User manual RICOH PRO C901S GRAPHIC ARTS EDITION

[. . . ] In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine. Notes: Some illustrations in this manual might be slightly different from the machine. For details, please contact your local dealer. Notes: The model names of the machines do not appear in the following pages. (For details, see p. 259 "Specifications for the Main Unit". ) · · · Type 1: 90 copies/minute (A4 K, 81/2" × 11"K) Type 2: 110 copies/minute (A4 K, 81/2" × 11"K) Type 3: 135 copies/minute (A4 K, 81/2" × 11"K) Certain types might not be available in some countries. With this machine refer to the metric version. Manuals for This Machine Refer to the manuals that are relevant to what you want to do with the machine. About This Machine Be sure to read the Safety Information in this manual before using the machine. [. . . ] You can also specify the display time and copying method for two sided copying. · Display Time You can select [At Mode Selected] or [Full Time]. · Copying Method in Duplex You can select [2 Sided Copy] or [1 Sided Copy]. Copy Method in Duplex is enabled only when you select [At Mode Selected] in Display Time. 3 Note When paper of the same type and size is loaded in two different paper trays and you want to specify tray for 2 Sided Copy. If one of the trays is specified as the default in Paper Tray Priority, assign 2 Sided Copy to that tray. A mark appears next to the paper tray if [No] is selected in [Apply Auto Paper Select]. [Apply Auto Paper Select] is effective for the copier function only if [Do not Display] or [Recycled Paper] are selected. If [No] is selected, Auto Paper Select is not valid for the tray. 114 Tray Paper Setting on Main and Sub-machines Tray Paper Setting on Main and Sub-machines This section explains the Tray Paper Setting on the two machines during Connect Copy. While connect copy is under way, the {User Tools} keys of the sub-machines remain disabled. If it is desired to change the defaults, press [Connect Copy] that appears in reverse video on the control screen of the main machine, and then, clear the connect copy before making changes. How the defaults in the Tray Paper Settings of copying of the main and sub-machines are used in connect copy will be explained. 3 Paper Tray Priority: Copier (Copier/Document Server) · The main and sub-machines follow their respective set values. · Top to Top · Top to Bottom 117 Copier/Document Server Features Copy Orientation in Duplex Mode You can set the copy orientation when making two-sided copies. · Top to Top · Top to Bottom Reserve Job Mode You can set whether to reset the mode to the initial state or return to the mode in use before the reserved operation was started when you return to the initial screen after reserved copying finishes. · Reset · Previous job 4 Reservation Screen Auto-off Timer You can set the time required until the display is switched to the reserved first job display after reservation is set. If you select "Yes", use the numbers keys to enter the time (10-99 seconds). Copy Quantity The maximum copy quantity can be set between 1 and 9999. Original counter reset key You can set whether to enable the document counter reset key. · On · Off Auto Tray Switching When the paper runs out during copying, it can be automatically fed from a substitute paper feed tray, irrespective of the orientation of paper in that tray ­ provided it is the same size as that set in the other paper feed tray during automatic paper selection. · With Image Rotation You can copy using the Auto Tray Switching function. Depending on the function being performed rotation may not be possible. · Without Image Rotation You can make continuous copies provided paper of the same size and orientation is loaded. The "Supply paper" message appears when paper of the same size and orientation runs out. [. . . ] 4) Remaining components of the software are provided under a standard 2-term BSD licence with the following names as copyright holders: Markus Friedl Theo de Raadt Niels Provos Dug Song Kevin Steves Daniel Kouril Wesley Griffin Per Allansson Jason Downs Solar Designer Todd C. Miller Redistribution and use in source and binary forms, with or without modifica278 tion, are permitted provided that the following conditions are met: 9 Information about Installed Applications 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. [. . . ]