Detailed instructions for use are in the User's Guide.
[. . . ] Operation Manual
Using These Manuals
The two manuals attached are for your Caplio RR30. Please read this first: Quick Start guide (printed manual) This booklet is designed to help you enjoy your Caplio RR30 right away by providing quick explanations: "Getting Ready to Shoot", "Shooting Images", "Viewing Images", and "Connecting to Your PC. "
Before using your camera, first read this manual.
Please read as needed: Operation Manual (this manual). This explains how to use all the functions of your Caplio RR30.
To get the most out of your Caplio RR30, please read it through once. Also, refer to it whenever necessary.
Meaning of Symbols
The following symbols are used in this guide: Important This indicates important information and restrictions. [. . . ] However, when formatting is executed, it makes no difference whether files are protected or not: all are deleted.
Protecting the Displayed Still Image
To protect a still image (or movie), follow the steps below.
Buttons used here
Display the still image (or movie) you want to protect. Press the button.
The Playback menu is displayed.
Press button to select [PROTECT] and then press the button.
Press the Turn the Mode Dial to (Playback Mode).
button to select [1 FILE].
The last still image taken is displayed.
85
Chapter 1 / Section 5 Deleting Still Images and Movies
Press the
button.
When set to Protect, the Protect symbol appears in the upper left of the screen.
The procedure for releasing protection from one file at a time is the same as that for setting protection.
· For how to display still images (or movies), see p. 71. · To remove protection of all still images (or movies) at once, see p. 87. · To remove protection of selections made on the Thumbnail Display screen, see p. 88.
86
Chapter 1 / Section 5 Deleting Still Images and Movies
Protecting All Still Images
To protect all your still images (or movies), follow the steps below.
Buttons used here
Press the
button to select [ALL FILES].
Confirm you are choosing [SELECT] and then press .
When set to Protect, the Protect symbol appears in the upper left of the screen.
Turn the Mode Dial to Press the button.
(Playback Mode).
The Playback menu is displayed.
Press the button to select [PROTECT] and then press the button.
· To remove protection from all your still images (or movies), select [RELEASE] in step · You can remove protection from all or multiple images (or movies) at once. · To remove protection for one still image at a time, see p. 85. · To remove protection of selections made on the Thumbnail Display screen, see p. 88.
.
87
Chapter 1 / Section 5 Deleting Still Images and Movies
Protecting Multiple Still Images or Movies at Once
To protect selected still images or movies all at once, follow the steps below.
Buttons used here
Press the button to select [PROTECT] and then press the button.
The Protect symbol appears in the upper left of the first still image (or movie).
Press the buttons to select the still image or movie you wish to Protect and press the button.
The Protect symbol appears in the upper left of the still image (or movie).
Turn the Mode Dial to Press the
(Playback Mode).
(Thumbnail Display) button.
The screen is split into six sections. Still images and movies (the first frame) are displayed in a reduced size.
Press the buttons to select the still image or movie you want to display. Press the button.
Repeat Step to select all the still images or movies you wish to protect.
If you selected an image by mistake, you can deselect by selecting the image and pressing the again. button
The Playback menu appears.
Press the
button.
To remove protection from multiple still images (or movies), following the steps described above, select the still images or movies you wish to release and implement. · To remove protection for one still image at a time, see p. 85. · To remove all protection at once, see p. 87.
88
Chapter 1 / Section 5 Deleting Still Images and Movies
Copying the Contents of Internal Memory to a Memory Card (COPY TO CARD)
You can copy all the movie and still image data stored in internal memory onto an SD Memory Card at once. To copy still images and movies from internal memory to SD Memory Card, follow the steps below.
Buttons used here
Turn the camera on. (Playback Mode).
The Playback menu appears.
Press the CARD].
button to select [COPY TO
Turn your camera off by pressing the power button. Insert the SD Memory Card.
Press the
button.
The display indicates copying is in process; once finished, you return to the playback screen.
