User manual LOWRANCE 60-OHM TERMINATOR Connection Guide
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LOWRANCE 60-OHM TERMINATOR. We hope that this LOWRANCE 60-OHM TERMINATOR user guide will be useful to you.
Manual abstract: user guide LOWRANCE 60-OHM TERMINATORConnection Guide
Detailed instructions for use are in the User's Guide.
[. . . ] Cable connections for Lowrance LMS-480 Sockets with blue socket nuts, and cable plugs with blue locking collars are NMEA 2000 connection types. [. . . ] All unused wires in the 3-way Power/Data Cable should be capped with wire nuts or electrical tape.
Sonar/GPS unit rear view Network socket
Pub. 988-0154-181
SONAR
NETWORK
PWR/DATA
Sonar socket Blue Power/Data socket
LGC-2000 25' Extension Cable
NMEA 0183 Data Cable. Three wires: red (+), black ( ground), shield (bare, ground). Cable label says "NMEA 2000 Power. " Used to power the GPS module and/or a NMEA 2000 network buss. This is packed with the LMS-480DF and is optional for the LMS-480.
Blue or gray
Gray Blue
60
60-ohm terminator
This figure corrects the drawing on page 35 in the LMS-480 manual, part 988-0151-181. The manual showed the sonar and power/data sockets in the wrong place, and listed the wrong speed sensor model.
Main Power Supply Cable. [. . . ] Printed in USA 050504
LGC-2000 GPS antenna module
If sonar/GPS unit is not connected to a powered NMEA 2000 network, you must connect the NMEA 2000 Power Cable to a 12-volt power source in order for the LGC-2000 to work. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE LOWRANCE 60-OHM TERMINATOR
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LOWRANCE 60-OHM TERMINATOR will begin.