User manual RICOH AFICIO MP 1500

[. . . ] Operating Instructions 1 2 3 4 5 6 7 8 9 Getting Started Placing Originals Copying User Tools Troubleshooting Other Functions Remarks Security Specifications Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Safety Information in this manual before using the machine. Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Important Contents of this manual are subject to change without prior notice. [. . . ] When placed in the ADF, the bottom left corner is the base point. C Select a ratio using {U} or {T}, and then press the {OK} key. The " Programmed " message appears. D Place Zoom your originals, and then press the {Start} key. You can change the reproduction ratio in increments of 1%. GCKA031e 1. Base point when placing in the ADF. Reference Related default settings Note You can also select a preset ratio close to the desired ratio using [Reduce] or [Enlarge], and then adjust the ratio using {U} or {T}. p. 43 "Reproduction Ratio" p. 43 "Preset R/E Priority" 29 Copying A Press [R/E]. To enter the ratio using the number keys A Enter the desired ratio using the number keys. The " Programmed " message appears. B Press [Zoom]. 3 C Enter the ratio. D Place Sort your originals, and then press the {Start} key. You can scan originals into memory and automatically sort copies. Sort Copies are assembled as sequentially ordered sets. To select the ratio using {U} and {T} A Adjust the ratio using {U} or {T}. Note If you have incorrectly entered the ratio, readjust using {U} or {T}. A Press the {Sort} key. To change the ratio in increments of 10%, press and hold down {U} or {T}. The " Programmed " message appears. Sort Lighter APH021S Note When canceling the Sort function, press the {Sort} key, and make sure the {Sort} key indicator is off. 30 Copier Functions B Enter the number of copy sets using the number keys. Changing the number of sets You can change the number of copy sets during copying. Note This function can only be used when the Sort function is selected. C Place your originals. Note When placing originals on the exposure glass, start from the first page to be copied. When placing originals in the ADF, set the first page on top. A While " Copying. . . " is displayed, press the {Clear/Stop} key. B Press [Sets]. 3 D Press the {Start} key. Note When placing originals on the exposure glass, press the {#} key after all originals are scanned. C Enter the number of copy sets with the number keys, and then press [Resume]. Copying starts again. Note The number of sets you can enter differs depending on when the {Clear/Stop} key is pressed. 31 Copying 3 32 4. User Tools User Tools Menu ( System Settings ) General Features (See p. 38 "General Features". ) Default Copy Count Display Display Contrast Key Repeat Measurement Unit Up Centre On Metric version: mm Inch verion: inch Tray Paper Settings (See p. 38 "Tray Paper Settings". ) Default Tray Paper Size: Tray 1 Metric version: 8 /2" × 11" L 1 Inch version: A4L Paper Type: Bypass tray Thick Paper Timer Settings (See p. 39 "Timer Settings". ) Default Auto Off Timer Energy Saver Timer System Auto Reset Timer Copier Auto Reset Timer 1 min. 60 sec. 33 User Tools Key Operator Tools (See p. 40 "Key Operator Tools". ) Default User Code Man. : Copier Key Counter Management Key Operator Code Display/Print Counter Counter per User Code Display Print Clear Program/Change User Code Program Change Delete AOF (Always On) Off Off Off -- -- -- -- -- -- -- On 4 34 User Tools Menu ( Copier Settings ) User Tools Menu ( Copier Settings ) Copier Features (See p. 42 "Copier Features". ) Default Original Type Setting Original Type 1 (Text): Text Mode 1 Original Type 2 (Photo): Photo Mode 1 Max. Number of Sets Original Count Display Reproduction Ratio 99 sheets Off Metric version: · Ratio 1: 50% · Ratio 2: 71% · Ratio 3: 82% · Ratio 4: 93% · Ratio 5: 122% · Ratio 6: 141% · Ratio 7: 200% Inch version: · Ratio 1: 50% · Ratio 2: 65% · Ratio 3: 78% · Ratio 4: 93% · Ratio 5: 121% · Ratio 6: 129% · Ratio 7: 155% Preset R/E Priority Metric version: 71% Inch version: 65% Letterhead Setting Off 4 35 User Tools Accessing User Tools This section is for key operators in charge of this machine. User Tools allow you to change or set defaults. Note Operations for system settings differ from normal operations. Any changes you make with User Tools remain in effect even if the main power switch or operation switch is turned off, or the {Clear Modes} key is pressed. B Select [System Settings] or [Copier Features] using {U} or {T}, and then press the {OK} key. 4 C Select the menu using {U} or {T}, and then press the {OK} key. Changing Default Settings Note If a key operator code is already set, the key operator code entry display appears. See p. 40 "Key Operator Code". Reference p. 33 "User Tools Menu ( System Settings )"p. 35 "User Tools Menu ( Copier Settings )". D Select the item using {U} or {T }, and then press the {OK} key. A Press the {User Tools/Counter} key. User Tools/Counter ClearModes E Change settings by following in- ABC DEF Clear/Stop structions on the display, and then press the {OK} key. Note To cancel changes made to settings and return to the initial display, press the {User Tools/Counter} key. JKL MNO Start TUV WXYZ APE044S 36 Accessing User Tools Quitting User Tools A Press the {User Tools/Counter} key. User Tools/Counter ClearModes ABC DEF Clear/Stop JKL MNO Start TUV WXYZ APE044S 4 37 User Tools Settings You Can Change with User Tools Reference To access User Tools, see p. 36 "Accessing