User manual STRONG SRT 6155

[. . . ] PART 1 · English Thank you for choosing this Strong satellite receiver. This receiver is of our latest development and it is designed to be capable of safely install your receiver and to achieve its optimum performance. 1. 0 Usage This user manual is applicable for Strong SRT 6155 Digital Satellite Receiver and its related accessories. It is advised that first-time and experienced users read this manual in order to safely install the receiver. Strong has supplied this product with the most recent innovations of software and hardware. [. . . ] (Select PAL I for UK , NI or ROI use. ) UHF Channel: Press OK or the Right button and set the UHF channel number to the same UHF channel number of your TV set. This only has to be done if your TV set is connected with a coaxial (RF) Cable. If the UHF Channel numbers of the receiver and the TV set are not set the same, no picture will be displayed. OSD Settings: You can set the OSD (On Screen Display) on your TV to your personal preferences. <Please see inside cover Screen 14> Colour Scheme: Press OK or the Right button and set the colours of the OSD menu to "Basic", "Colour 1" or "Colour 2". Transparency: Press OK or the Right button and select how transparent you want your OSD. Brightness: Press OK or the Right button and select how you want the OSD to be. OSD Timeout: Press OK or the Right button and select how long you want the information banner to be on the screen when starting up your receiver or when changing channels. To set the time, apply the following steps <Please see inside cover Screen 15>: 1. Select Time Zone: Press OK or the Right button, and a list of the GMT plus or minus the hours you need for your country is displayed. Using UP/DOWN keys select the correct one, and the receiver will automatically show the current time in your country. To set the time manually: 13 PART 1 · English Select GMT usage: Press OK or the Right button and use the UP/DOWN buttons to set the GMT usage to "off". The time setting menu will now activate the bottom two fields of the menu. Use your UP/DOWN buttons or Numeric buttons [0-9] to set the local time. Select Set Date: Press OK or the Right button and set the date the way you have set the time. Power on Channel: This function allows you to set the channel you want when the receiver turns on. To set the power on channel, apply the following steps <Please see inside cover Screen 16>: 1. Last Viewed: The receiver will start-up with the channel that you viewed before turning the receiver off. Define Channel: This function allows you to set the channel you want when the receiver turns on. Press OK or the Right button and select in the TV or radio list of channels the channel you want to have your receiver start-up with. System Upgrade: You can download the latest software available including new technologies to your receiver. The receiver will display the message:"Please wait, checking for new software". [. . . ] The selected sound information is saved by channel, and is set to the sound mode when you watch the channel. Color Buttons Within the Videotext mode the color buttons follow the color codes of the broadcaster. 0 - 9 Numeric Direct entry of numerical functions in the menus or in channels selection 19 PART 1 · English A. 1 Trouble Shooting Occasionally receivers can hang-up (just like with a PC) so you are recommended to reset the receiver by disconnecting it from mains power. Wait 30 seconds and connect to mains power again and now check if the unit is working as expected. [. . . ]