User manual STRONG SRT 6130

[. . . ] SAT OUT SAT IN PART 1 • English Thank you for choosing this Strong satellite receiver. This receiver is of our latest development and it is designed to be capable of safely install your receiver and to achieve its optimum performance. 1. 0 Usage This user manual is applicable for Strong SRT 6130 Digital Satellite Receiver and its related accessories. It is advised that first-time and experienced users read this manual in order to safely install the receiver. Strong has supplied this product with the most recent innovations of software and hardware. [. . . ] (Select PAL I for UK , NI or ROI use. ) UHF Channel: Press OK or the Right button and set the UHF channel number to the same UHF channel number of your TV set. This only has to be done if your TV set is connected with a coaxial (RF) Cable. If the UHF Channel numbers of the receiver and the TV set are not set the same, no picture will be displayed. OSD Settings: You can set the OSD (On Screen Display) on your TV to your personal preferences. <Please see inside cover Screen 14> Colour Scheme: Press OK or the Right button and set the colours of the OSD menu to “Basic”, “Colour 1” or “Colour 2”. Transparency: Press OK or the Right button and select how transparent you want your OSD. Brightness: Press OK or the Right button and select how you want the OSD to be. OSD Timeout: Press OK or the Right button and select how long you want the information banner to be on the screen when starting up your receiver or when changing channels. To set the time, apply the following steps <Please see inside cover Screen 15>: 1. Select Time Zone: Press OK or the Right button, and a list of the GMT plus or minus the hours you need for your country is displayed. Using UP/DOWN keys select the correct one, and the receiver will automatically show the current time in your country. To set the time manually: Select GMT usage: Press OK or the Right button and use the UP/DOWN buttons to set the GMT usage to “off”. The time setting menu will now activate the bottom two fields of the menu. Use your UP/DOWN buttons or Numeric buttons [0-9] to set the local time. Select Set Date: Press OK or the Right button and set the date the way you have set the time. 13 PART 1 • English 2. Power on Channel: This function allows you to set the channel you want when the receiver turns on. To set the power on channel, apply the following steps <Please see inside cover Screen 16>: 1. Last Viewed: The receiver will start-up with the channel that you viewed before turning the receiver off. Define Channel: This function allows you to set the channel you want when the receiver turns on. Press OK or the Right button and select in the TV or radio list of channels the channel you want to have your receiver start-up with. System Upgrade: You can download the latest software available including new technologies to your receiver. The receiver will display the message:“Please wait, checking for new software”. [. . . ] If the receiver does not work properly after checking the trouble shooting section, please contact the dealer. Don’t open the receiver cover, it may cause an electrical shock due to high current voltage and the warranty of your receiver will be void if the receiver has been opened Symptoms Cause Solution Check that the power cord is plugged into the wall outlet The green/red lights on front The power cord is not plugged in panel do not light up No picture and sound TV is set to wrong channel Check if the TV is switched on and set your TV to the correct EXT / AV or UHF channel No picture and sound Problem in cable connections Check if the scart and/or RF cable is connected correctly to the TV and to the back of the receiver between receiver and TV No picture and sound Receiver “hang-up” Switch off receiver; disconnect the main power cord of the receiver from the 220 V main power. After 30 seconds reconnect to the main power and check if it is working properly Press the MUTE button on the remote control unit of your receiver and TV. No sound The receiver or TV is in “MUTE” mode No sound or picture Firmly press the scart connectors on the backside of the TV and receiver. Problem in scart cable connections between receiver Replace the scart cable and TV Wrong alignment of the dish. [. . . ]