User manual DOMETIC CRAMER PROPANE GAS BUILT-IN-COOKERS
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DOMETIC CRAMER PROPANE GAS BUILT-IN-COOKERS. We hope that this DOMETIC CRAMER PROPANE GAS BUILT-IN-COOKERS user guide will be useful to you.
You may also download the following manuals related to this product:
DOMETIC CRAMER PROPANE GAS BUILT-IN-COOKERS INSTALLATION (472 ko)
Manual abstract: user guide DOMETIC CRAMER PROPANE GAS BUILT-IN-COOKERS
Detailed instructions for use are in the User's Guide.
[. . . ] (Professional installation is required to capture and recharge the refrigerant. ) Now - The new self-sealing Quick-Connect coupling uses synthetic seals and metal threads, so the couplings can be removed and reconnected as often as needed with no loss of refrigerant. (Professional installation is not required when all couplings in the system are Quick-Connect. ) Self-sealing Quick-Connect Adapter Kits (P/N 755570000) are available for replacement cooling units or evaporators that join older "one-shot" units to their new self-sealing counterparts. [. . . ] (Professional installation is required to capture and recharge the refrigerant. )
New Quick-Connect Adapter Kit (P/N: 755570000)
HOW THE QUICK-CONNECT COUPLERS WORK
When disconnected, spring-loaded valve assemblies in the male and female coupling halves are sealed to prevent refrigerant loss and the inclusion of air or foreign materials. A spring in the male coupling half presses the bonded poppet against sealing surface "A" of the coupling body. Likewise, a spring in the female coupling half presses the sleeve against sealing surface "B" of the stem valve head. When partially connected, the sealing surface of the male coupling body contacts the bonded seal of the female coupling's sleeve assembly as the two coupling halves are threaded together. At the same time, the stem valve head in the female coupling assembly contacts the male coupling's bonded poppet, forcing air out of the coupling. Generously LUBRICATE the synthetic seal and threads of fittings in both the S2 male and S5 female couplings with refrigeration oil. Thread coupling halves together by hand to ensure proper mating of threads. Using the 7/8" wrench on the male coupling body hex (holding the male coupling hex stationary) and the 15/16" wrench on the female coupling nut, tighten (clockwise) the female coupling nut until the coupling halves "bottom out " or a definite resistance is felt. This will require about 6 full turns.
IMPORTANT:
Do not rotate the S2 male or S5 female coupling bodies during connection. Only rotate the coupling nut on the S5 female coupler.
D
7.
Using a marker or ink pen, mark a line lengthwise from the coupling hex to the bulkhead. [. . . ] This will require about 6 full turns.
IMPORTANT:
Do not rotate the S2 male or S5 female coupling bodies during connection. Only rotate the coupling nut on the S5 female coupler.
D
7.
Using a marker or ink pen, mark a line lengthwise from the coupling hex to the bulkhead. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DOMETIC CRAMER PROPANE GAS BUILT-IN-COOKERS
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DOMETIC CRAMER PROPANE GAS BUILT-IN-COOKERS will begin.