User manual TEKTRONIX 80C11 DATASHEET

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual TEKTRONIX 80C11. We hope that this TEKTRONIX 80C11 user guide will be useful to you.


TEKTRONIX 80C11 DATASHEET: Download the complete user guide (337 Ko)

Manual abstract: user guide TEKTRONIX 80C11DATASHEET

Detailed instructions for use are in the User's Guide.

[. . . ] 80C10B Multirate Datacom and Telecom 40 Gb/s The 80C10B module provides integrated and selectable reference receiver filtering, enabling conformance testing at either and 100 Gb/s 1310 nm or 1550 nm for 39. 813 Gb/s (OC-768/STM-256), 41. 25 Gb/s (40GBase-LR), and 43. 018 Gb/s [OTU3, (4×10G LAN PHY)] rates. In addition to the filter rates, the user may also choose selectable bandwidths of 30 GHz, 65 GHz, and 80 GHz for 80C10B for optimal noise vs. The 80C10B is optionally available with Option F1 which extends filter selections to include 27. 739 Gb/s (100GBase-LR4 + FEC and 100GBase-ER4 + FEC), and 25. 781 Gb/s (100GBase-LR4 and 100GBase-ER4 ). The 80C10B is also optionally available in a bundled ordering configuration which includes a 70+ GHz electrical sampling channel. [. . . ] 80C08C CR1 CR2 CR4 80C10B F1 80C25GBE CR1 80C11 CR2 CR3 CR4 Bandwidth 10 10 10 10 80 65 65 (GHz) Wavelength 700-1650 700-1650 700-1650 700-1650 1290-1330 1290-1330 1290-1330 Range (nm) 1520-1620 1520-1620 1520-1620 Fibre Input 9 or 50 or 9 or 50 or 9 or 50 or 9 or 50 or 9 9 9 (m) 62. 5 62. 5 62. 5 62. 5 ­7 ­15 ­15 ­15 ­15 ­8 ­8 Mask Test Sensitivity (dBm) 1 1 1 1 1 1 1 Number of Channels Rates Supported: =Filter, =Optical Clock Recovery, =Electrical Clock Recovery 9. 95 Gb/s 10. 31 Gb/s 10. 52 Gb/s 10. 66 Gb/s 10. 71 Gb/s 11. 1 Gb/s 11. 3 Gb/s 14. 025 Gb/s 25. 78 Gb/s 27. 74 Gb/s 39. 81 Gb/s 41. 25 Gb/s 43. 02 Gb/s 30 1100-1650 9 ­9 1 30 1100-1650 9 ­9 1 30 1100-1650 9 ­9 1 30 1100-1650 9 ­9 1 30 1100-1650 9 ­9 1 www. tektronix. com 3 Data Sheet Optical Modules: 80C12 Module Opt. F1 F2 F3 F4 F5 80C12 F6 FC 10G CR*3 CR*4 Bandwidth 4. 25 9 9 4. 25 9 9 9 10 (GHz) Wavelength 700-1650 700-1650 700-1650 700-1650 700-1650 700-1650 700-1650 700-1650 Range (nm) Fibre Input 9 or 50 or 62. 5 9 or 50 or 62. 5 9 or 50 or 62. 5 9 or 50 or 62. 5 9 or 50 or 62. 5 9 or 50 or 62. 5 9 or 50 or 62. 5 9 or 50 or 62. 5 (m) ­19 ­19 ­19 ­19 ­19 ­19 ­19 ­14 Mask Test Sensitivity (dBm) 1 1 1 1 1 1 1 1 Number of Channels Rates Supported: =Filter, =Optical Clock Recovery, =Electrical Clock Recovery 155 Mb/s 622 Mb/s 1063 Mb/s 1250 Mb/s 2125 Mb/s 2488 Mb/s 2500 Mb/s 3. 125 Gb/s 3. 188 Gb/s 3. 32 Gb/s 4. 25 Gb/s 8. 5 Gb/s*5 9. 95 Gb/s 10. 31 Gb/s*5 10. 52 Gb/s 10. 66 Gb/s 10. 71 Gb/s 11. 1 Gb/s 11. 3 Gb/s *3 With 80A05 or 80A07. *4 With 80A05 Option 10G or 80A07. 80A07 *5 Draft version of the 8. 5GFC filter. New 8. 5GFC filter, as defined in ANSI FC-PI-4 (Rev 8), is identical to the 10GBase-R 10. 