User manual PYRAMID PM1008

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PYRAMID PM1008. We hope that this PYRAMID PM1008 user guide will be useful to you.


PYRAMID PM1008 : Download the complete user guide (465 Ko)

Manual abstract: user guide PYRAMID PM1008

Detailed instructions for use are in the User's Guide.

[. . . ] Each frequency range can be cut or boost by up to 12dB. Features and Controls: PM 3008 Mixer Channel Input Selector Lets you choose the input source to play for each channel Channel CUE Switch Allows you to monitor the selected audio input source and prepare it prior to mixing it in. MIC 1 Combo Input Jack For connecting a balanced or unbalanced low impedance microphone with XLRtype or 1/4"plug MIC 2 Input Jack (on input panel) For connecting a balanced or unbalanced low impedance microphone with 1/4"plug Dual Display Meter Indicates the levels of Left and Right Master Channels Master Level Control Lets you control mixer's overall volume level Master Mono/Stereo Switch 7-Band Equalizer Allows you to tailor the mixer output to suit your taste or performance environment. Each frequency range can be cut or boost by up to 12dB. MIC 1 +12 LEFT CHANNEL +12 LEFT PWR -30 -25 -20 -14 -10 -5 0 +3 +6 RIGHT CHANNEL +12 +12 MIC 1 LAMP LEFT CHANNEL +12 +12 LEFT PWR -30 -25 -20 -14 -10 -5 0 +3 +6 RIGHT CHANNEL +12 +12 LAMP 0 0 RIGHT 0 0 BNC Lamp Adaptor Allows you to connect a 12V/3W lamp to light the panel POWER 0 0 RIGHT 0 0 BNC Lamp Adaptor Allows you to connect a 12V/3W lamp to light the panel POWER OFF ON TALKOVER -12 -12 PM 2008 STEREO SOUND MIXER/EFFECT LN 5 LN 6 LN 7 LN 8 -12 -12 OFF ON TALKOVER -12 -12 PM 3008 STEREO SOUND MIXER/SAMPLER LN 5 LN 6 LN 7 LN 8 -12 -12 60 150 400 1K 2. 4K 6K 15K 60 150 400 1K 2. 4K 6K 15K CUE PH 1/ LN 1 LN 2 PH 2/ LN 3 LN 4 EQ ECHO Power Switch CUE 60 150 400 1K 2. 4K 6K 15K 60 150 400 1K 2. 4K 6K 15K PH 1/ LN 1 LN 2 PH 2/ LN 3 LN 4 EQ Power Switch Equalizer On/Off Selector BOOTH SAMPLER CUE MIC 1 CUE CUE CUE OFF MONO ON OFF REPEAT ON BOOTH Equalizer On/Off Selector CUE MIC 1 CUE CUE CUE OFF MONO ON MODE SINGLE RECORD REPEAT CHANNEL 1 0 10 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 CHANNEL 2 CHANNEL 3 CHANNEL 4 MASTER 0 10 0 10 MIC 2 0 10 TREBLE 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 DELAY MIX Booth Level Control Lets you control the mixer's overall Booth volume level, if you set up remote speakers or DJ booth monitors Headphone CUE/PGM Control Allows you to listen simultaneously or separately to the CUE material or the active program Cue Level Control -Let you adjust the headphone's volume level Headphone Jack Accepts headphones with 1/4" plug CHANNEL 1 0 10 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 CHANNEL 2 CHANNEL 3 CHANNEL 4 MASTER 0 10 MIC 2 0 10 LEVEL CUE PGM 0 10 CUE 0 10 TREBLE 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 START/STOP Booth Level Control Lets you control the mixer's overall Booth volume level, if you set up remote speakers or DJ booth monitors Headphone CUE/PGM Control Allows you to listen simultaneously or separately to the CUE material or the active program Cue Level Control MIX CUE PGM CUE -12 +12 0 10 -12 +12 CROSS FADER BASS 0 2 1 3 4 SOUND EFFECT -10 2 1 3 4 LASER MACHINE GUN TRON 0 10 SPEED CUE 0 10 +10 CROSS FADER BASS 0 2 1 3 4 10 9 8 7 6 5 4 3 2 1 0 10 9 8 7 6 5 4 3 2 1 0 1 2 3 4 PITCH LEVEL -12 +12 ASSIGN A CH A 0 1 2 3 4 5 6 7 8 9 10 CH B ASSIGN B SIREN EMERGENCY UFO F/X PHONES -12 +12 ASSIGN A CH A 0 1 2 3 4 5 6 7 8 9 10 CH B ASSIGN B -10 +10 0 10 Headphone Jack Accepts headphones with 1/4" plug PHONES ECHO On/Off Switch MIC1/2 Tone Controls ECHO Repeat Control Lets you control the time period during which the echo is repeated ECHO Delay Control Lets you adjust the delay time for the echo ECHO Level Control Controls the depth of the echo effect Sound Effect Volume Control Lets you control the volume level of the sound effect within the mix Sound Effect Speed Control Lets you control the pitch of the selected sound effect Digital Sound Effects Selectors Lets you create special sound performance mixes from the six preprogrammed special effects Channel Assign Switch Lets you select the input source to be mixed by the Crossfade Slider Control Crossfade Slider Control Allows you to smoothly switch between the input sources assigned to Channel A and Channel B MIC1/2 Tone Controls MIC1/2 Level Controls Lets you control the MIC levels as they enter the mix MIC Talkover Allows you to lower the level of the input sources so you can talk them using the DJ Mic Sampler Start/Stop Controls the start and stop of the