User manual SOLAC CA4817

[. . . ] If the power lead is damaged, it should be replaced by the manufacturer or by an authorised after-sales service shop or similar qualified personnel to prevent possible risk. Switch with red pilot light Switch with coffee output warning light Switch with steam warning light Top cover Ground coffee receptacle (max. 3l) Supersteamer control Supersteamer Water level sight glass Filter holder Filter holder with handle Coffee outlet holes 1-cup filter (max 7 gr) 2-cup filter (max 14 gr) Cup-holder tray Coffee dispenser tray Filter holder guide for coffee dispenser Tamper Coffee dispenser control Steam nozzle protector Before first using the coffee appliance, it is best to let the water content equivalent to 8-10 cups run out through the filter holder (with no coffee in the filter). [. . . ] Make sure that the ends of the reservoir pipes are immersed in the water. 1) If you would like to use ground coffee, fill the coffee receptacle (5) with ground coffee. If you want your first coffee to have a higher temperature, set the filter holder in place without coffee and let one or two cups of hot water run out in order to warm the components of the coffee-maker. In addition, we recommend you to stand the cups to be used on the top cover (4) so that they are also warmed during this operation. Plug the coffee-maker into the mains and turn switch (1) to position I. Fit the filter you want to use, for 1 or 2 cups (13 or 14), in the filter holder (11). Place the filter holder (11) in the guides for dispensing the coffee and slide the dispenser lever (19) forwards, until you hear a click, once or twice depending on the filter you are going to use. If you would like to use coffee tablets, open the single-serving bag. ), proceed as stated: once the steam has lost pressure (there is no force), close the supersteamer (7) control, press the coffee output switch (2) until a little liquid issues from the coffee outlet area. When the coffee output switch pilot light (2) comes on, place the receptacle under the steamer (8). When you have the desired amount of hot water, release the coffee output switch (2) and close the steamer control (7). Do not use alcohol, solvents or abrasive products to clean the coffee-maker or tray, just a soft damp cloth. Every now and again, for more thorough cleaning of the steamer, proceed as follows: wait until the steamer cools down and unscrew its cylindrical part, in an anticlockwise direction. wipe the steamer spindle with a damp cloth and soap the cylindrical piece. Make sure that the little hole in the top of the steamer is clear before refitting the piece. Fit the steamer on its spindle and screw it up in a clockwise direction. [. . . ] Make sure that the little hole in the top of the steamer is clear before refitting the piece. Fit the steamer on its spindle and screw it up in a clockwise direction. It is best to de-scale the appliance once a year with a special product for coffee machines so as to maintain the coffee-maker in perfect condition. [. . . ]