User manual SOLAC BA5500

[. . . ] ⷠDo not use the appliance if the cord is in poor condition. [. . . ] Before plugging the appliance into the mains, couple the attachments according to the type of mix you want: Fit 1 or 2 rods (8) in the attachment holes (2) and press them up gently until they are fully engaged (Fig. IMPORTANT: The mixer rod with a metal washer should be fitted in the lefthand hole (Fig. When the accessories that are going to be used are in place, plug the appliance into the mains. Pick up the blender and with your thumb move the selector (5) to the desired position (Fig. 3): - Position 0: Off - Position 1-2: Low speed - Position 3-4: Medium speed - Position 5: High speed · We recommend starting off at low speed and gradually increasing it. For heavy or thick mixes, however, it is best to use high speed (nº 5) right from the start to prevent the motor from locking. ⷠMake sure that the rods can turn freely in the container. ⷠThe TURBO button (4) enables you to use the blender at the highest speed possible for a few seconds. [. . . ] Before cleaning the appliance, make sure that it is switched off and unplugged. [. . . ]