sampling process Sampler CUE Switch Allows you to monitor the desired sample signal Sampler Level Control Lets you adjust the volume of the desired sample signal as it enters the mix Sampler Pitch Control Lets you control the sampled signal's pitch Channel Assign Switch Lets you select the input source to be mixed by the Crossfade Slider Control Crossfade Slider Control Allows you to smoothly switch between the input sources assigned to Channel A and Channel B Sampler Mode Selector Selects the function of the sampler section MIC1/2 Level Controls Lets you control the MIC levels as they enter the mix MIC Talkover Allows you to lower the level of the input sources so you can talk them using the DJ Mic 2 ­ PYRAMID Mixer Owner's Manual PYRAMID Mixer Owner's Manual ­ 3 Presetting the Controls Before Use Set up the mixer controls like this before you start: Since sudden high output levels from your PYRAMID mixer can damage not only audio devices connected to the mixer output but your hearing as well (especially if you are using headphones), please adjust the mixer's controls BEFORE connecting AC power or turning on the unit. Connecting High Level Output Audio Sources Connect up to 8 such sources (tuner, cassette deck, CD Player, camcorder or VCR) to the input jacks for Line 1 (if not being used as Phono 1 input), Line 2, Line 3 (if not being used as Phono 2 input), Line 4, Line 5 and Line 6. [. . . ] (In this position, the MIC channel is mixed into the program like any other audio input source. ) Then adjust the corresponding MIC level controls to increase or decrease the microphone level (this will not affect the main volume inputs). When a microphone is not in use, set the MIC/TALKOVER switch to OFF. Monitoring ("Cueing") the Inputs 1. Set the CUE ASSIGN switch of the input source (MIC , CH1, CH2, CH3 or CH 4) you wish to monitor. The Headphone CUE/PGM control permits you to switch easily from listening to CUE material to the playing PROGRAM sound. You can also listen to both simultaneously by moving the Headphone CUE/PGM control to a point midway between the two ends. PM 3008: This model has an additional CUE on the sampler module for you monitor the sampled signal being applied. To monitor a sampled signal, press the SAMPLE ASSIGN button for the channel to which the sample has been saved, and then press the SAMPLE CUE button to audition this sound. Talkover Mode Talkover mode allows a voice to be heard clearly through the microphone by attenuating all the other audio input sources. This mode is engaged by setting the Talkover Switch to the TALKOVER position. Microphone Tone Controls Mixing the Inputs There are a maximum of ten input sources available at one time, including two microphone inputs. Both microphone input sources are always available as part of the mix, if desired. Each of the four audio channels can be linked to two different input sources, and one of these sources for each channel is available for mixing. Turn on all the available audio sources and be sure they are providing sound before continuing. Select the Channel Input Selectors for each channel, choose the audio sources you want to mix for each channel (i. e. , choose PHONO1/LINE1 or LINE2). Set the Mic and Channel Level controls all to within the 8 - 10 range. Slide the MASTER volume control toward 10 until you get an average reading of 0 on both Output Level LED Meters. The output level displayed in the meters represents the TOTAL output from all the channels supplying audio to the mix. If you add or change input sources, adjust the corresponding MIC1, 2 or CH1, CH2, CH3 or CH4 level control(s) to maintain the average reading of 0 on the LED meters. To change the overall sound level, adjust the RECEIVER/AMPLIFIER (NOT THE MIXER) volume control to the desired volume. These BASS and TREBLE controls, permit you to tailor the tone frequencies of the MIC inputs processed through the mix. [. . . ] Press and hold any button to generate a sound which is added to the mix. The SPEED control lets you raise or lower the pitch of the sound effect, and the VOLUME control allows you to increase or decrease the effect's volume level within the mix. Feedback is present Using the Digital Sampler Follow these steps to record a sample: 1. Play the audio source for recording as a sample. (PM 3008) The PM 3008 mixer contains a digital sampler circuit which can record samples to the internal recording IC. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PYRAMID PM1008




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PYRAMID PM1008 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.