User manual SEVERIN SM 3729

[. . . ] Important safety instructions Before the appliance is used, the main body as well as any attachment fitted should be checked thoroughly for any defects. Should the appliance, for instance, have been dropped onto a hard surface, it must not be used any longer: even invisible damage may have adverse effects on the operational safety of the appliance. In the event of such damage being found, the appliance must no longer be used. [. . . ] During operation, the unit should be placed on a scratch-resistant surface. This appliance is intended for domestic or similar applications, such as in - staff kitchens, offices and other commercial environments, - agricultural areas, - hotels, motels etc. In order to comply with safety regulations and to avoid hazards, repairs of electrical appliances must be carried out by qualified personnel, including the replacement of the power cord. If repairs are needed, please send the appliance to one of our customer service departments. Before using for the first time – Before the appliance is used for the first time, all detachable parts must be thoroughly cleaned as described in the section General care and cleaning. operating button The blender is equipped with 2 push-type operating buttons. Operating button I: low power Operating button II: high power Blender operation – When fitting the blender attachment to the drive unit, ensure that the arrow mark and the open-lock symbol are aligned: to lock, turn the blender attachment so that the arrow on the drive unit is aligned with the lock symbol on the attachment. € Push the blender attachment down into the ingredients in the bowl before switching the unit on with the operation buttons. € Make sure that the attachments can rotate freely inside the bowl and are not blocked during operation. € As soon as the operating button is released, the blender will switch off. Always wait until the motor has come to a complete standstill before lifting the blender attachment from the mixture. Blender models with plastic blender attachment: Do not immerse attachment in hot liquid, or in any other hot substance. For maximum performance, the following recipe may be used: Blend 250 ml water und 250 g carrots for 15 seconds. General care and cleaning Always remove the plug from the wall socket before cleaning the appliance. To avoid the risk of electric shock, do not clean the drive unit or the power cord with water and do not immerse them in water. Do not use abrasives, harsh cleaning solutions or sharp or pointed objects for cleaning. [. . . ] Gebruiksknop I: lage power Gebruiksknop II: hoge power Blender gebruik – Wanneer men het blenderhulpstuk op de aandrijfunit plaatst, moet men ervoor zorgen dat de pijlmarkering en het openslotsymbool juist overeenkomen: om te sluiten, draai het blenderhulpstuk zodanig dat de pijl op de aandrijfunit overeenkomt met het slotsymbool op het hulpstuk. Hvis apparatet for eksempel har været tabt på en hård overflade må det ikke længere anvendes: Selv skader der ikke er synlige kan have ugunstig indvirkning på sikkerheden ved brug af apparatet. Reparation af elektriske apparater skal udføres af en autoriseret fagmand for at følge sikkerhedsregulativet og undgå fare, dette gælder også for udskiftning af ledningen. [. . . ]