User manual RICOH DX 3340

[. . . ] Operating Instructions 1 2 3 4 5 6 7 Before Using the Machine Basics Printing Functions Troubleshooting User Tools Remarks Specifications Read this manual carefully before you use this machine and keep it handy for future reference. For safe and correct use, be sure to read the Safety Information before using the machine. Introduction This manual contains detailed instructions and notes on the operation and use of this machine. For your safety and benefit, read this manual carefully before using the machine. Important Contents of this manual are subject to change without prior notice. [. . . ] The default is 5 mm, 0. 2". A Set your original. 43 Printing Functions B Press the {Erase Border} key. Economy Mode Use this function to save ink. Note Prints will appear lighter when Economy mode is used. To select either "On" or "Off" for Economy mode, see "Economy Mode" on p. 106 "4 Initial Settings". 3 ANT145S C Use the {U}{T}keys to select the original size and orientation, and then press the {OK} key. A Set your original. B Press the {Economy Mode} key. D Enter the number of prints with the number keys. ANT142S C Enter the number of prints with the number keys. ANT122S E Press the {Start} key. ANT122S ANT128S 44 Printing Functions D Press the {Start} key. Memory Mode (print per original) You can choose from the following two types of Memory mode: · Normal Memory Mode Use to make prints from a number of different originals. A different number of prints is made from each original. ANT128S Memory/Class The Memory/Class function is useful especially for people such as teachers, who often have to make different numbers of prints from the same original for different classes or have to make the same number of prints from a number of different originals for the same class. Under the Memory/Class function, the following modes are available: A B C D A C B D GRCLAS1E 3 · Stack Memory Mode Use to make prints from one original, with a different number of prints for each class. Class Mode (print per class) Use to make prints from one original for multiple classes, with the same number of prints for each class. A AA AA STKMEM1E R R R R R R R GRCLAS0E Note You can specify either Normal Memory Mode or Stack Memory Mode as the default. See "Memory Mode Setting" on p. 107 "5 Mode Settings". 45 Printing Functions Recall Program Use to recall settings that you have stored under the Memory Mode and Class Mode. Class/Year Mode Reference If the use of this machine is not limited to school or college, you can choose to have this mode displayed as "Department" displayed instead of "Class/Year". See "Class Display" on p. 105 "3 Set Operation Mode". Class Mode (print per class) Note You can print for up to 24 combinations of number of prints and number of classes. The maximum possible number of classes in one combination is 99. 3 A Set your original. B Press the {Memory/Class} key. ANT139S GRCLAS2E · All Use to make prints from the same original for all the registered classes in all the school years. · Class Select to make prints from the same original for only the classes selected. · Households Use to make prints from the same original for all the registered student households in the school. C Use the {U}{T} keys to select Class and then press {OK} key. D With the number keys, enter the desired number of prints, and the press the {q} key. 46 Printing Functions E With the number keys, enter the desired number of classes, and then press the {q} key. Memory Mode (print per original) Normal Memory Mode Note You can make prints from up to 30 originals at one time. F Press the {OK} key. G If you are using the optional tape Note Repeat Steps D to E as desired. A Set your original. B Press the {Memory/Class} key. 3 dispenser, turn on the tape dispenser switch. ANT139S On C Use Off TSLP013E the {U}{T} keys to select Memory, and then press the {OK} key. Note The optional tape dispenser automatically feeds out strips of paper to separate each group of prints. H Press the {Start} key. D With the number keys, enter the desired number of prints for each original, and then press the {q} key. ANT128S Note Repeat this step until you have entered for all the originals. E Press the {OK} key. 47 Printing Functions F If you are using the optional tape dispenser, turn on the tape dispenser switch. B Press the {Memory/Class} key. 3 On Off TSLP013E ANT139S C Use Note The optional tape dispenser automatically feeds out strips of paper to separate the prints made from each original. the {U}{T} keys to select Memory, and then press the {OK} key. G Press the {Start} key. D With the number keys, enter the desired number of prints for each class, and then press the {q} key. ANT128S Stack Memory Mode Limitation To use Stack Memory mode, you need to first set Memory Mode to "Stack Mode" using the user tools. See "Memory Mode Setting" on p. 107 "5 Mode Settings". Note You can make prints for up to 30 classes at one time. Note Repeat this step until you have entered for all your classes. E Press the {OK} key. F If you are using the optional tape dispenser, turn on the tape dispenser switch. A Set your original. 48 Printing Functions G Press the {Start} key. B Use the {U}{T} keys to select 4 Initial Settings, and then press the {OK} key. ANT128S C Use the {U}{T} keys to select 7 Program/Change Memory, and then press the {OK} key. 3 Recall Program Note You can store up to 10 entries for Memory mode with each entry containing settings for up to 30 originals (Normal Memory mode), or settings for up to 30 classes (Stack Memory mode). You can store up to 10 entries for Class mode with each entry containing settings for up to 24 combinations of classes and numbers of prints. D Use the {U}{T} keys to select a number, and then press the {OK} key. Storing Normal Memory Mode Settings A Press the {User Tools} key. Note If the number is already in use, a message will be displayed asking if you wish to overwrite the settings stored. Otherwise press the {Escape} key to return to the previous display, and then select another number. ANT140S 49 Printing Functions E With the number keys, enter the number of prints for each original, and then press the {q} key. B Use the {U}{T}keys to select 4 Initial Settings, and then press the {OK} key. 3 Note Repeat Steps D and E to register all your originals. C Use the {U}{T} keys to select 7 Program/Change memory, and then press the {OK} key. F Press the {OK} key. The contents that you have stored are now effective. D Use the {U}{T} keys to select a Storing Stack Memory Mode Settings Limitation To use Stack Memory mode, you need to first set Memory Mode to "Stack" using the user tools. See "Memory Mode Setting" on p. 107 "5 Mode Settings". number, and then press the {OK} key. A Press the {User Tools} key. Note If the number is already in use, a message will be displayed asking if you wish to overwrite the settings stored. [. . . ] Otherwise the machine might move or come down to cause an injury. 6 · Temperature: 10 ­ 30°C, 50 ­ 86°F · Humidity: · Main Frame: 20 ­ 90%RH · Auto Document Feeder (option): 20 ­ 70%RH · A strong and level base (a sturdy desk and cabinet etc. ). · The machine must be level within 5 mm, 0. 2" both front to rear and left to right. · Make sure to locate this machine in a large well ventilated room that has an air turnover of more than 30 m3/hr/person. Environments to avoid · Locations exposed to direct sunlight or strong light (more than 1500 lux). · Locations directly exposed to cool air from an air conditioner or heated air from a heater. [. . . ]