User manual ICOM MR-570R
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ICOM MR-570R. We hope that this ICOM MR-570R user guide will be useful to you.
You may also download the following manuals related to this product:
ICOM MR-570R BROCHURE (995 ko)
Manual abstract: user guide ICOM MR-570R
Detailed instructions for use are in the User's Guide.
[. . . ] MR-570R
s Display information
Tuning level indicator Screen range readout Fixed ring range readout*1
OPERATING GUIDE
Heading indicator
3
(1)
NM
2530° T
TM Mode indicator*5 Cross line cursor
Heading line Alarm zone*2 EBL1/2
Own ship vector indicator
VRM1/2
Waypoint marker*3
MOB symbol
Fixed range rings*1 EBL1/VRM1, EBL2/VRM2 readouts*4
EBL/VRM1 EBL/VRM2 S0672°R S0162°R 1. 296NM 0. 566NM O:01 O:01
*1 Appears when the "RING" of the FUNCTION menu is turned ON. *3 Appears when the "WPT" of the FUNCTION menu is turned ON. To display the waypoint marker, bearing data and NMEA data with 0183 format is necessary.
*4 This area may differ depending on DATA DISP selection in the FUNCTION menu. Nautical miles (NM) and kilometres (KM) can be selected in the INT. SETTING menu as the distance unit. [. . . ] r Push [TX (SAVE)] to cancel the power save function.
· The save indicator turns OFF.
EBL/VRM1 EBL/VRM2
S0672°R S0162°R
1. 296NM 0. 566NM
O:01 O:01
EBL/VRM1 EBL/VRM2
S0672°R S0162°R
1. 296NM 0. 566NM
O:01 O:01
Scan and standby alternates.
NOTE: When you use the power save function together with the alarm function, the LCD display is turned OFF until an object enters the programmed alarm zone, therefore, more power saving is possible. 00)
14
BASIC OPERATION
4
s Ship speed indication
When the ship speed data with NMEA 0183 format is applied, the radar can display the ship speed. Knots (KT) or kilometres/hour (KM/h) are automatically selected in the normal screen (p. w Push [DOWN] until "DIST UNIT" section becomes highlighted. r Push [MENU] to exit the menu display.
s Long pulse function
To magnify the blips for easier viewing of small targets, the long pulse and echo stretch (p. When the long pulse is used in the 3/4 to 2 NM range, this function magnifies target echoes to the backward direction of the target. 6) w Push [ ]/[ ] until the "PULSE" section becomes highlighted. 6).
s Position indication
When latitude/longitude data with NMEA 0183 format is applied, the radar can display the latitude and longitude of your ship's or cursor position in the bottom of the display. (To display the "CURSOR" position, bearing data is necessary. ) (P. e Push [ ]/[ ] to select SHIP (ship position) or CURS (cursor position). r Push [MENU] several times to exit the menu.
s Bearing setting
The radar bearing interface accepts NMEA, N+1 or AUX data format and the bearing can be used as a magnetic or true north type. When a true north type bearing is used, the variation from magnetic north, etc. , can be adjusted on 0. 1° steps. · Setting the bearing type q Push [MENU] twice to call up "EPA" menu. r Push [ ]/[ ] to select magnetic or true north type.
· All displayed bearing readouts show the selected bearing type.
s Waypoint indication
When waypoint data received from navigation equipment with NMEA 0183 format is applied, the radar can display the waypoint. w Push [ ] until the "DATA DISP" section becomes highlighted. r Push [MENU] twice to exit the menu display.
· Setting the magnetic variation q Push [ ] until the "MAG VAR" section becomes highlighted. w Push [ ]/[ ] to select an "AUTO*" or "MANU. " variation. e When a "MANU. " variation is selected, push [DOWN], then push [ ]/[ ] to set the bearing variation. r Push [MENU] to exit the menu display or push [ ] once to proceed to the bearing input setting.
*NOTE: NMEA data is required for auto variation. 38)
15
5
DISTANCE AND DIRECTION MEASUREMENTS
s Distance measurement
Two measurement procedures are available with this radar. The distance unit, nautical miles (NM) or kilometres (KM) is selected in the "INIT. SETTING" menu (p. Displays a variable range marker. Suitable for accurate measurements from your own ship to a target.
VRM1
VRM2
When the VRM1 and EBL1 selects a target, the center of VRM2 appears at the intersection point. [. . . ] (see left) i Push [MENU] to return to the normal screen.
· DO NOT change the screen range before returning to the normal screen.
8
NM
ENGLISH 24000 SPD ADJ. HV MONITOR HEATER MG TX TIME
4 6 36 8 12 16 24
30. 2 349 47 0. 53 0. 0 1. 2H
32 36
NOTE: When returning to the normal screen, the tuning level indicator automatically adjusts to 85% of the full scale.
s Auto gain adjustment
NOTE: While pushing and holding [MOB] and [TRAILS], push [POWER] to activate the `Auto gain' setting. e Push [ ]/[ ] to adjust the gain to the point where noise just begins to appear on the screen. · Beep tone "Pi pi" emits.
34
ERROR MESSAGE
s Error message list
Message BRG INPUT FAIL*1 TRIG SIGNAL FAIL*1 SHM SIGNAL FAIL*2 VIDEO SIGNAL FAIL*2 POSN INPUT FAIL*1 NO. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ICOM MR-570R
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ICOM MR-570R will begin.