Detailed instructions for use are in the User's Guide.
[. . . ] 988-0064-362 www. lowrance. com
Installation and Operation Instructions
Multi-function Gauge
LMF-200
Copyright © 2006 Lowrance Electronics, Inc. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Lowrance Electronics. Any unauthorized commercial distribution of this manual is strictly prohibited. Lowrance® is a registered trademark and LowranceNet TM is a trademark of Lowrance Electronics, Inc. [. . . ] Economy Speed (Eco spd) The Economy Speed menu allows you to choose what speed source the LMF-400 will use to calculate Fuel Economy. A NMEA 2000 GPS module, like the LGC-2000, measures ground speed The EP-25 Paddlewheel and NMEA 2000 Pitot Tube measure water speed. Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press MENU. The menu has three options: Water Spd (Water Speed), Pitot Speed and Gnd Spd (Ground Speed). A NMEA 2000 GPS module measures ground speed, while a paddlewheel, like the EP-25 measures water speed. Select the desired speed source and press MENU, which will take you back to the main display. Fuel Remaining Source (FRem Src) The Fuel Remaining source function allows you to select the device used to measure the amount the fuel remaining in the tank. NOTE: If you plan to use a fluid level sensor for a fuel tank, you must switch the fuel remaining source to Fuel Level. If you want to use the EP-10 Fuel Flow, EP-50 Storage Device or the NMEA 2000 Suzuki Engine Interface to measure fuel remaining, select Engine/FFlow from the Fuel Remaining Source menu. Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press MENU. That will open the FRem Src menu, which has two options: Eng/FFlow and Fuel level. Select the desired fuel remaining source and press MENU, which will take you back to the main display. Reset Trip Fuel (Rst trip f) A few sensors, like the Suzuki Engine Interface, EP-10 Fuel Flow and EP-50 Storage Device keep a running total of fuel used for a trip. By using the Reset Trip command, you can reset to zero the running total of fuel used on a trip. Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press MENU. Press MENU, which will reset the trip fuel used to zero and take you back to the main display. Reset Seasonal Fuel (Rst Seas) A few sensors, like the Suzuki Engine Interface, EP-10 Fuel Flow and EP-50 Storage Device keep a running total of fuel used for a season. By using the Reset Seasonal command, you can reset to zero the running total of fuel used for a season. Press MENU, use the UP and DOWN keys to select SYSTEM SETUP and press MENU. If you have more than one engine, the Select Engine menu will appear with up to four options: All Engines, Port, Cen (Center) and Stbd (Starboard). Press MENU, which will take you back to the main display.
Customizing Pages
The customizing pages feature allows you to choose what data will be displayed and how it will be displayed on select pages. Pages that can be customized include: Single Digital, Dual Digital, Gauge, Fuel Manager and Trim Tab pages can all be customized. [. . . ] SKELLY DRIVE, TULSA, OK 74128 (800) 324-1356
63
How to Obtain Service. . .
. . . in the USA:
We back your investment in quality products with quick, expert service and genuine Lowrance parts. If you're in the United States and you have technical, return or repair questions, please contact the Factory Customer Service Department. Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. [. . . ]