User manual AMX NXA-UPS1500 UNINTERRUPTIBLE POWER SUPPLY

[. . . ] Operation/Reference Guide NXA-UPS1500 Uninterruptible Power Supply US version (110 Vac) Int'l version (220 Vac) Last Revised: 11/17/2006 AMX Limited Warranty and Disclaimer AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase from AMX, with the following exceptions: · · · Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the display and touch overlay components that are warranted for a period of one (1) year. Disk drive mechanisms, pan/tilt heads, power supplies, and MX Series products are warranted for a period of one (1) year. AMX Lighting products are guaranteed to switch on and off any load that is properly connected to our lighting products, as long as the AMX Lighting products are under warranty. AMX does guarantee the control of dimmable loads that are properly connected to our lighting products. [. . . ] Load/Battery Level Indication Control Button 1 7 14 3 4 15 6 2 1 FIG. 2 Elements Of The Front Panel LCD NXA-UPS1500 Uninterruptible Power Supply 3 NXA-UPS1500 Uninterruptible Power Supply 4 NXA-UPS1500 Uninterruptible Power Supply IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important Notice The UPS has its own internal energy source (battery). Should the battery be switched on when no AC power is available, there could be voltage at the output sockets. Please make sure that the input voltage of the UPS matches the supply voltage. To eliminate any overheating of the UPS, keep all ventilation openings free from obstruction, and do not store "things" on top of the UPS. Make sure the UPS is installed within the proper environment as specified (0-40° C and 3090% non-condensing humidity). Install the UPS indoors as it is not designed for installation outdoors. Install the UPS away from objects that give off excessive heat and areas that are excessively wet. The battery will discharge naturally if the system is unused for any length of time. When installed and being used, the batteries will be automatically recharged and kept in top condition. Make sure the UPS is completely turned off when moving the UPS from one place to another. It might cause electrical shock if the output is not cut completely. Storage Instructions For extended storage through moderate climate, the batteries should be charged for 12 hours every 3 months by plugging the UPS power cord into the wall receptacle and turn on input breaker on front panel. Repeat this procedure every 2 months under high temperature environment. NXA-UPS1500 Uninterruptible Power Supply 5 IMPORTANT SAFETY INSTRUCTIONS 6 NXA-UPS1500 Uninterruptible Power Supply Setting Up The NXA-UPS1500 Setting Up The NXA-UPS1500 Place the UPS Properly The UPS should be placed in a well-ventilated & low humid environment. Unpacking 1. Standard Package includes: User's Manual AC Input Power Cord Accessories for Tower and Rack Mount Accessories for Tower and Rack Mount FIG. 3 Accessories for Tower and Rack Mount This unit may require at least two people to install due to its weight. NXA-UPS1500 Uninterruptible Power Supply 7 Setting Up The NXA-UPS1500 Selecting Installation Position It is necessary to select a proper environment to install the unit, in order to minimize the possibility of damage to the UPS and extend the life of the UPS (FIG. 4). · Keep at least 20cm (8") clearance from the rear panel of the UPS from the wall or other obstructions. · Do not block the air-flow to the ventilation openings of the unit. · Please ensure that the installation site environmental conditions are in accordance with the UPS working specifications to avoid overheat and excessive moisture. · Do not place the UPS in a dusty or corrosive environment or near any flammable objects. 4 Selecting Installation Position UPS Setup The UPS offers a flexible form factor enabling integration into a wide variety of environments (FIG. 5 UPS Setup If you are installing the UPS in a tower, continue to the following section, "Tower Setup", otherwise; continue to "Rack-Mount Setup". 8 NXA-UPS1500 Uninterruptible Power Supply Setting Up The NXA-UPS1500 Tower Setup Tower Setup - Step One FIG. 7 Tower Setup - Step 2 NXA-UPS1500 Uninterruptible Power Supply 9 Setting Up The NXA-UPS1500 Rack-Mount Setup Rack-Mount Setup - Step One FIG. [. . . ] The following precautions should be observed when working on batteries: a. Disconnect charging source prior to connecting or disconnecting battery terminals. EPM Specifications EPM connectors are color coded as shown below. Do not try to install the EPM with connectors that are a different color from the EPM connector in the UPS. Nominal System Voltage: 24V Connector color: Red(+), Black (-) 24 NXA-UPS1500 Uninterruptible Power Supply NXA-UPS1500 EPM Installation EPM - Installation and Operation The packing condition and the external outlook of the unit should be inspected carefully before installation. 12. 5~50 kgs, be cautious when unpacking and lifting the unit to avoid injury. The EPM includes accessories for tower and rack mount (FIG. [. . . ]