User manual RICOH AFICIOMP C2051

[. . . ] In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine. Trademarks Microsoft®, Windows® and Windows NT® are registered trademarks of Microsoft Corporation in the United States and/or other countries. Adobe® and PostScript® are registered trademarks of Adobe Systems Incorporated. Apple, AppleTalk, EtherTalk, Macintosh, Mac OS and TrueType are trademarks of Apple Computer, Inc, registered in the U. S. [. . . ] D Click [OK] to start printing. Note The procedure to open the printer properties dialog box may vary depending on the application. With some applications, the printer driver settings are not used, and the application's own default settings are applied. Any settings you make in the following procedure are valid for the current application only. General users can change the properties displayed in the [Print] dialog box of an application. Settings made here are used as defaults when printing from this application. Reference For details, see the printer driver Help. 53 Windows Configuration 1 54 2. Mac OS Configuration Mac OS This section explains how to configure a Mac OS to use EtherTalk and USB. If you are not using Mac OS 9. 1, see the manual of the Mac OS you are using for details Important For Mac OS 8. 6 and higher. (Mac OS X Classic environment is supported. ) Note The PostScript 3 printer driver is stored in the following folder on the CD-ROM. Mac OS 8 and 9:PS Driver:(language):Disk1 Installing the PostScript 3 Printer Driver and PPD File It is necessary to install a printer driver and PostScript Printer Description (PPD) files to print from a Mac OS. Follow the procedure below to install a printer driver and a PPD file into a Mac OS using Mac OS 8. 6 and higher. PostScript 3 Printer Driver A Insert the CD-ROM into the CD-ROM drive. If the zone is set, click [More Printers. . . ], and then select the zone from the second pop-up menu. 59 Mac OS Configuration C Select the printer, and then select its manufacturer from the [Printer Model:] pop-up menu. Under Mac OS X 10. 4 or later, you are using from the [Print Using] popup menu. A list of printer types appears. 2 D Select the PPD file for the model you are using, and then click [Add]. E Quit Printer Setup Utility. Setting Up Options A Start System Preferences. C In the [Printer] list, click the name of the printer you want to use, and then click [Printer Setup. . . ]. for it. D Select the option you want to set up, and then select an appropriate setting E Click [Apply Changes]. Note If the option you want to select is not displayed, PPD files may not be set up correctly. To complete the setup, check the name of the PPD file displayed in the dialog box. Using USB Interface Follow the procedure below to set up USB connection. A Start Printer Setup Utility. B Click [Add]. Mac OS X 10. 4 or later Click a printer that has "USB" indicated in the "Connection" column. The connected printer appears. C Select the printer, and then select its manufacturer from the [Printer Model:] pop-up menu. Under Mac OS X 10. 4 or later, you are using from the [Print Using] pop-up menu. [. . . ] Before initializing, be sure to check the data on the hard disk drive. Do not turn off the power switch until initializing is completed, otherwise the hard disk drive might be damaged. A Select [Initialize Printer's Disk. . . ] on the [File] menu. The confirmation message appears. To cancel initialization, click [Cancel]. B Click [Execute]. Initializing starts. C When the completion message appears, click [OK]. 111 Printer Utility for Mac Page Setup You can set the paper size on which to print "Print Fonts Catalogue" and "Prints Fonts Sample". A Select [Page Setup. . . ] on the [File] menu. B Choose the paper size. Printing Fonts Catalog Print the names of fonts available on the printer. 4 A Select [Print Fonts Catalogue] on the [File] menu. [. . . ]