User manual MIELE W 4446 WPS
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MIELE W 4446 WPS. We hope that this MIELE W 4446 WPS user guide will be useful to you.
Manual abstract: user guide MIELE W 4446 WPS
Detailed instructions for use are in the User's Guide.
[. . . ] Operating instructions for Washing machine W 4446 WPS
To avoid the risk of accidents or damage to the machine it is essential to read these instructions before it is installed and used for the first time.
G
M. -Nr. 06 732 370
Caring for our environment
Disposal of the packing material
The transport and protective packing has been selected from materials which are environmentally friendly for disposal and can normally be recycled. are disposed of safely and kept out of the reach of babies and young children. Rather than just throwing these materials away, please ensure they are offered for recycling.
Disposal of your old appliance or machine
Electrical and electronic appliances / machines often contain materials which, if handled or disposed of incorrectly, could be potentially hazardous to human health and to the environment. [. . . ] The door can be opened and laundry removed at any time during the anti-crease phase.
1)
Pre-rinse: A pre-rinse without detergent is carried out automatically to remove dust. Run-up to spin: A run-up to spin is carried out before the wash process begins to deflate the pillows. A second rinse is carried out when a temperature of 60°C to 95°C has been selected. A third rinse is carried out when a temperature below 60°C is selected. A third/fourth rinse is carried out if:
2)
3)
4)
there is too much foam in the drum a spin speed lower than 700 rpm has been selected No spin has been selected
5)
A third rinse is carried out if:
No spin has been selected
6)
In the Outerwear programme, laundry is only spun after the main wash.
31
Garment care label symbols
Washing The figure quoted in the bucket is the maximum temperature the garment can be washed at. The number of bars under the symbol indicates the level of agitation permitted. 9 4 c / No bar under the symbol: = normal agitation One bar under the symbol: = reduced agitation Two bars under the symbol: = much reduced agitation Hand wash (if no temperature is specified use the lowest temperature or cold) Do not wash Ironing The number of dots indicates the ironing temperature I H G Hot iron (max sole plate temp. Professional Wet Clean only Do not dry clean Bleaching x { Any oxidising bleaching agent can be used Only use an oxygen based bleach or a non-chlorine bleach Do not bleach
J
h
Drying The number of dots indicates the drying temperature q r s Normal temperature Low temperature Do not tumble dry
z
32
Changing the programme sequence
Cancelling a programme
You can cancel a programme at any time after it has started. ^ Press the Start/Stop button.
Stopped:
Cancel programme Continue OK
Interrupting a programme
^ Switch the machine off with the I-On/ 0-Off button. To continue with the same programme: ^ Switch the machine back on with the I-On/0-Off button.
Changing a programme
Programme After the start of a programme it is no longer possible to select a different programme. Temperature It is possible to select a different temperature up to 5 minutes after the programme has started. Spin speed It is possible to change the spin speed up until the final spin begins. Extra options It is possible to select or deselect the Short and Water plus extra options up to 5 minutes after the programme has started. Please note that no changes are possible if the safety lock has been activated.
^ Press the right hand Menu button under OK. If you want to select a different programme: ^ Switch the machine off with the I-On/ 0-Off button. ^ Select and start a new programme.
33
Changing the programme sequence
Adding or removing laundry after a programme has started
^ Press the Door button to open the drum door. Please note: Once a programme has started the machine cannot recognise any adjustment to the load. For this reason, if laundry is added or removed after the start of a programme, the machine will always complete the programme cycle assuming a full load which can lead to an increase in the programme duration shown in the display. The door cannot be opened, if: the suds temperature is above 55°C. If you press the Door button when the above conditions are present, the following will appear in the display:
Ü Door locked
Safety lock
The safety lock prevents the machine from being opened or the programme cancelled during a wash programme. To activate the safety lock ^ Press and hold in the Start/Stop button after the programme has started.
Stopped:
Cancel programme Continue OK
By pressing the left hand Menu button under Continue, the following will appear in the display:
Activate safety lock
^ Confirm by pressing the right hand Menu button under OK. The following will appear in the display:
X Locked
The safety lock is now activated. [. . . ] A tick L will appear beside the option to show that it has been set.
Longer pre-wash
The pre-wash for the Cottons programme can be extended by 6, 9 or 12 minutes. A tick L will appear beside the option to show that it has been set.
65
Settings menu
Lock code
The code prevents your machine being used without your knowledge. When the code has been activated, you have to enter a code after switching the washing machine on. To activate the Lock code
Lock code
Activate Continue OK
Lock code
125 Back A OK
^ Confirm the code by pressing the right hand Menu button under OK or, if you have made a mistake, press the left hand Menu button under Back A. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE MIELE W 4446 WPS
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MIELE W 4446 WPS will begin.