User manual MIELE CVA 4085
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MIELE CVA 4085. We hope that this MIELE CVA 4085 user guide will be useful to you.
Manual abstract: user guide MIELE CVA 4085
Detailed instructions for use are in the User's Guide.
[. . . ] Operating and installation instructions
Built-in coffee machine CVA 4085
To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time.
G
M. -Nr. 40 Displaying the number of cups of coffee already dispensed (Total no. 85
Caring for the environment
Disposal of the packing material
The transport and protective packing has been selected from materials which are environmentally friendly for disposal and can normally be recycled. are disposed of safely and kept out of the reach of babies and young children. [. . . ] The machine is now unlocked and can be used to make drinks again.
Setting the water hardness
For trouble-free operation of the coffee machine, and to ensure that the descaling reminder appears in the display at the appropriate time, it is important to set the water hardness level. The water hardness level indicates how much calcium is dissolved in the water. The higher the calcium content, the harder the water, and the harder the water, the more often the machine will need to be descaled. The machine measures the amount of water which has been taken in (including the amount required for producing steam). The amount of water which the machine can use before it needs to be descaled will depend on the water hardness level set. Less water will be used in hard water areas than in soft water areas.
42
Settings: Customising your machine
Your local water authority will be able to tell you the hardness of water in your area. Alternatively, you can measure the hardness yourself using the enclosed test strip:
^ Dip the strip in your drinking water for approximately a second, then shake off any excess water. If the water is harder than 40 °d / 7. 0 mmol/l, limescale will build up more rapidy than with soft water. Descaling will need to be carried out more regularly than stated to prevent limescale damage to the machine. The machine has four programmable levels:
Level (machine) Hardness (local water) °d mmol/l Water through-flow in litres Steam through-flow in minutes approx. 30 min
Soft 1 Medium 2 Hard 3 Very hard 4
1 (soft) 1 (soft) 2 (medium) 3 (hard) 4 (very hard)
0-3 4-7 7 - 14
0 - 0. 6 0. 7 - 1. 3 1. 3 - 2. 5
14 - 21 2. 5 - 3. 8 above 21 above 3. 8
43
Settings: Customising your machine
To set the correct water hardness level, ^ touch the sensor beside "Settings".
Settings ß Total no. of coffees ß System lock ß Water hardness
^ Touch the sensor beside "Water hardness". ^ Touch the upper or middle sensor on the right until the correct water hardness is visible on the left of the display. ^ Touch the sensor beside "ok" to save the setting.
Selecting or altering a user profile
To cater for different tastes and preferences, you can enter up to 10 individual user profiles and also allocate different settings for amount of coffee, temperature, pre-brewing and portion size to them later (see "Setting the portion sizes"). To set a User profile, ^ touch the sensor beside "Settings".
Settings ß System lock ß Water hardness ß User profile
^ Touch the sensor beside "User profile". The Standard profile is allocated with standard settings.
44
Settings: Customising your machine
Create To create a new User profile, ^ Touch the sensor beside "Set". ^ Touch the middle sensor on the right or left of the display until the first letter is highlighted. ^ Repeat this step until the name you want for the new User profile appears in the display. To delete a letter or number, ^ touch the sensor beside "Delete character". Delete If you want to delete the User profile completely, ^ touch the sensor beside "Delete". As a safety measure, you will be asked if you are sure you want to delete the name. ^ Touch the sensor beside "Yes" if you are sure that you want to delete the selected name. [. . . ] For extra safety it is advisable to install a residual current device (RCD), with a trip current of 30 mA (in accordance with DIN VDE 0664, VDE 0100, Section 739). If the socket is not accessible after installation (depending on country) an additional means of disconnection must be provided for all poles. WARNING: THIS APPLIANCE MUST BE EARTHED
80
Electrical connection U. K. , ZA, IRL
Non-rewireable plugs BS 1363 The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words on the base of the plug (as applicable to the design of plug fitted). [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MIELE CVA 4085
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MIELE CVA 4085 will begin.