Detailed instructions for use are in the User's Guide.
[. . . ] to other Device Buttons Warranty and Specifications Glossary Appendix Assignment of Audio/Video Equipment Set Up Code Tables Audio Satellite TV VCR Cable CD DVD AUX 2 3 3 3 4 4 5 8 8 10 12 13 14 15 15 16 17 17 17 18 20 22 24 25 26 27 29 30 32 32 33 33 36 38 41 44 46 48 49
1
Introduction
The Home Theater Master ROC1407 remote control is preprogrammed to operate over 1, 000 Audio and Video components so that you can set it up by simply punching in a three digit code number that matches your equipment. The Home Theater Master ROC1407 remote control operates up to eight different audio and video devices in your home entertainment system. They are listed below: 1 2 3 4 5 6 7 8 TVs, Monitors, Video/LCD Projectors VCRs, TV/VCR combination units Cable boxes, Internet set-tops Satellite receivers - DSS, Primestar, Dish, DBS, C-Band Audio receivers, Preamplifiers, Surround processors Compact disc players, Multi-Disc changers DVD, Laser disc players, Cassette decks Cassette Tape Players, DAT, MiniDisc, Switchers, Lighting, Home Control Devices, and Line Doublers
Setting up the remote control to work with your equipment is simple. The remote control also has many advanced features that can add ease and enjoyment to the operation of your home entertainment system. [. . . ] Note: Some audio/video devices have separate buttons for POWER ON and POWER OFF. To operate these devices on the remote, press the corresponding DEVICE Button to turn the equipment ON and press the POWER button to turn the equipment OFF. Please try all the functions of this remote control with your equipment. The LCD will display 2 IN_XX indicating +10 0Audio input selected (IN_V1, the IN_V2, IN_CD, etc. or IN_0, IN_1, IN_2 etc. ) and then JOIN.
NEXT
3. CH
ENTER
SHIFT
ALT
PIP
TEST
TUNER
CD
TAPE1
14
TAPE2
PHONO
VCR1 VCR2/SAT LDP
AUX
TV
M1
M2
M3
M4
LIGHT
HOME THEATER MASTER
LEARNING REMOTE CONTROL
Appendix
A: Assignment of Audio/Video Equipment
Please use the following listing to locate the correct Set-Up Code Tables for your equipment: AUDIO Set-Up Code Table: Audio Receivers, Preamplifiers, Surround Processors Satellite Set-Up Code Table: DSS, Primestar, DBS, Echostar, C Band receivers TV Set-Up Code Table: TVs, Monitors, Video/LCD Projectors VCR Set-Up Code Table: VCRs, TV/VCR combination units CABLE Set-Up Code Table: Cable Boxes, Internet/TV Set-Tops CD Set-Up Code Table: CD Players, CD Changers DVD Set-Up Code Table: DVD Players, Laser Disc AUX Set-Up Code Table: Cassette Tape Players, DAT systems, MiniDisc, Switchers, Lighting, Home Control Devices, and Line Doublers
32
Glossary
Punch Through Advanced feature that enables you to operate Volume, Channel or Transport Control functions of one device while in another mode. Example: Audio Volume Control "Punch Through" gives you the ability to raise, lower and mute your Audio receiver volume while operating the remote control in the TV mode. Set-Up Code Number The three-digit number that is used to program the remote control for your particular manufacturer or brand of audio/ video equipment. Set-Up Code numbers are located in tables in the appendix on pages 33 - 50 of the instruction manual. You should test the functions for each of the Set-Up Code numbers that work with your device to determine the best Set-Up Code number for your particular device. Note: Some devices, such as CD players and DVD Decks that do not have POWER buttons on their original remote controls, may not shut off during programming. For these devices, it may be necessary to first store the Set-Up Code number and then test functions like PLAY, STOP, etc. , to determine if the correct SetUp Code number has been selected. The AUDIO or TV Volume Control "Punch Through" is now turned off. The VOLUME and MUTE of the original device will operate on the remote control.
Channel Control "Punch Through"
You can program the remote so that either the SAT or Cable Channel Controls (CHANNEL UP and DOWN) will also operate in other modes on the remote control. Example: Change CHANNELS UP and DOWN on your cable box while the remote is in the TV mode. Note: When this feature is active, SAT or Cable CHANNEL UP and DOWN will override any existing channel controls in that mode.
To Set-Up: 1 Select the mode that you wish to program for Channel
Control "Punch Through. "
2 Press the corresponding Device Button and the MUTE
button simultaneously. PUNCH will appear
in the LCD.
18
Advanced Features
4 Press either the SAT Device Button to set-up for SAT
Channel Control or the CBL Device Button to set-up for Cable Channel Control. Either SAT or CBL will flash in the LCD, depending on the Device Button selected. SAT or Cable Channel Controls will now override the original CHANNEL UP and DOWN in this mode.
To Return to the Original Setting: 1 Select the mode that you want to turn off the Channel
Control "Punch Through. "
2 Press the corresponding Device Button and the MUTE
button, simultaneously. PUNCH will appear
in the LCD.
4 Press the same Device Button again. The SAT or Cable Channel Control "Punch Through" is now turned off. The CHANNEL UP and DOWN of the original device will now operate on the remote control.
19
Advanced Features
Your device will turn off when the correct Set-Up Code number has been selected. If it does not turn off, select the next Set-Up Code number from the table, and press in that code number. [. . . ] Press the MUTE button (to turn on the Satellite receiver) M2__07 will appear in the LCD.
Power On/Off is located on the MUTE button during the programming mode.
4 Press the CHANNEL UP button. SAVE will flash in the
LCD, and the remote will return to the AUDIO mode.
Erasing Memory Buttons 1 Select the mode (AUD or SAT) in which you want to
erase the Memory Button.
2 Press the corresponding Device Button (AUD or SAT) and
MUTE button, simultaneously. Note: Any previously stored commands on a Memory Button will be erased when new commands are stored on the same Memory Button.
25
Advanced Features
B: Memory Buttons
There are five memory buttons (M1~M4, Power) that are designed to store up to 15 commands in each button. Pressing any one of the memory button will send out the series of commands that are stored in the button.
AUD AUD CD CD DVD DVD AUX AUX SAT SAT TV TV VCR VCR CBL CBL
You can either turn on or off up to eight devices by storing CH CH VOL VOL Power on/off commands or use it to select the favorite channels by storing channel numbers into the button. [. . . ]