User manual TOYOTA CAMRY 2007

[. . . ] '07Camry_U (L/O 0601) Foreword Welcome to the growing group of value-conscious people who drive Toyotas. We are proud of the advanced engineering and quality construction of each vehicle we build. Please read it thoroughly and have all the occupants follow the instructions carefully. Doing so will help you enjoy many years of safe and trouble-free motoring. [. . . ] To ensure correct programming into the HomeLink:, install a new battery in the hand-held transmitter prior to programming. The battery side of the hand-held transmitter must be pointed away from the HomeLink: during the programming process. For Canadian users, follow the procedure in "Programming an entrance gate/programming all devices in the Canadian market". Decide which of 3 HomeLink: buttons you want to program. : The garage door opener ( Universal Transceiver) is manufactured under license from HomeLink: and can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, and security systems, etc. 271 2007 CAMRY from Jan. (OM33669U) '07Camry_U (L/O 0601) HomeLinkB 25 to 75 mm (1 to 3 in. ) Hand-held garage transmitter 2. Place your hand-held garage transmitter 25 to 75 mm (1 to 3 in. ) away from the surface of the HomeLink:. Keep the indicator light on the HomeLink: in view while programming. 3. Simultaneously press and hold the hand-held garage transmitter button along with the selected HomeLink: button. When the indicator light on the HomeLink: changes from a slow to a rapid flash after 20 seconds, you can release both buttons. 5. Test the operation of the HomeLink: by pressing the newly programmed button. If programming a garage door opener, check to see if the garage door opens and closes. If the garage door does not operate, identify if your garage transmitter is of the "Rolling Code" type. The garage door has the rolling code feature if the indicator light (on the HomeLink:) flashes rapidly and then remains lit after 2 seconds. If your garage transmitter is the "Rolling Code" type, proceed to the heading "Programming a rolling code system". 272 2007 CAMRY from Jan. Repeat steps 2 through 5 for each remaining HomeLink: button to program another device. Programming a rolling code system If your device is "Rolling Code" equipped, it is necessary to follow steps 1 through 4 under the heading "Programming the HomeLink:" before proceeding with the steps listed below. Locate the "training" button on the ceiling mounted garage door opener motor. The exact location and color of the button may vary by brand of garage door opener. Refer to the owner's guide supplied by the garage door opener manufacturer for the location of this "training" button. Press the "training" button on the ceiling mounted garage door opener motor. Following this step, you have 30 seconds in which to initiate step 3 below. Press and release the vehicle's programmed HomeLink: button twice. [. . . ] If the Licensed Data is being acquired by or on behalf of the United States government or any other entity seeking or applying rights similar to those customarily claimed by the United States government, (i) for acquisitions conducted by the Department of Defense, the Licensed Data is licensed with "Limited Rights" in accordance with the rights set forth at DFARS 252. 227-7013(b)(3), TECHNICAL DATA-NONCOMMERCIAL ITEMS, and Licensed Data delivered or otherwise furnished with "Limited Rights" shall be marked with the following "Limited Rights Notice" set forth at DFARS 252. 227-7013(f)(3), and shall be treated in accordance with such Notice: LIMITED RIGHTS CONTRACTOR (MANUFACTURER/ SUPPLIER) NAME: NAVTEQ North America, LLC CONTRACTOR (MANUFACTURER/ SUPPLIER) ADDRESS: 222 Merchandise Mart Plaza, Suite 900, Chicago, Illinois 60654 The Government's rights to use, modify, reproduce, release, perform, display, or disclose these technical data are restricted by paragraph (b)(3) of the Rights in Technical Data-Noncommercial Items clause contained in the above identified contract. Any reproduction of technical data or portions thereof marked with this legend must also reproduce the markings. Any person, other than the Government, who has been provided access to such data must promptly notify the above named Contractor. 192 APPENDIX and; (ii) for civilian agency acquisitions, the Licensed Data is licensed in accordance with the rights set forth at FAR 52. 227-14(g)(1), RIGHTS IN DATA- GENERAL (Protection of limited rights data and computer software). In the event that the Contracting Officer requires the delivery of limited rights Licensed Data that has been withheld or would otherwise be withholdable in accordance with FAR 52. 227-14(g)(1), the Licensed Data is licensed with "Limited Rights" as set forth in the following "Limited Rights Notice" at FAR 52. 227-14(g)(2) (Alternate II), which shall be affixed to the Licensed Data and the Licensed Data shall be treated in accordance with such Notice (which shall be marked on any reproduction of these data, in whole or in part): LIMITED RIGHTS NOTICE (JUN 1987) These data may be reproduced and used by the Government with the express limitation that they will not, without written permission of the Contractor, be used for purposes of manufacture nor disclosed outside the Government; except that the Government may disclose these data outside the Government for the following purposes, if any, provided that the Government makes such disclosure subject to prohibition against further use and disclosure: There are no additional purposes permitting disclosure of such Data. [. . . ]