User Tools". Tray Paper Settings Tray Paper Size: Tray 1 Select the size of the paper loaded in the paper tray. · The paper sizes you can set for Tray 1 are as follows: A3L, B4JIS (Japanese Industrial Standard)L, A4KL, B5JISKL, A5K, 11" × 17"L, 8 1 / 2 " × 14"L, 8 1 / 2 " × 13"L, 81/4" × 14"L, 81/4" × 13"L, 8" × 13"L, 81/2" × 11"KL, 71/4" × 10 1 / 2 "KL, 5 1 / 2 " × 8 1 / 2 "K, 8KL, 16KKL Important If the specified paper size differs from the actual size of the paper loaded in the paper tray, a misfeed might occur because the correct paper size was not detected. Note Default: · Metric version: 81/2" × 11"L · Inch version: A4L If the paper size set for the selector in the paper tray is different from the paper size for this setting, the paper size of the selector has priority. If you load paper of a size not indicated on the paper size selector in the paper tray, set the selector to "p". Reference p. 59 "Changing the Paper Size" System Settings General Features 4 Copy Count Display The copy counter can be set to show the number of copies made (count up), or the number of copies yet to be made (count down). Note Default: Up (count up) Display Contrast You can adjust the brightness of the display. Key Repeat You can select whether or not to use the key repeat function. Note Default: On Measurement Unit You can switch the measurement between "mm" and "inch". Note Default: · Metric version: mm · Inch version: inch 38 Settings You Can Change with User Tools Paper Type: Bypass tray Set the display so you can see what type of paper is loaded in the bypass tray. · The paper types you can set for the bypass tray are as follows: · recycled paper, special paper, colour paper, letterhead, prepunched paper, label paper, bond paper, thick paper, OHP, cardstock Note Default: Thick Paper Paper types you can set in the bypass tray for machines with the copy function only are plain paper, thick paper and OHP. Energy Saver Timer The machine automatically enters Low Power mode automatically after a job is finished, and the selected time elapsed. Note Default: 1 min. Energy Saver may not work when error messages appear. Timer Settings Auto Off Timer Afte r a spe cifi ed pe r iod ha s passed, following job completion, the machine automatically turns off, in order to conserve energy. The machine status after the Auto Off operation is referred to as "Off mode". For the Auto Off Timer, specify the time to elapse before Auto Off. Note Default: 1 min. [. . . ] It is not to protect confidential documents from others. 8 70 9. Specifications Main Unit Configuration: Desktop Photosensitivity type: OPC drum Original scanning: One-dimensional solid scanning system through CCD Copy process: Dry electrostatic transfer system Development: Dry two-component magnetic brush development system Fusing: Heating roll pressure system Resolution: 600 dpi Exposure glass: Stationary original exposure type Original reference position: Rear left corner Warm-up time: From the main power switch 15 seconds or less (20 °C) From the operation switch 10 seconds or less (20 °C) Originals: Sheet/book/objects Maximum original size: A3L, 11" × 17"L 71 Specifications Copy paper size: · Tray: A3L ­ A5K, 11" × 17"L ­ 51/2" × 81/2"K · Bypass: A3L ­ A6L, 11" × 17"L ­ 51/2" × 81/2"L · Bypass (custom size): Vertical: 90 ­ 297 mm, 3. 55" ­ 11. 69" Horizontal: 148 ­ 600 mm, 5. 83" ­ 23. 62" Copy paper weight: · Paper tray (Standard size): 60 ­ 90 g/m2, 16 ­ 24 lb · Bypass tray: 52 ­ 162 g/m2, 14 ­ 43 lb Non-reproduction area: · Leading edge: 2 ± 1. 5 mm (0. 08 ± 0. 06 inch) · Trailing edge: more than 0. 5 mm (0. 02 inch) · Left edge: 2 ± 1. 5 mm (0. 08 ± 0. 06 inch) · Right edge: more than 0. 5 mm (0. 02 inch) First copy time: 6. 5 seconds or less (A4K, 81/2" × 11"K 100%, feeding from Tray 1) Copying speed: 15 copies/minute (A4K, 81/2" × 11"K) Reproduction ratio: Preset reproduction ratios: -- Metric version 200% 141% 122% Full Size Reduction 100% 93% 82% 71% 50% Inch version 155% 129% 121% 100% 93% 78% 65% 50% Enlargement 9 Zoom: From 50% to 200% in 1% steps. Continuous copying count: 1 ­ 99 copies Copy paper capacity: · Tray 1: 250 sheets (80 g/m2, 20 lb) · Bypass: 100 sheets (80 g/m2, 20 lb) 72 Main Unit Power consumption: Warm up Stand-by During printing Maximum Less than 1, 280 W About 110 W About 440 W Less than 1, 280 W Dimensions (W × D × H up to exposure glass): 550 × 568 × 420mm, 21. 65" × 22. 36" × 16. 54" Noise Emission *1 : · Sound power level Stand-by During printing 40 dB (A) 59 dB (A) · Sound pressure level *2 Stand-by During printing *1 *2 26 dB (A) 46 dB (A) The above measurements made in accordance with ISO 7779 are actual values. Measured at the position of the operator. Weight: 35 kg (78 lb) or less Note Specifications are subject to change without notice. 9 73 Specifications Options Exposure Glass Cover Lower this over originals. Auto Document Feeder (ADF) Mode: ADF mode Original size: · A3L ­ A5KL · 11" × 17"L ­ 51/2" × 81/2"KL Original weight: One-sided originals: 52 ­ 105 g/m2 (14 ­ 28 lb) Number of originals to be set: 30 sheets (80 g/m2, 20 lb) Maximum power consumption: less than 25 W (power is supplied from the main unit. ) Dimensions (W × D × H): 550 × 470 × 90 mm, 21. 7" × 18. 6" × 3. 6" 9 Weight: 7 kg (15 lb) or less Note Specifications are subject to change without notice. 74 Combination Chart Combination Chart The combination chart below shows which functions can be used together. When you read the chart, see the following table: $ These functions can be used together. [. . . ]