User manual RICOH PRIPORT DD 4450

[. . . ] In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine. Do not copy or print any item for which reproduction is prohibited by law. Copying or printing the following items is generally prohibited by local law: bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses. If you have any questions concerning the legality of copying or printing certain items, consult with your legal advisor. [. . . ] G Press the {Clear Modes/Energy SavBQZ008S B Use the {~}{}} keys to select 3 Initial Setting, and then press the {OK} key. er} key. The contents that you have registered are now effective. C Use the {~}{}} keys to select 9 Prog/Chng:Clss/Yr, and then press the {OK} key. 46 Select Class/Year Printing for All Years A Press the {Memory/Class} key. Note If you wish to check the image before printing, press the {Auto Cycle} key before pressing the {Master Making} key, in order to disable Auto Cycle mode. See p. 18 "When Auto Cycle mode is off". 1 Printing for Selected Classes A Press the {Memory/Class} key. ZLKS052E B Use the {~}{}} keys to select Select Class/Year, and then press the {OK} key. C Use the {~}{}} keys to select All, and then press the {OK} key. ZLKS052E B Use the {~}{}} keys to select Se- lect Class/Year, and then press the {OK} key. D Set your original. E Press the {Master Making} key. C Use the {~}{}} keys to select the school year, and then press the {OK} key. ZLKS030E Printing starts automatically after the trial print. 47 Operation D Use the {~}{}} keys to select the class that you wish to print for, and then press the {q} key. 1 Note Repeat Step D to select more classes. You can only select classes from the same school year. If you have selected the wrong class, indicate it again using the {~}{}} keys, and then press the {q} key to cancel its selection. E Press the {OK} key. G Press the {Master Making} key. ZLKS030E Printing starts automatically after the trial print. Note If you wish to check the image before printing, press the {Auto Cycle} key before pressing the {Master Making} key, in order to disable Auto Cycle mode. See p. 18 "When Auto Cycle mode is off". 48 Memory Mode Memory Mode Normal Memory Mode Note You can make prints from up to 30 originals at one time. E If you are using the optional tape dispenser, turn on the tape dispenser switch. 1 A Press the {Memory/Class} key. On Off TSLP013E ZLKS052E B Use Note The optional tape dispenser automatically feeds out strips of paper to separate the prints made from each original. the {~}{}} keys to select Memory, and the press the {OK} key. F Set your original. Note Set the originals in the same order as you have registered them in Step C. C With the number keys, enter the desired number of prints for each original, and then press the {q} key. Note Repeat this step until you have entered for all the originals. D Press the {OK} key. 49 Operation G Press the {Master Making} key. Stack Memory Mode Limitation To use Stack Memory mode, you need to first set Memory Mode to "Stack" using the user tools. Note You can make prints for up to 30 classes at one time. 1 ZLKS030E Printing starts automatically after the trial print. Note If you wish to check the image before printing, press the {Auto Cycle} key before pressing the {Master Making} key, in order to disable Auto Cycle mode. Reference For details on how to use the optional document feeder when printing in Memory mode, see p. 71 "Using the Document Feeder in Normal Memory Mode". A Press the {Memory/Class} key. ZLKS052E B Use the {~}{}} keys to select Memory, and then press the {OK} key. C With the number keys, enter the desired number of prints for each class, and then press the {q} key. Note Repeat this step until you have entered for all your classes. 50 Memory Mode D Press the {OK} key. G Press the {Master Making} key. dispenser, turn on the tape dispenser switch. 1 ZLKS030E Printing starts automatically after the trial print. Note If you wish to check the image before printing, press the {Auto Cycle} key before pressing the {Master Making} key, in order to disable Auto Cycle mode. Reference For details on how to use the optional document feeder when printing in Stack Memory mode, see p. 73 "Using the Document Feeder in Stack Memory Mode". 51 Operation Class Mode 1 Note You can print for up to 24 combinations of number of prints and number of classes. D With the number keys, enter the desired number of classes, and then press the {q} key. The maximum possible number of classes in one combination is 99. A Press the {Memory/Class} key. E Press the {OK} key. See p. 18 "When Auto Cycle mode is off". ZLKS053E B Use the {~}{}}keys to select Repeat 2, and then press the {OK} key. 60 Skip Feed Printing Skip Feed Printing If the backs of prints are dirty, you can use the {Skip Feed} key to make the drum rotate twice instead of once with every sheet of paper fed. This gives you time to remove prints one by one from the paper delivery tray, or to insert a sheet of paper between two prints. Note You can specify how many times that the drum rotates when the power is turned on. Alternatively, you can also choose whether or not to change the number of rotations temporarily when the {Skip Feed} key is pressed. of Skip Feed" on p. 83 "4 Mode Setting". D Press the {Master Making} key. 1 ZLKS030E Printing starts automatically after the trial print. Note If you wish to check the image before printing, press the {Auto Cycle} key before pressing the {Master Making} key, in order to disable Auto Cycle mode. See p. 18 "When Auto Cycle mode is off". The number of rotations can be set from 2 to 9. The default is 2. A Press the {Skip Feed} key. BQZ009S B Set your original. C Enter the number of prints with the number keys. 61 Operation Program 1 Use this function to store up to nine frequently used print job settings and to recall them for future use. Note The stored contents will not be cleared even when you turn off the main switch. Storing Print Settings A First specify the print settings that you wish to store. B Press the {Program} key. The stored contents cannot be deleted. To change the contents of a program, overwrite it with new print settings. You can store settings for the following functions: · Memory/Class · Edge Erase · Preset Reduce/Enlarge · Type of Original · Fine Mode · Printing Speed · Auto Cycle · Combine/Repeat You cannot store settings for Security mode, nor for the Program function itself. ZLKS037E C Use the {~}{}} keys to select Store, and then press the {OK} key. D Use the {~}{}} keys to select a number. Note If the number is already in use, a message will be displayed asking whether you wish to overwrite the settings stored. Otherwise press the {Escape} key to return to the previous display, and then select another number. E Press the {OK} key. 62 Program Recalling a Program F Press the {Master Making} key. A Press the {Program} key. 1 ZLKS030E ZLKS037E Printing starts automatically after the trial print. Note If you wish to check the image before printing, press the {Auto Cycle} key before pressing the {Master Making} key, in order to disable Auto Cycle mode. See p. 18 "When Auto Cycle mode is off". B Use the {~}{}} keys to select Recall, and then press the {OK} key. C Use the {~}{}} keys to select the number to recall, and then press the {OK} key. The stored settings are displayed. D Confirm that the settings are correct, and then set your original. [. . . ] · Make sure to locate this machine in a large well ventilated room that has an air turnover of more than 30 m3/hr/person. · · · · Environments to avoid · Locations exposed to direct sunlight or strong light (more than 1500 lux). · Locations directly exposed to cool air from an air conditioner or heated air from a heater. (Sudden temperature changes might cause condensation within the machine. ) · Places where the machine might be subjected to frequent strong vibration. [. . . ]