User manual MAXTOR DVC10
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MAXTOR DVC10. We hope that this MAXTOR DVC10 user guide will be useful to you.
Manual abstract: user guide MAXTOR DVC10
Detailed instructions for use are in the User's Guide.
[. . . ] Application Note:
DVC-10
Camera Interface Overview
· · · · · ·
Interfacing non-standard cameras to Matrox Pulsar May 9, 1997
755 x 484 x 10-bit or 8-bit @30 fps (max. ) Digital video output (RS-422) Interlaced Internal hsync, vsync, and pixel clock signals (all RS-422) supplied externally 14. 318 MHz pixel clock rate 2 modes of operation: Continuous and triggered (asynchronous reset)
Camera Interface Details
Mode 1: Continuous mode
Video LVAL FVAL PIXEL CLOCK
DVC-10
Matrox Pulsar
(with PULSAR/DIG/MOD)
· · · · ·
· ·
752 x 480 x 10-bit or 8-bit @30 fps (max. ) Digital video output (RS-422) Interlaced Continuous video Matrox Pulsar receiving RS-422 hsync (Line Valid or LVAL), vsync (Frame Valid or FVAL) and pixel clock signals from camera DCF used for 10-bit: DVC10_D. DCF DCF used for 8-bit: DVC8_D. DCF
Mode 2: Trigger mode (asynchronous reset)
Video LVAL
DVC-10
FVAL EXPOSURE PIXEL CLOCK
Matrox Pulsar
(with PULSAR/DIG/MOD)
TTL external trigger
· · · · ·
· ·
752 x 240 x 10-bit Digital video output (RS-422) Non-interlaced Matrox Pulsar receiving RS-422/TTL external trigger signal Matrox Pulsar receiving RS-422 hsync (Line Valid or LVAL), vsync (Frame Valid or FVAL) and pixel clock signals from camera Matrox Pulsar sending exposure signal to camera DCF used: DVC_10i. DCF
Application Note:
DVC-10
Cabling Requirements
Interfacing non-standard cameras to Matrox Pulsar May 9, 1997
Mode 1:Continuous mode
·
PULSAR/DIG/MOD required for digital data in RS-422 format.
The following connections should be made between the 37-pin DB-37 connector of the camera and the 68-pin connector of PULSAR/DIG/MOD: PULSAR/DIG/MOD (68-pin connector) Pin name
CLKIN+ CLKIN HSYNC+ HSYNCVSYNC+ VSYNCGROUND GROUND DATA9+ DATA9DATA8+ DATA8DATA7+ DATA7DATA6+ DATA6DATA5+ DATA5DATA4+ DATA4DATA3+ DATA3DATA2+ DATA2DATA1+ DATA1DATA0+(LSB) DATA0- (LSB) GROUND TTL_EXP1 TTL_USER0 TTL_USER1 TTL_USER2
DVC-10/DVC-08 Pin no.
29 63 26 60 25 59 01 68 08 42 09 43 10 44 11 45 13 47 14 48 15 49 16 50 19 53 20 54 12 66 31 32 33
(DB-37 plug) Pin name
CLK+ CLKHSYNC+ HSYNCVSYNC+ VSYNCGND GND DB9+ DB9DB8+ DB8DB7+ DB7DB6+ DB6DB5+ DB5DB4+ DB4DB3+ DB3DB2+ DB2DB1+ DB1DB0+ DB0GND RESET MODE CONTROL0 MODE CONTROL1 MODE CONTROL2
Pin no.
01 20 02 21 03 22 16 35 15 34 14 33 13 32 12 31 11 30 10 29 09 28 08 27 07 26 06 25 16 17 18 37 19
PUL-CID-031
2
Application Note:
DVC-10
Interfacing non-standard cameras to Matrox Pulsar May 9, 1997
Mode 2:Trigger mode (asynchronous reset)
·
·
· ·
IMG-7W2-TO-5BNC cable required for TTL external trigger source and PULSAR/DIG/MOD required for digital data, syncs and control signals in RS-422 format. [. . . ] Please verify all interface connections with camera documentation or manual. Contact your local sales representative or Matrox Sales office or Matrox Imaging Applications at 514-822-6061 for assistance.
Corporate Headquarters: Canada and U. S. A. Dorval, Quebec, Canada H9P 2T4 Tel: (514) 685-7230 Fax: (514) 822-6273 Sales Offices: U. K. SL2 4JS Tel: +44 (0) 1753 665500 Fax: +44 (0) 1753 665599 France Matrox France SARL 2, rue de la Couture, Silic 225 94528 Rungis Cedex Tel: (0) 1 45-60-62-00 Fax: (0) 1 45-60-62-05 Germany Matrox GmbH Inselkammerstr. 8 D-82008 Unterhaching Germany Tel: 089/614 4740 Fax: 089/614 9743 Asia Pacific Matrox Asia Liaison Office Rm. [. . . ] 1901, 19/F, Workington Tower, 78 Bonham Strand E. , Sheung Wan, Hong Kong. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MAXTOR DVC10
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MAXTOR DVC10 will begin.