313G filter and is available for 80C12 Option 10G modules only; and is identified as 10GBase-R. 4 www. tektronix. com Optical Sampling Modules -- 80C07B · 80C08C · 80C10B · 80C11 · 80C12 · 80C25GBE Electrical Clock Recovery Product Feature / Characteristic Standard 80A05 Option 10G 80A07 OC3/STM1 OC12/STM4 Fibre Channel Gigabit Ethernet SAS Gen I 2 GB Fibre Channel OC48/STM16 2 GB Ethernet PCI Express I Infiniband® SDR 2. 5G G. 709 FEC SAS Gen II XAUI, 10GBase-X 10 GB Fibre Channel ×4 4 GB Fibre Channel FB-DIMM1 PCI Express / Infinband DDR FB-DIMM2 OIF CEI 2x XAUI 8 GB Fibre Channel*5 OC192/STM64 XFP/XFI 10GBase-W 10GBase-R*5 10 GB Fibre Channel G. 975 FEC G. 709 FEC OIF CEI 10 GbE w/ FEC Super FEC User *3 With 80A05 or 80A07. *4 With 80A05 Option 10G or 80A07. 155. 52 Mb/s 622. 08 Mb/s 1. 063 Gb/s 1. 25 Gb/s 1. 50 Gb/s 2. 125 Gb/s 2. 488 Gb/s 2. 50 Gb/s 2. 50 Gb/s 2. 50 Gb/s 2. 666 Gb/s 3. 0 Gb/s 3. 125 Gb/s 3. 188 Gb/s 4. 25 Gb/s 3. 2, 4. 0, 4. 8 Gb/s 5. 0 Gb/s 4. 8, 6. 4, 8. 0, 9. 6 Gb/s 6+ Gb/s 6. 25 Gb/s 8. 50 Gb/s 9. 953 Gb/s 9. 95-11. 2 9. 953 Gb/s 10. 31 Gb/s 10. 51 Gb/s 10. 66 Gb/s 10. 71 Gb/s 11+ Gb/s 11. 10, 11. 3 Gb/s 12. 50 Gb/s User selectable *4 *4 *4 *4 *4 *4 *3, *4 *3, *4 *3, *4 *3 *3 Partial *3 *3 *3 *3 *3 *3 *3 *3 *3 *3 *3 Full *5 Draft version of the 8. 5GFC filter. *6 Bandwidths shown are warranted unless printed in an italic typeface which represents a typical value. 80C08C, 80C12: Bandwidths and optical filters valid for OMA 500 uW (1550/1310 nm), OMA 860 uW (850 nm), OMA 1020 uW (780 nm). Note: Refer to Optical Sampling Modules User Manual for more detailed information. 6 www. tektronix. com Optical Sampling Modules -- 80C07B · 80C08C · 80C10B · 80C11 · 80C12 · 80C25GBE Optical Sampling Module Characteristics (Cont. ) Module Clock Recovery (Optional) Clock Recovery Outputs Unfiltered Optical Bandwidth*6 Absolute Maximum Nondestructive Optical Input Internal Fibre Diameter 80C07B 80C08C Option CR1: 155 Mb/s, 622 Mb/s, 1. 063 Gb/s, 1. 250 Gb/s, 2. 125 Gb/s, 2. 488 Gb/s, 2. 500 Gb/s, 2. 666 Gb/s Option CR1: 9. 953 Gb/s, 10. 31 Gb/s; Option CR2: 10. 31 Gb/s, 10. 52 Gb/s; Option CR4: Continuous from 9. 8 Gb/s to 12. 6 Gb/s ±Clock, ±Data 2. 5 GHz 5 mW average; 10 mW peak power at wavelength of highest responsivity 1 mW average; 10 mW peak power at wavelength of highest responsivity 62. 5 m/125 m Multi Mode 62. 5 m/125 m Multi Mode Clock, Clock/16 10 GHz 80C10B*6 80 GHz 80C11 80C12 Option CR1: 9. 953 Gb/s; Option CR2: 9. 953 Gb/s, 10. 664 Gb/s; Option CR3: 9. 953 Gb/s, 10. 709 Gb/s; Option CR4: Continuous between 9. 8 Gb/s to 12. 6 Gb/s Provided by 80A05 or 80A07 (sold separately) CR1: Clock, Clock/16, Data; CR2, CR3, CR4: Clock, Clock/16 30 GHz 20 mW average; 60 mW peak power at wavelength of highest relative responsivity 5 mW average; 10 mW peak power at wavelength of highest responsivity 9 m/125 m Single Mode 9 m/125 m Single Mode ELECTRICAL SIGNAL OUT 9 GHz (for all options except 10G) 10 GHz (Option 10G) 1 mW average; 10 mW peak power at wavelength of highest responsivity 62. 