Detailed instructions for use are in the User's Guide.
[. . . ] Should you use it, in exceptional circumstances in the open air (example: on the balcony, in the veranda or tent), you must absolutely protect it against moisture (dew, rain, splash water). Before switching on a cold TV set in a warm room, you should wait until any condensation in the screen has dried by itself. In the evening, after TV programmes or in case of a long absence, it is recommended to turn of the apparatus at the main switch. Even when the On/Off switch is in the ÒOffÓ position and even though it does not consume any current, the television is not completely separated from the mains supply. [. . . ] - Memorise it with OK and then quit the menu with Exit.
Automatic Channel Set-up
With the Automatic Channel Set-up ¥ When a VCR or satellite receiver is connected to the aerial socket, you must switch on this equipment. Should external equipment be connected to the TV set via the SCART socket, it must be turned off. The first time you switch your TV set on, the automatic installation (AUTO INSTALL. ) will automatically appear. If it does not, you will find this menu by pressing a number of times on the remote control menu key: - 3 times for the mono TV sets - 4 times for the stereo TV sets. ¥ Depending on the model of your TV set, youÕll have to select from the options listed below the one that fits with your country: EURO : Western Europe, Tunisia, Morocco FR : France, Luxembourg UK : United Kingdom, Eire DK : Eastern Europe, Middle East, Africa, French DOM-TOM Select corresponding option by means of the directional keys Left/Right. This line allows you to select a set-up to be carried out either through channels (CH/CC) or through frequencies (MHz). ¥ Select the type of wished-for set-up through the directional Left/Right keys.
4
tx807en2
15/01/03 12:26
Page 5
Manual Channel Set-up
With the manual set-up 1. Display the menu by pressing a number of times on the remote control menu key: - twice for the mono TV sets. Depending on the model of your TV set, youÕll have to select from the options listed below the one that fits with your country: EURO : Western Europe, Tunisia, Morocco FR : France, Luxembourg UK : United Kingdom, Eire DK : Eastern Europe, Middle East, Africa, French DOM-TOM Select corresponding option by means of the directional keys Left/Right. By means of the Left/Right directional keys, select ANTENNA (reception through an aerial antenna) or CABLE (reception through a cable network) for a Channel set-up, or MHz for a Frequency set-up. Start the set-up in a decreasing or increasing order by means of the Left/Right directional keys. If the picture quality is poor, make use of the directional keys Up/Down to select the line ->. <- and try to improve picture quality with the directional keys Left/Right. line through the Up/Down directional keys 7. If the station is encrypted and if you want to connect a decoder to the AV socket, tick the box with the Left/Right keys. Then select the Pr line through the Up/Down directional keys and enter the channel number corresponding to the pictures. Select the Text line through the Up/Down keys and choose the character set table to be used for videotext:
1: Western Europe 2: Eastern Europe, Russia 3: Greek 4: Arab 5: Ukrainian 6: Bielo-Russian For more details, refer to the table on the next page. To find the next programme, re-start Channel Set-up by means of the directional keys Left/Right. Once the set-up achieved, close the menu through exit.
Adjusting the Picture
Press the menu key once to display the menu. Through the Up/Down keys, select the function you want to adjust (Brightness, Colour, Contrast, Sharpness, Tint). If you wish to preserve these adjustments as preferential, press the red button to memorise them. Settings are stored until you proceed to another change.
Adjusting the Sound
(only on stereo models) Press the menu key twice to display the menu. Through the Up/Down keys, select the function you want to adjust (Treble, Bass, Balance, Mode). With the Left/Right keys, adjust the Treble or Bass level, the balance between left and right paths and the type of sound you want (Mono or Auto). [. . . ] If the TV set has been turned on by the VCR, it will return to stand-by as soon as the VCR is switched off. Audio/Video sockets (2) (If included) The Audio/Video sockets allow you to connect a VHSor 8 mm-camcorder. To visualise the pictures from the camcorder, select the proper socket with the av key. Not to degrade the picture and sound quality, do not turn on the devices connected to the scart socket and to the Audio/Video socket at the same time. [. . . ]