· If the capacity of the SD Memory Card you are copying to is insufficient, a message will be displayed indicating there is not enough capacity. To copy only the number of shots that will fit into the available capacity, select [YES] and then press the [OK] button. · It is not possible to copy from SD Memory Card to internal memory.
89
Chapter 1 / Section 5 Deleting Still Images and Movies
Using a Printing Service (PRINT)
The still images recorded on SD Memory Card can be printed out if you take them to a shop that offers a digital camera print service. To use a print service, it is necessary to make settings required for printing. There are 3 methods of making DPOF settings: · Set one shot at a time · Set for All Still Images · Select multiple shots and set together
Setting DPOF for the Still Image Displayed
To make DPOF settings for one still image, follow the steps below.
Buttons used here
Press the
button to select [1 FILE].
Press the
button.
Once the DPOF setting is made, the DPOF symbol appears in the upper left of the screen.
Turn the Mode Dial to
(Playback Mode).
Display the still image you want to specify. Press the button.
· Removing the DPOF setting for one photo at a time is done in the same way as setting it. · You can specify one print per still image with this function. · For how to release all DPOF settings at once, see p. 91.
The Playback menu is displayed.
Press button to select [PRINT] and then press the button.
90
Chapter 1 / Section 5 Deleting Still Images and Movies
Setting DPOF for All Still Images
To make DPOF settings for all your still images, follow the steps below.
Buttons used here
Press the
button to select [ALL FILES].
Confirm you are choosing [SELECT] and then press .
Once the DPOF setting is made, the DPOF symbol appears in the upper left of the screen.
Turn the Mode Dial to Press the button.
(Playback Mode).
The Playback menu appears.
Press the
button to select [PRINT] and press button.
· To remove the DPOF setting from all your still images, select [RELEASE] in step · You can remove all or multiple still image DPOF settings at once.
.
· To remove the DPOF setting for 1 still image at a time, see p. 90. · To remove the DPOF settings of selections made on the Thumbnail Display screen, see p. 92.
91
Chapter 1 / Section 5 Deleting Still Images and Movies
Setting DPOF for Multiple Still Images
To make the DPOF setting for selected still images all at once, follow the steps below.
Buttons used here
Press the
button.
The Playback menu appears.
Press the button to select [PRINT] and then press the button.
The DPOF symbol appears in the upper left of the first still image.
Press the buttons to select the next still image you wish to set to DPOF, and then press the button.
The DPOF symbol appears in the upper left of the still image.
Turn the Mode Dial to Press the
(Playback Mode).
(Thumbnail Display) button.
The screen is split into 6 sections with the still images displayed at a reduced size.
Repeat Step to select all the still images for which you wish to make the DPOF setting.
If you selected an image by mistake, you can deselect it by selecting the image and pressing the button again.
Press the buttons to select the first still image for which you wish to make the DPOF setting.
Press the
button.
The display returns to the Thumbnail Display screen.
92
Section 6 Changing Camera Settings
This section explains how to make changes to the camera's settings.
In this section, still images and movies will both be referred to as "Images".
Chapter 1 / Section 6 Changing Camera Settings
Getting the SD Memory Card Ready for Use (CARD FORMAT)
If an error message "This card cannot be used. " is displayed, or if you have formatted a card with a computer or some other device, it is necessary to format the SD Memory Card prior to use.
For how to format internal memory, see p. 95.
To format, follow the steps below.
Buttons used here
Press the press the
button to select [YES] and then button.
Turn the Mode Dial to
The Setup Screen appears.
(Setup Mode).
Formatting commences. [. . . ] Please note that if the camera is seriously damaged by flooding, submergence, infiltration of sand or mud, violent shocks or dropping, it may not be repairable, and restoration to its original condition may be impossible. · Before sending the camera in for repair, check the battery and read the instruction manual again to ensure proper operation. · Some repairs require a significant amount of time to be completed. · When sending the camera to a service center, please include a note which describes the defective part and the problem as precisely as possible. [. . . ]