5 m/125 m Multi Mode *6 Bandwidths shown are warranted unless printed in an italic typeface which represents a typical value. 80C08C, 80C12: Bandwidths and optical filters valid for OMA 500 uW (1550/1310 nm), OMA 860 uW (850 nm), OMA 1020 uW (780 nm). Optical Sampling Module Characteristics (Cont. ) Module Optical Return Loss Fibre Input Accepted RMS Optical Noise (Typical) RMS Optical Noise (Maximum) Independent Channel Deskew 80C07B 80C08C 80C10B >14 dB (Multi Mode) Single or Multi Mode >24 dB (Single Mode) >14 dB (Multi Mode) Single or Multi Mode >24 dB (Single Mode) >30 dB Single Mode 0. 50 W at 155 Mb/s, 622 Mb/s, 1063 Mb/s, 1250 Mb/s; 0. 70 W at 2. 488/2. 500 Gb/s 1. 7 W at all filter rates (1550/1310 nm, no CR) 1. 0 W at 155 Mb/s, 622 Mb/s, 1063 Mb/s, 1250 Mb/s; 1. 5 W at 2. 488/2. 500 Gb/s 3. 0 W at all filter rates (1550/1310 nm) 1310 nm 1550 nm 28 uW (25. 8, 38 uW (25. 8, 27. 7 Gb/s) 27. 7 Gb/s) 35 uW (30 GHz) 45 uW (30 GHz) 50 uW (39. 8 Gb/s 38 uW (39. 8 Gb/s - 43. 0 Gb/s) - 43. 0 Gb/s) 60 uW (65 GHz) 75 uW (65 GHz) 105 uW (80 GHz) 130 uW (80 GHz) 8. 0 W at all filter rates; 10. 0 W at 14. 025 GHz 14. 0 W at 20 GHz 30. 0 W at 30 GHz 2. 5 W (all filters except Option 10G) 5. 0 W ('Full BW' and Option 10G filters) 1310 nm 38 uW (25. 8, 27. 7 Gb/s) 75 uW (65 GHz) 1550 nm 28 uW (25. 8, 27. 7 Gb/s) 60 uW (65 GHz) Standard Standard Standard 80C11 80C12 80C25GBE 1310 nm 1550 nm 15 uW (25. 8, 21 uW (25. 8, 27. 7 Gb/s) 27. 7 Gb/s) 19 uW (30 GHz) 26 uW (30 GHz) 28 uW (39. 8 Gb/s 20 uW (39. 8 Gb/s - 43. 0 Gb/s) - 43. 0 Gb/s) 33 uW (65 GHz) 44 uW (65 GHz) 55 uW (80 GHz) 72 uW (80 GHz) >30 dB Single Mode 5. 5 W at all filter rates; 7. 0 W at 14. 025 GHz 10. 0 W at 20 GHz 20. 0 W at 30 GHz 1. 3 W (all filters except Option 10G) >14 dB (Multi Mode) Single or Multi Mode 2. 4 W ('Full BW' and Option 10G filters) >24 dB (Single Mode) >30 dB 1310 nm 1550 nm Single Mode 15 uW (25. 8, 21 uW (25. 8, 27. 7 Gb/s) 27. 7 Gb/s) 33 uW (65 GHz) 44 uW (65 GHz) Standard Standard Standard www. tektronix. com 7 Data Sheet Optical Sampling Module Characteristics (Cont. ) Module Offset Capability Power Meter Power Meter Range Power Meter Accuracy Mask Test Optical Sensitivity*7 80C07B Standard Standard +4 dBm to ­30 dBm 5% of reading 80C08C 80C10B, 80C25GBE Standard Standard Standard Standard 0 dBm to ­30 dBm +13 dBm to ­21 dBm 5% of reading 5% of reading 80C11 80C12 Standard Standard Standard Standard +4 dBm to ­30 dBm 0 dBm to ­30 dBm 5% of reading 5% of reading ­22 dBm at 155 Mb/s, 622 Mb/s; ­20 dBm at 2488/2500 Mb/s ­16 dBm at all filter rates 25. 8 and 27. 7 Gb/s: ­8 dBm (1550 nm) and ­7 dBm (1310 nm); 39. 813 to 43. 