User manual HP COMPAQ PRESARIO V5030EA
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual HP COMPAQ PRESARIO V5030EA. We hope that this HP COMPAQ PRESARIO V5030EA user guide will be useful to you.
You may also download the following manuals related to this product:
HP COMPAQ PRESARIO V5030EA (3637 ko)
HP COMPAQ PRESARIO V5030EA (3611 ko)
HP COMPAQ PRESARIO V5030EA (2158 ko)
HP COMPAQ PRESARIO V5030EA (3632 ko)
HP COMPAQ PRESARIO V5030EA (3608 ko)
HP COMPAQ PRESARIO V5030EA (3592 ko)
HP COMPAQ PRESARIO V5030EA (3592 ko)
Manual abstract: user guide HP COMPAQ PRESARIO V5030EA
Detailed instructions for use are in the User's Guide.
[. . . ] b
Maintenance and Service Guide
Compaq Presario V5000 Notebook PC
Document Part Number: 407511-002
June 2006
This guide is a troubleshooting reference used for maintaining and servicing the computer. It provides comprehensive information on identifying computer features, components, and spare parts; troubleshooting computer problems; and performing computer disassembly procedures.
© Copyright 2006 Hewlett-Packard Development Company, L. P. AMD, Sempron, Turion, and combinations thereof, are trademarks of Advanced Micro Devices, Inc. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. [. . . ] Lift up the front edge of the base enclosure 1 until it disengages from the top cover. Lift the base enclosure 2 straight up and remove it.
Removing the Base Enclosure
Reverse the above procedure to install the base enclosure.
Maintenance and Service Guide
545
Removal and Replacement Procedures
5. 14 Bluetooth Module
Bluetooth Module Spare Part Number Information
Bluetooth module (includes Bluetooth module cable) 397922-001
1. Prepare the computer for disassembly (Section 5. 3), and then remove the following components: a. Base enclosure (Section 5. 13)
546
Maintenance and Service Guide
Removal and Replacement Procedures
2. Remove the two Phillips PM1. 5×3. 0 screws 1 that secure the Bluetooth module to the top cover. module cable is The Bluetooth also available in included with the Bluetooth module and is the Cable Kit, spare part number 407775-001.
Removing the Bluetooth Module
Reverse the above procedure to install the Bluetooth module.
Maintenance and Service Guide
547
Removal and Replacement Procedures
5. 15 System Board
System Board Spare Part Number Information
For use with defeatured models For use with full-featured models 430150-001 430151-001
the system board, the following When replacing removed from the ensure thatsystem board and components are defective installed on the replacement system board: Memory modules (Section 5. 6) Mini PCI communications module (Section 5. 7) RTC battery (Section 5. 8) Power connector cable (Section 5. 15) Heat sink (Section 5. 18) Processor (Section 5. 19) Fan assembly (Section 5. 20) Fan assembly (Section 5. 20) PC Card assembly (Section 5. 21)
1. Prepare the computer for disassembly (Section 5. 3), and then remove the following components: a. Base enclosure (Section 5. 13)
548 Maintenance and Service Guide
Removal and Replacement Procedures
2. Release the ZIF connector 1 to which the LED board cable is connected and disconnect the LED board cable 2 from the system board.
Disconnecting the LED Board Cable
Maintenance and Service Guide
549
Removal and Replacement Procedures
4. connector cable is included with the Cable Kit, The powernumber 407775-001, and is also available using spare part spare part number 415564-001. Remove the power connector 2 from the clip in the base enclosure and remove the cable from the routing channel 3 in the top cover.
Removing the Power Connector Cable
550
Maintenance and Service Guide
Removal and Replacement Procedures
7. Remove the modem connector 1 from the clip in the top cover and remove the modem connector cable 2 from the routing channel in the top cover.
