User manual HONEYWELL T8131C
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HONEYWELL T8131C. We hope that this HONEYWELL T8131C user guide will be useful to you.
Manual abstract: user guide HONEYWELL T8131C
Detailed instructions for use are in the User's Guide.
[. . . ] 15 Limited One-Year Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Back Cover
3
69-0812--2
Programming Thermostat
NOTE: When batteries are installed, your T8131 Thermostat can be programmed in your hand (armchair programming), or when it is mounted on the wall. Batteries are not required for normal thermostat operation; however, installed batteries are recommended to retain your personal temperature program in memory if ac power is lost. When you program the thermostat, set one schedule for weekdays and another for weekends, because your temperature requirements probably vary. [. . . ] 2 The temperatures cannot be set any higher than 88°F (31°C) or any lower than 45°F (7°C). NOTE: If you decide not to program the thermostat, it automatically controls heating at 68°F (20°C) and cooling at 78°F (26°C), 24 hours a day.
7
69-0812--2
T8131C Programming Guide
NOTE: Batteries are required only for armchair programming, and to retain your personal temperature schedule in memory if ac power is lost. Remove the battery door (on the thermostat left side) using a coin at the bottom. Set Current Time/Day To set time, press and release
Set
Set Clock/Day
Ahead
once, and press
Back
until current time shows; to set
Run until current day shows; then press Program .
Ahead Back
day, press and release Clock/Day again, and press Heating Program With system switch at HEAT, press and release on display.
Weekday Schedule
once. WAKE, MON-FRI and SET appear
8
69-0812--2
Ahead
Warmer
Press
Back
to program WAKE time and
Cooler
to program WAKE temperature for Mon-Fri.
Repeat sequence for LEAVE, RETURN, and SLEEP.
Weekend Schedule
Ahead
Press
until SAT SUN, WAKE and SET appear on display. Press
Back
Warmer
to program
WAKE time and press SLEEP.
to program WAKE temperature for Sat-Sun. Repeat sequence for
Cooler
Cooling Program With system switch at COOL, follow the same instructions as for the Heating Program.
Run After programming, adjust fan and system switches, as desired. Press and release Program to start the program.
9
69-0812--2
A quick guide for operating or making changes follows: NOTE: Set system switch to HEAT or COOL to perform the following:
Warmer
Temporarily Change temperature for current period only--press
Run itself at next scheduled change; to cancel sooner, press Program . Hold Temp ,
; temperature cancels
Cooler
Warmer Cooler
Hold a temperature indefinitely--press
Run ; to cancel, press Program .
Check Current Temperature Setting--press
Weekday Schedule Weekend Schedule
Present Setting
.
Check Programs--press
Run press Program .
then
repeatedly to see each time and temperature; then
10
69-0812--2
Cancel a program--press press
Clear
Weekday Schedule
then
Weekend Schedule
until program to cancel shows; then
.
Check Usage -- press
Usage
to determine length of time heat or air conditioning has been on
since midnight; press again for yesterday's usage, and again for cumulative usage. Press
Clear
Run to clear cumulative reading, if desired; then press Program .
Permanently Change a program--repeat steps in Heating Program or Cooling Program sections (pages 5 and 6), as applicable.
Run Return to normal program or start program --press Program .
11
Questions?Call Honeywell Customer Assistance 1-800-468-1502.
69-0812--2
Setting Fan and System Switches
First set the fan switch.
Auto On AUTO: Normal setting for most homes. A single-speed fan turns on automatically with the air conditioner or furnace. A two-speed fan usually runs on high with the air conditioner and runs on low with the furnace.
Then set the system switch.
COOL: The thermostat controls your air conditioning system. HEAT: The thermostat controls your heating system.
Cool Off Heat
Cool
Off
Heat
Auto ON: The fan runs continuously. Use for improved air circulation during special occasions or for more efficient electronic air cleaning.
On
Cool Off Heat
12
69-0812--2
Installing Batteries
IMPORTANT Batteries are required only for armchair programming and to retain your personal temperature schedule in memory if ac power is lost.
· Use two AA alkaline batteries; nonalkaline batteries do not last as long. · Use a coin to remove the battery door.
REMOVING BATTERY DOOR
M1719C
13
69-0812--2
To remove the batteries, press down on the left ends of the batteries. If you insert new batteries within 20 to 30 seconds of removing the old ones, the thermostat does not require reprogramming. However, if the display is blank, the batteries are dead or incorrectly installed and the thermostat requires reprogramming. · Install the fresh batteries, as shown, making sure positive and negative terminals are oriented correctly. · Replace the batteries once a year to assure memory retention if ac power is lost.
INSTALL TWO AA ALKALINE BATTERIES AS SHOWN
POWER
M9203
14
69-0812--2
Troubleshooting Guide
IF. . . s Check that the green light emitting diode (LED) located to the left of the LCD is lit, indicating the thermostat is powered properly.
Temperature display will not go lower s The temperature setting limit was reached. The setting than 45°F (7°C) or higher than 88°F range is 45°F to 88°F (7°C to 31°C). [. . . ] THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO THE ONE YEAR DURATION OF THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. If you have any questions concerning this warranty, please write our Customer Assistance Center, Honeywell Inc. , P. O. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HONEYWELL T8131C
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HONEYWELL T8131C will begin.