User manual MOULINEX UK ATOLL

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual MOULINEX UK ATOLL. We hope that this MOULINEX UK ATOLL user guide will be useful to you.


MOULINEX UK ATOLL : Download the complete user guide (354 Ko)

Manual abstract: user guide MOULINEX UK ATOLL

Detailed instructions for use are in the User's Guide.

[. . . ] - Any intervention other than cleaning and 9 normal maintenance by the customer must be carried out by an approved Moulinex service centre. - Never place the appliance, the power cable or the plug in water or in any other liquid. - The power cable must never be allowed to come close to or in contact with the hot parts of your appliance, close to a source of heat or rest on sharp edges. [. . . ] Vertical crease removal (depending on model) You also have the option of using your iron in the vertical position to remove creases from your clothes on a hanger, curtains, etc. For models without the Perfectpoint system: - Set the temperature adjustment control (J) to «MAX» setting. - Hold the iron in the vertical position close to the fabric, without touching it. Push the pressing button (F) at the rate of not more than one pulse per second. For models with the Perfectpoint system: - Set the temperature adjustment control (J) to «MAX» setting. - Hold the iron in the vertical position close to the fabric, without touching it. Press the Perfectpoint button (G) at the rate of not more than one pulse per second. - The steam produced is not always visible, but still retains its ability to remove creases. Keep the iron far away enough from the fabric to avoid any risk of scorching. As the steam produced is very hot, never remove creases from a garment which is being worn by someone - it must always be on a hanger. "Aqua stop" (drip-stop system) (depending on model) This system controls the temperature of the soleplate at all times. Below a certain temperature, the "Aqua Stop" system cuts off the flow of water and stops the iron from dripping onto the laundry. Anticalc System (depending on model) This fixed system, located within the tank, reduces the problems linked with scale buildup. To prolong the effectiveness of this system, we advise that you perform the following operation approximately once every 30 uses: The iron is cold and unplugged. - Completely dissolve 1 tablespoon of salt (NaCl - cooking salt) in 1/2 litre of cold water. - Then fill the tank with fresh water to rinse and empty it. power cable by making a loop of about 10 cm starting from the iron. [. . . ] To prevent the soleplate of your iron coming into direct contact with the wool, place a dry cloth over the fabric to be ironed. to avoid making delicate fabrics shiny (silk, velvet, viscose, etc. ) or for fabrics with impressions (transfer, flocking, etc. ), iron on the reverse. As some marks may be fixed by a high temperature, it is preferable only to iron your laundry once all marks and stains have been completely removed. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE MOULINEX UK ATOLL




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual MOULINEX UK ATOLL will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.