User manual THOMSON 14MG10F

[. . . ] A set changed in any of the above ways no longer complies with the manufacturer's specifications and should not be put back into service. 2. · Clean the front and cabinet using a soft cloth dipped in mild detergent. The use of solvents such as white spirit or alcohol­based products may damage your set. · Make sure to clean the vents at the rear of your set regularly. 3. [. . . ] To help identify the programmes, we suggest that you have to hand a TV guide or daily newspaper. Check that any equipment connected only via the aerial (video recorder or satellite equipment) is operating. Switch off any equipment connected via the SCART socket. GB Installation Press the ON/OFF button, the indicator lamp lights up. If the television set remains on stand­by, press one of the buttons on the remote control numerical keypad. When the television set is turned on for the first time, the Installation menu appears automatically. If this is not the case, you can call it up by: ­ pressing the times. button on the remote control three AUTO INSTALL. EURO A new menu appears. The cursor moves from left to right on the VL line, then on the VH line and then on the U line. The channels found are stored in memory in order starting from programme PR 01. AUTO INSTALL. EURO VL You can stop the automatic search at any time by pressing PR01 the button. The search stops automatically at the end of the U band or when 99 channels have been found. The channel stored on programme PR 01 is selected (see next page). 5 Changing a Programme Number Select the channel number to be changed using the button. AUTO INSTALL. Using the numerical keypad on the remote control, enter the new programme number. GB You can also use the Press the buttons on the remote control. EURO VL PR01 button to confirm the change. The programmes stored under the old and new numbers are then swapped. Repeat this operation to change other programme numbers. Erasing a Programme Select the programme to be erased using the button. Enter 0 or 00 on the numerical keypad of the remote control. button, then press Check that all the programmes are in the required order using the to leave the menu. 6 Manual Channel Setting Press the button twice to call up the channel setting menu. 1. Channel Search Select the 2nd line of the menu using the Start the search by pressing: ­ the ­ the button for a forward search, button for a backward search. EURO VL PR button. GB The search fully covers the VL, VH and U bands starting from the channel on the screen. The cursor moves and as soon as a channel is found, the picture appears on the screen. Wait for the menu to go to the bottom of the screen for optimum reception. If the picture corresponds to the channel required, go to the 4th line (PR), otherwise continue the search. If you wish to stop the automatic search, press the button. 2. Programme Number and Storing in Memory Select the 4th line of the menu using the button. EURO VL PR If fine tuning is necessary, see Fine Tuning Enter a programme number using the numerical buttons of the remote control. You can also use the buttons. button. Store the programme number you have allocated to the channel by pressing the The 2nd line of the menu is then selected again. Restart the search using the buttons. 7 3. Fine Tuning Only necessary in the event of interference If fine tuning is necessary, select the 3rd line of the menu using the button. [. . . ] Press the The sound returns if the button is pressed again. Zapping Press the buttons to scroll through the programmes stored in memory. Personal Adjustments Press the red button to call up your personal adjustments (See Picture Adjustments). Display Press the yellow button to display the programme number and stand­by time (if sleep timer command is activated). If the channel has been fine tuned, the This information disappears automatically after a few seconds. button Stand-by - Sleep Timer Press the button to switch the television set to stand­by mode. The television set will automatically switch to Stand­by after a few minutes if there is no signal on the channel being watched. Child Lock You can prevent the use of your television set using the keypad. [. . . ]