User manual EPSON EMP-5300 annexe 1
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual EPSON EMP-5300. We hope that this EPSON EMP-5300 user guide will be useful to you.
You may also download the following manuals related to this product:
EPSON EMP-5300 (1363 ko)
EPSON EMP-5300 EMP MONITOR MANUAL (1989 ko)
EPSON EMP-5300 (1578 ko)
EPSON EMP-5300 annexe 2 (1377 ko)
Manual abstract: user guide EPSON EMP-5300annexe 1
Detailed instructions for use are in the User's Guide.
[. . . ] (Warm-up in progress)
4
Power
5 Turn on the power for the
input source.
In the case of a VCR, press the PLAY button.
2
3
Tip
If a laptop computer or a computer with a LCD screen has been connected to the projector, you may need to change the output destination for image signals depending on the computer keys ( The , and other displays are situated on the computer keys) or the computer's settings. The output destination can normally be changed by holding down the computer's and pressing one of the Function keys. Once the source has been changed, after a short wait the projector will start projecting. [. . . ] For details, refer to the documentation provided with your computer.
If images do not appear . . .
Press the button that corresponds to the port into which the image device is connected to change the input signal.
4
Projector
Remote Control
If you have other problems . . .
Refer to the online Help information.
Help
Help
Examples of changing output NEC Panasonic TOSHIBA IBM SONY FUJITSU Macintosh
After restarting the computer, change the Control Panel monitor and sound settings so that Mirroring is active.
Help
Help
Press the or and then follow the instructions.
Projector Remote Control
* Refer to Troubleshooting.
Projecting
Adjustment
Pages 37-40 of Owner's Manual
Adjusting the projection angle
Lift the front of the projector while pulling up the foot adjust lever, adjust the amount extension or retraction of the front foot, then adjust the projector's projection angle.
5
Tip
If you change the projection angle, you may get keystone distortion in the
Keystone
To make fine adjustments:
Becomes lower
images. You can use the on the projector's control panel to correct keystone distortion.
See page 7.
To store the extended front feet, pull up the foot adjust lever and then slowly lower the front panel.
Becomes higher
Adjusting the image size and focus
Projection position adjustment (up/down)
Image size adjustment
Focus adjustment
Automatically adjusting computer images to the optimum settings
Press on the operation panel or open the cover on the remote control and press automatically adjust the tracking, the display position and the synchronization. to
6
Projector
Remote Control
Other adjustments
Press on the operation panel or open the cover on the remote control and press to display the setting menu on the projection screen. Then adjust the required settings, such as brightness, contrast and sharpness.
Using the on-screen menus
Menu screen Projector panel operations
Move up Return Move left
Remote control
Select /Execute Move up
Move left
Move right
Move right Select/Execute Move down Move down Return
Projector
Remote Control
Adjustment / Turning Off the Projector
Adjustment
Correcting keystone distortion Page 38 of Owner's Manual
If the images have keystone distortion . . .
Keystone
Press
on the projector's control panel to correct the keystone distortion.
7
Tip
When keystone correction is carried out, the projected image will become smaller. If the images become uneven in appearance after keystone correction is carried out, decrease the Sharpness setting.
Keystone
Projector
When the top area is spread open.
Keystone
When the bottom area is spread open.
Keystone
Turning Off the Projector
Page 35 of Owner's Manual
1
Turn off the power for the equipment connected to the projector.
Power
8
2
Press the
Power
twice to turn off the projector's power.
Press
once to display the confirmation message in order to prevent miss-operations.
Power
Press it once more to switch off the power supply. It is possible to switch off the power supply by pressing The twice consecutively.
will start flashing orange. (Cool-down in progress)
3
Check that the is lit steadily with an orange color, and then disconnect the power cord.
If the power cord is disconnected while the is still flashing orange, it may cause problems with projector operation. * Set the R/C switch on the remote control to the OFF position.
(Operation Indicator)
Adjustment / Turning Off the Projector
Functions for Enhancing Projection
Wireless mouse Effect E-Zoom A/V Mute
This projector is equipped with a variety of useful functions for enhancing projection. Then select the type of screen to be displayed when projection is being stopped. The default setting is the black screen.
Functions for Enhancing Projection
Troubleshooting
Page 42 of Owner's Manual
Viewing the online help
This projector is provided with an online help function which can be used when you have a problem using the projector.
Help Help
Help Help
13
1 Press
or
.
2 Select the item to view.
Press the on the projector's control panel. Or tilt the on the remote control.
Projector
(HELP Menu) Help for the image Help for the sound Language selection(Language) If you follow the instructions to solve the problem unsuccessfully, unplug the power from the wall outlet and contact with your local dealer.
Remote Control
3 Accept the selected item.
Press the on the projector's control panel. Or press the on the remote control.
:Select
:Enter
:Exit
(HELP Menu) An image does not appear on the Screen. (cut off/too big/too small/partial) The colors of the image are not correct. :Select :Enter :Return :Exit
4 The selected item will appear
on the screen.
Checking the indicators
Page 70 of Owner's Manual
The projector is equipped with indicators that alert you to problems with projector operation. The following tables show what the indicators mean and how to remedy problems that they indicate.
14
Lamp Indicator
Indicator status Problem and remedy
Lamp error. *2 The power has not been switched on or normal projection is in progress.
Operation indicator Lamp indicator Temperature indicator
Blinking in Red Blinking in Orange Extinguished
Operation Indicator
Indicator status
Illuminated in Orange
Temperature Indicator
Problem and remedy Indicator status Problem and remedy
Excessive internal temperature (overheating). [. . . ] *2 The power has not been switched on or normal projection is in progress.
Operation indicator Lamp indicator Temperature indicator
Blinking in Red Blinking in Orange Extinguished
Operation Indicator
Indicator status
Illuminated in Orange
Temperature Indicator
Problem and remedy Indicator status Problem and remedy
Excessive internal temperature (overheating). After re-inserting it, press the and turn on the power again.
Power
Standby condition. Projection will start a few moments after has been pressed.
Power
Illuminated in Red
Blinking in Orange Illuminated in Green Blinking in Green Blinking in Red Extinguished
Cool-down in progress. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE EPSON EMP-5300
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual EPSON EMP-5300 will begin.