User manual PIONEER VSX-S520D

[. . . ] 68 E N > Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others What's in the box Before Start E N Main unit (1) Indoor FM antenna (1) (VSX-S520) Remote controller (RC-933R) (1), batteries (AAA/R03) (2) 0 Connect speakers with 4 Ω to 8 Ω impedance. 0 The power cord must be connected only after all other cable connections are completed. 0 We will not accept responsibility for damage arising from the connection of equipment manufactured by other companies. Furthermore, available services may vary depending on your area of residence. [. . . ] Set this item to "On" if noise is produced or truncation occurs at the beginning of a track when playing PCM sources. 0 The setting cannot be changed when "TUNER", "NET", "USB" or "BT AUDIO" input is selected. E N Hardware ∫ HDMI HDMI CEC Setting to "On" enables the input selection link and other link functions with HDMI connected CEC compliant device. "On": Use this function "Off (Default Value)": Do not use this function When changing this setting, turn off and then on again the power of all connected components. 0 Depending on the TV set, a link may need to be configured on the TV. 0 Setting to "On" and closing the on-screen menu displays the name of the CEC-compatible components and "CEC On" on the display of this unit. 0 Power consumption in standby mode may increase if "On" is set. (Depending on the TV status, the unit will enter the normal standby mode. ) 0 If you operate MASTER VOLUME dial on the unit when this setting is "On" and audio is output from the TV speakers, audio will be output also from the speakers connected to the unit. If you want to output from only either of them, change the unit or TV settings, or reduce the volume of the unit. 0 If abnormal operation occurs when you set the setting to "On", set it to "Off". 0 When connecting a non-CEC compatible component, or when you are not sure whether it is compatible, set the setting to "Off". Fixed PCM 47 > Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Firmware Update | Others HDMI Standby Through When this is set to anything other than "Off", you can play the video and audio of an HDMI connected player on the TV even if the unit is in standby mode. Only "Auto" and "Auto (Eco)" can be selected if "HDMI CEC" is set to "On". If you select anything else, set "HDMI CEC" to "Off". (Default Value is “Off”) 0 Power consumption in standby mode increases if set to anything other than "Off". "BD/DVD", "CBL/SAT", "GAME", "STRM BOX": For example, if you select "BD/DVD", you can play the equipment connected to the "BD/DVD" jack on the TV even if the unit is in standby mode. Select this setting if you have decided which player to use with this function. "Last": You can play the video and audio of the input selected immediately prior to the unit being switched to standby on the TV. "Auto", "Auto (Eco)": Select one of these settings when you have connected equipment that conforms to the CEC standard. You can play the video and audio of the input selected on the TV, irrespective of what input was selected immediately prior to the unit being switched to standby, using the CEC link function. 0 To play players on the TV that do not conform to the CEC standard, you will need to turn the unit on and switch to the relevant input. [. . . ] This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft. Windows and the Windows logo are trademarks of the Microsoft group of companies. DSD and the Direct Stream Digital logo are trademarks of Sony Corporation. [. . . ]