal coming from the turntable to the CD player. Connect this output to the channel two scratch box insert on the rear of the CD transport unit. CHANNEL 1 CONTROL OUTPUT - This control jack is used to send the signal coming from the turntable to the CD player. Connect this output to the channel one scratch box insert on the rear of the CD transport unit. POWER SUPPLY INPUT - Connect the power supply included with the unit to power the Scratch R L TM Box. [. . . ] GROUND OUTPUT - Connect the turntable ground cable to this connector to avoid hum and pops associated with phono cartridges. American Audio® · INSTRUCTION MANUAL [. . . ]