User manual PALSONIC TFTV151

[. . . ] OWNER'S MANUAL TFTV-151 15. 1" TFT LCD Monitor TV Palsonic Corporation Pty Ltd 1 Joynton Avenue WATERLOO NSW 201 7 AUSTRALIA Tel 61 2 93137111 Fax 61 293137555 www. palsonic. com. au Customer Service - 1300 657 888 Contents Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Parts Description Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Find that the remote controller is no longer operating correctly. 1 Remove the cover of the remote controller by pressing the symbol and pulling the cover space in the direction of the arrow. 2 Insert 2 batteries (AAA size), Care about the polarities. 3 Replace the cover by pushing it in the direction of the arrow. !You can use your remote controller within a distance of 7~10m and an angle of 30 degrees from the left and right sides of the remote controller receptor of your monitor. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. 8 Menu Tree Main Menu PICTURE CONTRAST BRIGHTNESS SHARPNESS COLOR TEMP COLOR TINT SOUND TREBLE BASS BALANCE S. MODE MTS GEOMETRY (PC mode) H-POSITION V-POSITION AUTO POSITION FUNCTION (PC mode) TRACKING INFORMATION TUNING LANGUAGE FUNCTION (TV mode, PAL System) (TV/VIDEO mode) (PC mode) (TV/VIDEO mode) (TV/VIDEO mode, NTSC System) (PAL System) (NTSC System) AUTO TRACKING CLOCK (Not available) (PAL System) (Not available) PHASE TRACKING INFORMATION TUNING LANGUAGE SPORT AUTO TUNING MANUAL TUNING FINE TUNING CH SKIP (Not available) FUNCTION (TV mode, NTSC System) TRACKING INFORMATION TUNING AIR/CATV 9 Connecting a PC 1 2 Turn off your computer and monitor. Connect a PC D-Sub cable between your PC and PC-VIDEO-IN of the monitor. And then fasten the screws of both sides of the cable. 3 Connect a PC Audio Cable between the Sound Output jack of the sound card on a PC and the PC-AUDIO-IN of the monitor. 4 Connect a DC Power unit cable to the Power jack on the rear of your monitor. And connect a power cable to the DC Power unit before connecting to a power outlet. 5 Power on the computer before turning on the monitor. 10 Viewing a PC screen Initial set PC mode 1 2 Power on your monitor by pressing the POWER button on the main set or on the remote controller. Use the PC button on the remote controller to switch to the PC mode. (You can use an external speaker via the Audio Output jack on the rear of the main set. ) When the picture is unstable 1 2 3 Press the MENU button and the PICTURE menu is displayed. Use the VOL or VOL FUNCTION menu. button to move to the Use the CH or CH button to move to TRACKING, then press the SEL button. Then, the TRACKING menu will be displayed. 4 Move to AUTO TRACKING, then press the SELECT button. Then, the message "AUTO TRACKING PROCESSING . . . " appears on the screen to stabilise the screen. 5 Press the MENU button repeatedly until the menus disappear. 11 Viewing a PC screen Adjusting the Picture Settings Your monitor has several settings which allow you to control picture quality: CONTRAST, BRIGHTNESS, COLOUR TEMPERATURE 1 2 Press the MENU button. Result : The PICTURE menu is displayed. Use the CH or CH buttons to select one of the following options: CONTRAST BRIGHTNESS COLOUR TEMPERATURE 3 4 Press the SEL button. Press the VOL or VOL personal preference. buttons to suit your CONTRAST: Adjust the brightness and darkness between objects and back grounds. BRIGHTNESS: Adjust the overall of the screen brighter or darker COLOUR TEMPERATURE: The tone of colour can be changed from reddish white to bluish white. 5 Press the MENU button repeatedly until the menus disappear. 12 Viewing a PC screen Adjusting the Sound Settings The sound settings can be adjusted to suit your personal preference: TREBLE, BASS, BALANCE, S. MODE 1 2 Press the MENU button. Result: The PICTURE menu is displayed. Use the VOL or VOL SOUND menu. buttons to move the 3 Use the CH or CH following options: TREBLE BASS BALANCE S. MODE buttons to select one of the 4 5 Press the SEL button. Press the VOL or VOL personal preference. buttons to suit your S. MODE / MTS : To select STEREO or MONO 6 Press the MENU button repeatedly until the menus disappear. 