Removing the Modem Connector Cable
Maintenance and Service Guide
551
Removal and Replacement Procedures
8. Remove the four PM2. 5×5. 0 screws 2 that secure the system board and USB/audio board to the top cover. is spare The USB/audio boardwithavailable usingmodels)part numbers 417027-001 (for use full-featured and
417028-001 (for use with defeatured models). The USB/audio board cable cable is included with the USB/audio board and is also available in the Cable Kit, spare part number 407775-001.
Removing the USB/Audio Board
552
Maintenance and Service Guide
Removal and Replacement Procedures
11. Use the optical drive connector 1 to lift the left side of the system board 2 until it clears the top cover. Slide the system board 3 to the left at an angle and remove it.
Removing the System Board
Maintenance and Service Guide
553
Removal and Replacement Procedures
13. Position the system board with the ExpressCard and PC Card assemblies facing up and the battery connector toward you. Disconnect the following cables from the system board: 1 USB/audio board cable 2 Modem cable 3 Speaker cable included with the The USB/audio board cableinisthe Cable Kit, spareUSB/audio board and is also available part number 407775-001. The modem connector cable is available in the Cable Kit, spare part number 407775-001.
Disconnecting the USB/Audio Board, Speaker, and Modem Cables
554
Maintenance and Service Guide
Removal and Replacement Procedures
15. Lift the system board 1 and seperate the speakers 2 from the system board.
The speakers are available using spare part number 407785-001.
Removing the Speakers
Reverse the above procedure to install the system board.
Maintenance and Service Guide
555
Removal and Replacement Procedures
5. 16 Display Release Button
The display release button components are spared with the top cover.
1. Prepare the computer for disassembly (Section 5. 3) and then remove the following components: a. [. . . ] Slide the backlight out of the backlight frame.
Removing the Backlight
C12
Maintenance and Service Guide
Display Component Recycling
19. Release the tape 4 that secures the LCD panel to the LCD rear panel.
Releasing the LCD Panel
Maintenance and Service Guide
C13
Display Component Recycling
23. Recycle the backlight and LCD panel.
C14
Maintenance and Service Guide
D
Connector Pin Assignments
Table D-1 Universal Serial Bus
Pin 1 2
Signal +5 VDC Data
Pin 3 4
Signal Data + Ground
Maintenance and Service Guide
D1
Connector Pin Assignments
Table D-2 RJ-45 (Network)
Pin 1 2 3 4
Signal Transmit + Transmit Receive + Unused
Pin 5 6 7 8
Signal Unused Receive Unused Unused
D2
Maintenance and Service Guide
Connector Pin Assignments
Table D-3 S-Video-Out
Pin 1 2 3 4
Signal TV-Ground TV-CVBS TV-Ground TV-Ground
Pin 5 6 7
Signal TV-CD TV-Ground TV-YD
Maintenance and Service Guide
D3
Connector Pin Assignments
Table D-4 External Monitor
Pin 1 2 3 4 5 6 7 8
Signal Red analog Green analog Blue analog Not connected Ground Ground analog Ground analog Ground analog
Pin 9 10 11 12 13 14 15
Signal +5 VDC Ground Monitor detect DDC 2B data Horizontal sync Vertical sync DDC 2B clock
D4
Maintenance and Service Guide
Connector Pin Assignments
Table D-5 RJ-11 (Modem)
Pin 1 2 3
Signal Unused Tip Ring
Pin 4 5 6
Signal Unused Unused Unused
Maintenance and Service Guide
D5
Connector Pin Assignments
Table D-6 Audio-In (Microphone)
Pin 1 2
Signal Audio signal in Audio signal in
Pin 3
Signal Ground
Table D-7 Audio-Out (Headphone)
Pin 1 2
Signal Audio out, left channel Audio out, right channel
Pin 3
Signal Ground
D6
Maintenance and Service Guide
E
Power Cord Set Requirements
3-Conductor Power Cord Set
The wide range input feature of the computer permits it to operate from any line voltage from 100 to 120 or 220 to 240 volts AC. The power cord set included with the computer meets the requirements for use in the country where the equipment is purchased. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE HP COMPAQ PRESARIO V5030EA
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual HP COMPAQ PRESARIO V5030EA will begin.