User manual MERCEDES E 300 4MATIC MANUAL 2009
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MERCEDES E 300 4MATIC. We hope that this MERCEDES E 300 4MATIC user guide will be useful to you.
Manual abstract: user guide MERCEDES E 300 4MATICMANUAL 2009
Detailed instructions for use are in the User's Guide.
[. . . ] E-Class
Operator's Manual
Symbols
Trademarks®: RBluetooth® is a registered trademark of Bluetooth SIG Inc.
RESP®
YY
and PRE-SAFE® are registered trademarks of Daimler. is a registered trademark of Prince, a Johnson Controls Company.
This continuation symbol marks a warning or procedure which is continued on the next page. Display Text in displays, such as the control system, are printed in the type shown here.
RHomeLink®
The following symbols are found in this Operator's Manual:
G Warning!
Warning notices draw your attention to hazards that may endanger your health or life, or the health or life of others.
!Highlights hazards that may result in
damage to your vehicle.
i Helpful hints or further information you
may find useful. [. . . ] X Turn mounting element 2 in the cargo rail to N.
Installing: Fold seat backrests 3 forward (Y page 207). X Insert storage box 1 from within the cargo compartment with the opening pointing in direction of travel. X Press locking hooks 4 of storage box 1 into the space between seat backrests 3 and cargo compartment floor 2. X Fold seat backrests 3 to the original position (Y page 208).
212
Controls in detail
Loading and storing
Storage box 1 is additionally held in place from above by the twin roller blind. X Fill storage box 1 with cargo through the opening on the front side. X Fold seat backrests 3 to the original position (Y page 208).
X X
Twin roller blind (wagon)
The twin roller blind contains a cargo net and a cargo compartment cover.
Pull cargo net 1 up and hook it onto mounting 2. Cargo net 1 should then be hooked onto the front mountings.
i You can use cargo net 1 even when the
Cargo net G Warning!
The cargo net cannot hold back heavy loads. Objects which are insufficiently secured could otherwise injure you if they are thrown around in the event of an accident, during hard braking or steering maneuvers.
Cargo compartment cover
To assist loading the cargo area when the cargo compartment cover is closed, the cover will be released and automatically raised/ lowered when opening/closing the tailgate.
Removing: Fold seat backrests 3 forward (Y page 207). X Slide locking hooks 4 of storage box 1 forward out of the retainers. X Pull storage box 1 to the rear and remove it from cargo compartment. When loading the vehicle, make sure not
to load the cargo compartment over the lower edge of the side windows. The twin roller blind could otherwise be damaged when the tailgate is being closed.
1 Cargo net 2 Mounting for cargo net
Z
213
Controls in detail
Loading and storing
Removing the twin roller blind X Roll up cargo net and cargo compartment cover 2. X Fold the driver's side rear seat backrest forward (Y page 207). X Push twin roller blind to the driver's side out of its anchorage on the seat backrest and remove it.
Opening the cargo compartment floor
1 Handle 2 Cargo compartment cover
Rolling up the cargo compartment cover X Use handle 1 to pull cargo compartment cover 2 down into the horizontal position. X Unhook cargo compartment cover 2 from its anchorages on the left and right sides. To do so, pull cargo compartment cover 2 slightly towards the rear and lower it. Pulling out the cargo compartment cover X Pull out cargo compartment cover 2 towards the rear until it engages.
1 Front cargo compartment floor 2 Rear cargo compartment floor 3 Handle
X
Storage space under the cargo compartment floor (wagon, E 63 AMG only)
The vehicle tool kit and jack are stored under the rear cargo compartment floor. A loading tray and a folding box are located under the front cargo compartment floor.
Use handle 3 to open cargo compartment floor 1 or 2.
214
Controls in detail
Loading and storing
Closing the front cargo compartment floor
X
Closing the rear cargo compartment floor
Swing front cargo compartment floor 1 downward. X Push front cargo compartment floor 1 downward on handle 3 until it locks into place.
2 Rear cargo compartment floor 4 Locking in place 5 Hooks 6 Pneumatic spring
X
6 Pneumatic spring 7 Release button
X
Press rear cargo compartment floor 2 slightly forward 4. Pneumatic spring 6 engages, locking rear cargo compartment floor 2 in place. compartment floor is open and hang light luggage items from hooks 5.
i You can transport objects when the cargo
Press release button 7 and swing rear cargo compartment floor 2 downward. X Push front cargo compartment floor 1 downward on handle 3 until it locks into place.
Z
215
Controls in detail
Loading and storing
Removing the rear cargo compartment floor
X
Move rear cargo compartment floor 2 into an almost vertical position (to an angle of 85°). [. . . ] If you use a solution that is more than 55% anticorrosion/antifreeze (freeze protection to approximately -49 [-45]), the engine temperature will increase due to the lower heat transfer capability of the solution. Therefore, do not use more than this amount of anticorrosion/antifreeze. If the coolant level is low, water and MB 325. 0 Anticorrosion/Antifreeze should be used to bring it up to the proper level (have cooling system checked for signs of leakage). Please make sure the mixture is in accordance with label instructions. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MERCEDES E 300 4MATIC
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MERCEDES E 300 4MATIC will begin.