User manual AMX KEYPADBUILDER

[. . . ] Operation/Reference Guide KeypadBuilder v2. 1 Keypad Device Design Software S of t w ar e Document ID: 33-004-2942 Initial Release: / Last Revised: 06/7/2006 AMX Limited Warranty and Disclaimer AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX, with the following exceptions: · · · Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the display and touch overlay components that are warranted for a period of one (1) year. Disk drive mechanisms, pan/tilt heads, power supplies, and MX Series products are warranted for a period of one (1) year. AMX Lighting products are guaranteed to switch on and off any load that is properly connected to our lighting products, as long as the AMX Lighting products are under warranty. AMX does guarantee the control of dimmable loads that are properly connected to our lighting products. [. . . ] Within the graphic, click on the button for which you want to create a display in the LCD. For Text and Unicode users, type or paste your characters within the Text field. Complex Script entries need to click Glyph to select the glyph they wish to use. If you do not provide KeypadBuilder with an Item Name, it will use the Glyph ID to differentiate glyph items used. Determine the justification of the information by clicking the radio button for: Left Center Right 8. After you have set the options you need, click OK. To remove a glyph from a button: 1. Click Remove Glyph. KeypadBuilder v2. 1 47 Mio R-1 Application Operations 3. Click Update to confirm your changes. Creating The Engraving File With a new KeypadBuilder project file open, click Engraving in the Navigation Pane. 1. By clicking on a button in the Keypad Device area, select a button you wish to engrave. The button field cannot be edited, it is set by the firmware for the keypad device selected. If you have already set the Display Configuration module, the Display field may already be populated. In the Font Selection drop down menu, select between placing a symbol, AMX Icon 2, or text, Arial, Arial Narrow, or Arial Unicode MS. If you selected a text font, type the text you want displayed in the Text field. Either select the symbol from the list or type the corresponding keyboard character in the Text field. Buttons can have more than one character. The KeypadBuilder Engraving module supports the engraving of its listed supported OS languages. You must have the language loaded on you OS and then use Unicode to render the text on the button. 3. Click on the Scale drop down menu and select in a range from 0. 5 to 1. 5. To preview the . DXF file as it appears to the engraver, click Preview. . . Within the Export DXF File dialog window, set the destination directory for the file. For example: C:\(Media Room)-S12-D0-SB0-DB0-CElite Taupe. DXF Anatomy of A DFX File C:\ (Media Room) S12 D0 SB0 DB0 CElite Taupe Destination directory for the . DXF file. Click OK to save changes to the Engraving module and return to the Navigation Pane. 48 KeypadBuilder v2. 1 Mio R-1 Application Operations Creating Complex-Script Glyphs To create a glyph for use as a menu item: 1. 4. With a KeypadBuilder project open, click Display Configuration from the navigation pane. [. . . ] goto top - the list box navigation moves up to the first item in the list. goto bottom - the list box navigation moves down to the last item in the list. Feedback - Select the type of feedback to associate with this button (channel, inverted channel, always on, momentary, blink, or none). KeypadBuilder v2. 1 111 Mio Modero DMS Application Operations States Tab The States tab is the text and how it is to be displayed on the keypad device for both the Off and On states. Off State: Text - This text field box is the text to be displayed when the channel is in the Off state. Justification - The text is displayed on the keypad device as either Left, Center or Right. [. . . ]