13 Viewing a PC screen Adjusting the Geometry Settings The geometry settings can be adjusted to centre your viewing screen. 1 2 3 Press the MENU button. Result : The PICTURE menu is displayed. Use the VOL , VOL GEOMETRY menu. buttons to move the Use the CH or CH following options: H-POSITION V-POSITION AUTO POSITION buttons to select one of the 4 5 Press the SEL button. Press the VOL or VOL position of screen. buttons to adjust the If the position of screen is horizontally off-centred, use H-POSITION. Use the AUTO POSITION to position the screen to be horizontally and vertically centred automatically. 6 Press the MENU button repeatedly until the menus disappear. 14 Viewing a PC screen PC Stable Adjustment When the screen is unstable in PC settings, or to make your PC stable by adjusting the Clock and Phase, set the PC in the following sequence: 1 2 3 Press the MENU button. Result : The PICTURE menu is displayed. Use the VOL , VOL FUNCTION menu. buttons to move the Use the CH button move to TRACKING and then press the SEL button. Whenever this button is pressed, the mode will be changed as follows. CUSTOM STANDARD STRONG MOVIE SOFT CUSTOM Select this mode to view the adjusted picture you want. STANDARD Select this mode to view the factory - presetting standard picture. - to lessen the fatigue of eyes 18 Viewing a TV/VCR screen Adjusting the Sound Settings 1 The sound settings can be adjusted to suit your personal preference: TREBLE, BASS, BALANCE, S. MODE / MTS 1 2 3 Press the MENU button. Result: The PICTURE menu is displayed. Use the VOL , VOL SOUND menu. buttons to move the Use the CH or CH buttons to select one of the following options: TREBLE BASS BALANCE S. MODE (PAL System) MTS (NTSC System) 4 5 Press the SEL button. Press the VOL or VOL buttons to suit your personal preference. S. MODE : description below (PAL System) Type of broadcast Regular broadcast (Standard audio) Regular + NICAM Mono NICAM Stereo NICAM Dual-I/II Regular broadcast (Standard audio) A2 Stereo Bilingual or Dual-I/II On-screen lndlcation Mono (Normal use) Mono Nicam Stereo Nicam Dual-I Nicam Mono (Normal) Mono (Normal) Dual-II Mono Nicam (Normal) NICAM Stereo Mono (Normal use) Dual-I Stereo Dual-II Mono (Forced Mono) Stereo MTS: To select STEREO, SAP or MONO (NTSC System) 6 Press the MENU button repeatedly until the menus disappear. 19 Adjusting the Sound Settings 2 By pressing the S. STD button on the remote control, You may get more best sound and change the sound of a suit with a video source. CUSTOM STANDARD MUSIC MOVIE SPEECH CUSTOM Select this mode to listen the adjusted sound you want. STANDARD Select this mode to listen the factory - presetting standard sound. MUSIC Select this mode to listen the music video or the live picture source. SPEECH Select this mode to listen the TV news or the TV talk-shows, etc. 20 Channel Memory (PAL System) Storing the Channels Automatically You can scan the frequency ranges available on your television in your country and store all the channels found automatically. [. . . ] This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain period of time. The available modes are "On", "Stand-by", "Sleep" and "Deep Sleep". Power Saver operates with a VESA DPMS compliant video card installed in your computer You use a software utility installed on your computer to set up this feature. Power-Saving Function mode (EPA / ENERGY 2000) S:rate Normal Operation Standby Mode Sleep Mode Position A1 Deep Sleep Mode Position A2 Horizontal Sync Vertical Sync Video Active Active Active Inactive Active Blanked Active Inactive Blanked Inactive Inactive Blanked Power Indicator Power Consumption Green Amber Amber Blinking (0. 5 sec interval) Less than 3W Amber Blinking (1 sec interval) Less than 3W 30W (Max. ) Less than 3W NOTE: This monitor automatically returns to normal operation when horizontal and vertical sync return. [. . . ]