User manual RICOH AFICIO 1035

[. . . ] 1035/1045 Operating Instructions Copy Reference Zdsh000j. eps Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual. RICOH COMPANY, LTD. 15-5, Minami Aoyama 1-chome, Minato-ku, Tokyo 107-8544, Japan Phone: +81-(0)3-3479-3111 1035/1045 Operating Instructions Overseas Affiliates U. S. A. RICOH CORPORATION 5 Dedrick Place West Caldwell, New Jersey 07006 Phone: +1-973-882-2000 The Netherlands RICOH EUROPE B. V. Groenelaan 3, 1186 AA, Amstelveen Phone: +31-(0)20-5474111 United Kingdom RICOH UK LTD. [. . . ] P. 80 "Specifying Orientation of Bound Originals". A Press the [Dup. /Combine/Series] key. C Press the [OK] key. } When setting an original on the exposure glass or in the document feeder using Batch mode Reference P. 31 "Batch mode". B Press the [2 Sided] key for original, then press the [2 Sided] key for copy. A Set the original, then press the {Start} key. } C Press the {#} key after the last } original has been scanned. Note To change the copy orientation to "Top to Bottom", press the [Orientation] key and select [Top to Bottom]. P. 80 "Specifying Orientation of Bound Originals". D Set your originals, then press the C Press the [OK] key. {Start} key. } 83 Copying When setting an original on the exposure glass or in the document feeder using Batch mode Reference P. 31 "Batch mode". 2 A Set the original, then press the {Start} key. } C Press the {#} key after the last } original has been scanned. 84 Combine Combine You can combine two or more originals into one copy. 1 Sided Combine mode is for 1-sided copies, and 2 Sided Combine mode for 2-sided copies. This function can be used in twelve ways: 2 Sided 4 Pages Combine 2 Side Copies two 2-sided originals together to both sides of a sheet. 2 Sided 8 Pages Combine 2 Side Copies four 2-sided originals together to both sides of a sheet. 2 Sided 16 Pages Combine 2 Side Copies eight 2-sided originals together to both sides of a sheet. Limitation You cannot use the bypass tray with this function. If the calculated ratio is under the minimum ratio, it is corrected within the range of the ratio automatically. Note In this mode, the machine selects the reproduction ratio automatically. This reproduction ratio depends on the copy paper sizes and the number of originals. The machine uses ratios in the following range: · Metric version: 25 ­ 400% · Inch version: 25 ­ 400% A separation line between originals can be printed with the User Tools. "Separation Line in Combine" in P. 218 "Edit 2/2". Even if the direction of originals is different from that of the copy paper, the machine will automatically rotate the image by 90° to make copies properly. 2 1 Sided 2 Pages Combine 1 Side Copies two 1-sided originals to one side of a sheet. 1 Sided 4 Pages Combine 1 Side Copies four 1-sided originals together to one side of a sheet. 1 Sided 8 Pages Combine 1 Side Copies eight 1-sided originals together to one side of a sheet. 1 Sided 4 Pages Combine 2 Side Copies four 1-sided originals to the two-page spread on both sides of a sheet. 1 Sided 8 Pages Combine 2 Side Copies eight 1-sided originals together to both sides of a sheet. 1 Sided 16 Pages Combine 2 Side Copies 16 1-sided originals together to both sides of a sheet. 2 Sided 2 Pages Combine 1 Side Copies one 2-sided original to one side of a sheet. [. . . ] Follow the procedure below to change unit. Important Be sure to unplug the power cord from the outlet before changing the photoconductor unit. B Push the development unit to the left, and then pull the photoconductor unit out. C Remove the harness clamps on the charge unit and cleaning unit of the new photoconductor unit. D Push the development unit to the left, and then install the new photoconductor unit. [. . . ]