User manual RICOH AFICIO 220,MV

[. . . ] 220/270 OPERATING INSTRUCTIONS COPY REFERENCE Read this manual carefully before you use this product and keep it handy for future reference. Com manuals search engine Introduction This manual contains detailed instructions on the operation and maintenance of this machine. To get maximum versatility from this machine all operators should carefully read and follow the instructions in this manual. it contains important information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS. [. . . ] 1: Horizontal original size 2: Vertical original size 3: Horizontal copy size 4: Vertical copy size Note Ì You can enter sizes within the following ranges: Metric version Inch version 1 – 999mm (in 1mm steps) 0. 1" steps) Note Ì To change the value entered, press the {Clear/Stop} key and enter the new value. D Enter the vertical size of the origi- Ì You can change the reproduction ratio from 25–400 %. Com manuals search engine Copying E Enter the vertical size of the copy with the Number keys. Com manuals search engine Directional Magnification (%)—Stretching and Squeezing the Image in 1% Steps Directional Magnification (%)—Stretching and Squeezing the Image in 1% Steps Copies can be reduced or enlarged at different reproduction ratios horizontally and vertically. 1: Horizontal % 2: Vertical % Note Ì You can change the reproduction ratio from 25–400 %. Ì When you set the originals in the document feeder, you can change the reproduction ratio from 50–200 %. Ì You can select a ratio regardless of the size of an original or copy paper. With some ratios, parts of the image might not be copied or blank margins will appear on copies. Com manuals search engine Copying Center/Border Erase—Erasing the Center and the Border This function erases the center and/ or all four sides of the original image, such as book originals. 4" 2 y Center Erase A B A B Ì The position of the margin to be erased is determined according to the copy paper size. L copy paper K copy paper CenterEE y Border Erase A B A B 1 BorderEE Two methods are available: Ì 1: Erased part Ì You can use the Center Erase and Border Erase functions together. Note Ì You can change the width of the erased margin as follows: Metric version 3 – 50mm (in 1mm steps) Inch version 0. Com manuals search engine Center/Border Erase—Erasing the Center and the Border Center A Press the [Center] key. C Set your originals, then press the B Enter the center width with the Number keys. 2 Note Ì To change the value entered, press the {Clear/Stop} key and enter the new value. Note Ì To change the value entered, press the {Clear/Stop} key and enter the new value. Com manuals search engine Copying Combine—Combining Originals into One Copy Use this feature to combine several original images onto one or more pages. ) 4 one-sided pages are copied onto 1 two-sided sheet, 2 original images on each side. Com manuals search engine Combine—Combining Originals into One Copy y 8 Orig. ) 8 one-sided pages are copied onto 1 two-sided sheet, 4 original images on each side. ) 16 one-sided pages are copied onto 1 two-sided sheet, 8 original images on each side. [. . . ] Com manuals search engine Remarks Maintaining Your Machine If the exposure glass, platen covers or document feeder white sheet is dirty, you might not be able to make copies as you want. Cleaning the Platen Cover y Cleaning the machine Wipe the machine with a soft, damp cloth. important Ì Do not use chemical cleaner or organic solvent such as thinner or benzene. If they get into the machine or melt plastic parts, a failure might occur. [. . . ]