018 Gb/s: ­7 dBm (1550 nm) and ­6 dBm (1310 nm) ­12 dBm at all filter rates; ­5 dBm at 20 GHz; ­6 dBm at 30 GHz ­19 dBm (for all options except Option 10G) ­14 dBm (for Option 10G) *7 Smallest power level for mask test. Values represent theoretical typical sensitivity of NRZ eyes for comparison purposes. Assumes instrument peak-peak noise consumes most of the mask margin. Optical Sampling Module Characteristics (Cont. ) Module Extinction Ratio Calibrated Accuracy (Opt. 01 ER Calibrated)*8 Accuracy Reference Filter Repeatability (Typical) in Range (Gb/s) (to itself and to other 80Cxx-Opt. 01) Ordering Information 80C07B Multirate Datacom and Telecom Optical Sampling Module. Includes: User Manual, FC/PC Optical Connector. 80C08C 80C07B 80C08C 80C10B 80C11 -- 9. 9. . . 11. 3 -- 9. 9. . . 11. 3 Option not available ±0. 6% (­0. 39 dB / ±1. 2% (­0. 76 dB / +0. 42 dB at 12 dB) +0. 92 dB at 12 dB) Option not available ±0. 6% (­0. 39 dB / ±1. 2% (­0. 76 dB / +0. 42 dB at 12 dB) +0. 92 dB at 12 dB) Multirate Datacom and Telecom Optical Sampling Module. Includes: User Manual, FC/PC optical connector. 80C10B*7 Multirate Optical Sampling Module ­ 80 GHz. Includes: User manual, FC/PC optical connector. *8 Low ER signals (ER 6 dB): signal passes 802. 3ae-like mask (scaled horizontally for bit rate); 105 samples in mask. High ER signals (ER > 6 dB): signal passes OC-192-like mask (scaled horizontally for bit rate); 105 samples in mask. 80C11 Multirate Datacom and Telecom Optical Sampling Module. The 80C12 Multirate Telecom and Datacom Optical Sampling Module is available with a wide variety of factory-configured signal conditioning options. These options provide a variety of reference receiver filtering and unfiltered signal acquisition bandwidths. The user must specify one of the following options when ordering this module. Physical Characteristics Module Width Dimensions (mm/in. ) Height Depth Weight (kg/lb. ) Net 80C12 80C07B 80C08C 80C10B 80C11 80C12 80C25GBE 165/6. 5 165/6. 5 165/6. 5 165/6. 5 165/6. 5 165/6. 5 25/1. 0 25/1. 0 25/1. 0 25/1. 0 25/1. 0 25/1. 0 305/12. 0 305/12. 0 305/12. 0 305/12. 0 305/12. 0 305/12. 0 <1. 36/<3. 0 <1. 22/<2. 7 <2. 61/<5. 75 <1. 22/<2. 7 <2. 61/<5. 75 <2. 61/<5. 75 80C25GBE Multirate Optical Sampling Module ­ 65 GHz. [. . . ] F1 80C11 Note: For LC connector please use LC to FC/PC patch cable and connect to the default FC/PC. Product(s) are manufactured in ISO registered facilities. Opt. 01 80C12 The user must specify one of the following options when ordering this module: Opt. F4 2125, 3125, 3187. 5, 4250 Mb/s filters, 4. 25 GHz full bandwidth Opt. 10G 8. 5, 9. 95, 10. 31, 10. 52, 10. 66, 10. 71, 11. 1, 11. 3 Gb/s filters, 10 GHz full bandwidth *7 Smallest power level for mask test. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE TEKTRONIX 80C11




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual TEKTRONIX 80C11 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.