Detailed instructions for use are in the User's Guide.
[. . . ] SMCWBR14-GM
Wireless Broadband Router with MIMO Technology
User's Manual
1
Copyright The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the prior written permission. Trademarks All products, company, brand names are trademarks or registered trademarks of their respective companies. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against radio interference in a commercial environment. [. . . ] The settings of DHCP server include the following items: DHCP Server: Choose "Disable" or "Enable. " IP pool starting Address/ IP pool starting Address: Whenever there is a request, the DHCP server will automatically allocate an unused IP address from the IP address pool
to the requesting computer. You must specify the starting and ending address of the IP address pool.
21
Wireless Settings
Wireless settings allow you to set the wireless configuration items. Network ID (SSID): Network ID is used for identifying the Wireless LAN (WLAN). Client stations can roam freely over this product and other Access Points that have the same Network ID. (The factory setting is "default") Channel: The radio channel number. The factory setting is as follow: channel 6 for North America; channel 7 for European (ETSI); channel 7 for Japan. Enabling the security can protect your data while it is transferred from one station to another. WEP Key 1, 2, 3 & 4: When you enable the 128 or 64 bit WEP key security, please select one WEP key to be used and input 26 or 10 hexadecimal (0, 1, 2. . . 8, 9, A, B. . . F) digits. Pass-phrase Generator: Since hexadecimal characters are not easily remembered, this device offers a conversion utility to convert a simple word or phrase into hex. When the 802. 1X function is enabled, the Wireless user must authenticate to this router first to use the Network service. 22
RADIUS Server: IP address or the 802. 1X server's domain-name. RADIUS Shared Key Key value shared by the RADIUS server and this router. This key value is consistent with the key value in the RADIUS server.
WPA-PSK Select Encryption and Pre-share Key Mode. If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2. . . 8, 9, A, B. . . F) digits, if ASCII, the length of Pre-share key is from 8 to 63. Fill in the key, Ex 12345678
23
WPA Check Box was used to switch the function of the WPA. When the WPA function is enabled, the Wireless user must authenticate to this router first to use the Network service. Encryption and RADIUS Shared Key If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2. . . 8, 9, A, B. . . F) digits, if ASCII, the length of Pre-share key is from 8 to 63. If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2. . . 8, 9, A, B. . . F) digits, if ASCII, the length of Pre-share key is from 8 to 63. Fill in the key, Ex 12345678 WPA2(AES) Check Box was used to switch the function of the WPA. When the WPA function is enabled, the Wireless user must authenticate to this router first to use the Network service. Encryption and RADIUS Shared Key If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2. . . 8, 9, A, B. . . F) digits, if ASCII,
24
the length of Pre-share key is from 8 to 63. If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2. . . 8, 9, A, B. . . F) digits, if ASCII, the length of Pre-share key is from 8 to 63. [. . . ] Windows XP will prompt that the authentication process is success or fail and end the authentication procedure. Terminate the test steps when PC2 get dynamic IP and PING remote host successfully. then send the
Support Type: The router supports the types of 802. 1x Authentication: PEAP-CHAPv2 and PEAP-TLS. Windows XP with Service Pack 1 allows 802. 1x authentication only when data encryption function is enable.
51
Appendix C WPA-PSK and WPA
Wireless Router: LAN IP: 192. 168. 2. 1 WAN IP: 192. 168. 122. 216 Radius Server: 192. 168. 122. 1 UserA : XP Wireless Card:Ti-11g Tool: Odyssey Client Manager Refer to: www. funk. com Download: http://www. funk. com/News&Events/ody_c_wpa_preview_pn. asp
52
Or Another Configuration:
WPA-PSK
In fact, it is not necessary for this function to authenticate by Radius Server, the client and wireless Router authenticate by themselves.
Method1: 1. [. . . ]