User manual RICOH AFICIO1013F

[. . . ] RICOH COMPANY, LTD. 15-5, Minami Aoyama 1-chome, Minato-ku, Tokyo 107-8544, Japan Phone: +81-(0)3-3479-3111 1013/1013F Operating Instructions 1013/1013F Operating Instructions Copy Reference Copy Reference Overseas Affiliates U. S. A. RICOH CORPORATION 5 Dedrick Place West Caldwell, New Jersey 07006 Phone: +1-973-882-2000 The Netherlands RICOH EUROPE B. V. Groenelaan 3, 1186 AA, Amstelveen Phone: +31-(0)20-5474111 United Kingdom RICOH UK LTD. Ricoh House, 1 Plane Tree Crescent, Feltham, Middlesex, TW13 7HG Phone: +44-(0)20-8261-4000 Germany RICOH DEUTSCHLAND GmbH Mergenthalerallee 38-40, 65760 Eschborn Phone: +49-(0)6196-9060 France RICOH FRANCE S. A. [. . . ] } D Place your originals. Reference See p. 19 "Placing Originals". -System Reset The machine returns to its prioritized mode automatically after your job is finished, after a certain period of time. This function is called "System Reset". Note You can change the System Reset time. System Reset" in the System Settings manual. E Make the desired settings. F Enter the number of copies re- quired with the number keys. 17 Copying - Auto Off The machine turns itself off automatically after your job is finished, after a certain period of time. This function is called "Auto Off". 2 Note How to exit Auto Off mode: · Turn on the operation switch · Place an original in the document feeder (ADF) · Lift and lower the exposure glass cover You can change the Auto Off time. Auto Off Timer" in the System Settings manual. 18 Placing Originals Placing Originals Limitation Place originals after correction fluid and ink has completely dried. Not taking this precaution could mark the exposure glass and cause marks to be copied. Note Basically, the originals should be aligned to the rear left corner. However, some copy functions may produce different results depending on the direction of the originals. For details, see explanations of each function. Originals Document feeder (ADF) Exposure glass Placing Originals on the Exposure Glass A Lift the exposure glass cover or the document feeder (ADF). The original should be aligned to the rear left corner. 2 B Place the original face down on 1. Scale C Lower the exposure glass cover or the document feeder (ADF). Reference See p. 10 "Originals". 19 Copying Loading Originals in the Document Feeder (ADF) Note The original might become dirty if it is written with a pencil or similar tools. Do not place any foreign objects on the document feeder (ADF) or cover it with your hand. 2 Note Do not stack originals above the limit mark. To avoid a multi-sheet feed, shuffle the originals before setting them in the document feeder (ADF). Placing Standard Size Originals Note When the copy paper size and the original size differ, follow the steps below. } A Press the {Menu} key. Reference Regarding originals that the document feeder (ADF) can handle, see p. 10 "Originals". A Adjust the guide to the original size. B Place the aligned originals face up into the document feeder (ADF). B Press the 0 or 1 key to select "3. Original Size", and then press the {OK} key. } When the bypass tray is selected, the {R/#} key does not work } to enter this mode. 1. Document guide 20 Placing Originals C Make sure that "Standard Size" is selected, and then press the {OK} } key. Placing Custom Size Originals Limitation Enter the size of your original if it is not one of the following: A4L, A5KL, 8 1 / 2 " × 14"L, 8 1 / 2 " × 13"L, 8 1 / 2 " × 11"L, 5 1 / 2 " × 81/2"KL, 8" × 13"L, 81/4" × 13"L, 81/4" × 14"L For exposure glass, the paper size that can be set with this function is vertical 105­216mm, 4. 1"­8. 5", horizontal 128­297mm, 5"­11" For document feeder (ADF), the paper size that can be set with this function is vertical 140­216mm, 5. 5"­8. 5", horizontal 140­356mm, 5. 5"­14". For exposure glass, the maximum copy paper size is 210 × 297mm, 81/2" × 11". For document feeder (ADF), the maximum copy paper size is 216 × 356mm, 81/2" × 14". Note If not, press the 0 or 1 key to select it. 2 D Press the 0 or 1 key to select original size, and then press the {OK} key. } E Press the {Select Paper Tray} key to } select your desired tray. A Place one original face down on B Press the {Menu} key. } Note Select the same size and direction copy paper as the original. the exposure glass or face up into the document feeder (ADF). F Press the {Start} key. } 21 Copying C Press the 0 or 1 key to select "3. Original Size", and then press the {OK} key. } 2 Note You can also enter this mode by pressing the {R/#} key. [. . . ] If the paper tray unit becomes detached from the main unit, this could cause an injury. R CAUTION: · If you use the equipment in a confined space, make sure there is a continuous air turnover. · · · · · Temperature: 10 ­ 32°C (50 ­ 89. 6°F), humidity 54% at 32°C, 89. 6°F Humidity: 15 ­ 80%, temperature 27°C, 80. 6°F at 80% A strong and level base. The machine must be level within 5mm, 0. 2" both front to rear and left to right. To avoid possible build-up of ozone, be sure to locate this machine in a large well ventilated room that has an air turnover of more than 30 m3/hr/person. Environments to avoid · Locations exposed to direct sunlight or strong light (more than 1, 500 lux). · Locations directly exposed to cool air from an air conditioner or heated air from a heater. [. . . ]