User manual AMX FILETRANSFER2 V1.0

[. . . ] instruction manual FileTransfer2 So ftw are Software License and Warranty Agreement LICENSE GRANT. AMX grants to Licensee the non-exclusive right to use the AMX Software in the manner described in this License. This license does not grant Licensee the right to create derivative works of the AMX Software. The AMX Software consists of generally available programming and development software, product documentation, sample applications, tools and utilities, and miscellaneous technical information. Please refer to the README. TXT file on the compact disc or download for further information regarding the components of the AMX Software. [. . . ] In the Selection Options section: Select Active System to add files from the active System in the open Workspace. Select a Project-System to add files from a specific Project/System in the open Workspace. Click in the checkboxes to specify which file types in the selected System to add. Click OK to close the Quick Load dialog and add the files to the File To Send queue. Adding Individual System Files From the Open Workspace file With a Workspace (or Workspace To-Go) file open, use the Add command button (in the Send tab) to select individual System files to add to the Files To Send queue: 1. Click the Add command button to open the Select Files For File Transfer dialog. This tab consists of a display of the (compiled) Source Code (. AXS), Token (. TKN), User-Interface (. TPD/. TP4) and IR (. IRL) files contained in the currently open Workspace. Use the options in the Current Workspace tab to locate and select file(s) for transfer to the Master or System devices on the bus. Use this tab if the file(s) you want to transfer are included in the open Workspace. Click the Add command button to open the Select Files For File Transfer dialog. Use this tab if the file(s) you want to transfer are not included in the open Workspace. This tab consists of a display of the different types of files that can be transferred to the Master or System devices on the bus: IR Codes (*. IRL/*. IRV) NetLinx Source Code (*. SRC) Compiled NetLinx Source Code (*. TKN) Compiled Axcess Source Code (*. TOK) Touch Panel Design File (*. TPD) TP4 Touch Panel (*. TP4) 16 FileTransfer2 Using FileTransfer2 KPD Keypad Touch File (*. KPD) 3. This invokes the Open dialog, with the Files of Type selection already set to the selected file type. Click Open to add the selected file to the Files To Send queue. Adding Files To The Files To Receive Queue IR files cannot be received from Axcess Master controllers. To add files to the Files To Receive queue: 1. Click the Add command button to open the Select Files For Transfer dialog. Select the type of file you want to receive from the system device (IRL/IRV, TPD, SRC, AXS or TP4), and click Add (opens the Save As dialog). The file types that are available for selection depend on the selected Platform (Axcess or NetLinx), Send/Receive selection and Communication settings. 4. In the Save As dialog, specify a name and target directory for the retrieved file. Click Save to close this dialog and open the Enter Device Mapping Information dialog. Enter the Device, Port and System numbers for the source device, and click OK to close the dialog and add the to the File list at the bottom of the Select Files To Transfer dialog. Click Settings in the Communication Settings section at the bottom of the dialog to open the Communication Settings dialog and specify the communication settings for the source device. Note that in the Select Files For File Transfer dialog, communication settings apply to every file in the File list (since in this case the communication settings are relating to a system device that is the source for files you are receiving, not to individual files that may be sent to any of several devices in the system). The files you added should now appear in the Files To Receive queue of the Receive tab. [. . . ] The first matching system is transferred. FTL File Transfer Arguments The following arguments specify how to launch the FTCon program with an FTL file: "FileName" ­Send | -Receive "FileName" - Fully qualified file name of the FTL within quotes. -Send |-Receive Indicates whether to load the specified FTL into the send or receive queue. Send is assumed by default. Single File Transfer Arguments The following arguments specify how to launch the FTCon program with a single file. All arguments must be present on the command line, except where noted, for the specified file or the file will not transfer. [. . . ]