User manual TP-LINK TL-SF1008D

[. . . ] These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in-stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. [. . . ] Set the motion detection area by selecting the area grids with your mouse. Pink grids represent the area that is not being detected while the transparent grids are the area under detection. Click "" (Select All) to set the whole area under detection. After setup, click "Apply" to confirm. In this section, you can select to enable the function of E-mail and/or FTP notification. Item Method Description ·Email If the E-mail notification function is activated, the network camera will send the captured video clip to the assigned E-mail address(s) once motion-trigger or alarm-trigger recording happened. ·FTP If the FTP notification function is activated, the network camera will upload the captured video clip to the specified FTP site once motion-trigger or alarm-trigger recording happened. The video type will vary according to the setting of "Stream Format" in the " Total Time " (Address Book) page. Video Type If you've set the video type as MPEG4, you can set the record time of the notification video clip as 1 ~ 5 seconds. If you've set the video type as JPEG, then this option stands for 1 ~ 5 images. 28 TL-SF1008D Note: 3GPP Surveillance Camera If your network camera & mail server are not connected by LAN, and the network connection is not stable or failed, the notification method by Email or FTP might be failed. Sometimes the length of the video clip emailed or uploaded might not be the same as the one you specified in "Total Time". This is because the system can only emailed or uploaded up to 500KB video clip. 5. 4. 2 Network " (Miscellaneous Control) " " (Server Setting) "Network" to go into the "Network" Click " page. Choose a domain 33 TL-SF1008D SNTP 3GPP Surveillance Camera " (Miscellaneous Control) " SNTP (Simple Network Time Protocol) is for time setting. Click " (Server Setting) "Network" "SNTP" to go into the "SNTP" page. " Function Description GMT (Greenwich Mean Once users choose the time zone, the network camera will adjust the local Time) area time of the system automatically. Server Name Sync Server Time FTP " (Miscellaneous Control) " " (Server Setting) "Network" "FTP" to go into the Click " "FTP" page. Enter the detailed FTP information and press "Apply" to confirm. The information you set here will be applied when the function of FTP notification is enabled in the "Trigger" menu. use the default SNTP server (For example, The network camera will synchronize the time with the network time. MAIL 34 TL-SF1008D 3GPP Surveillance Camera Click " " (Miscellaneous Control) " " (Server Setting) "Network" "MAIL" to go into the "MAIL" page. Enter the detailed E-mail information and press "Apply" to confirm. The information you set here will be applied when the function of E-mail notification is enabled in the "Trigger" menu. Function Server Mail From Verify Password Email Address Description Enter the SMTP server address provided from your e-mail system supplier. Enter the entire mail address to ensure E-mails will not be blocked by SMTP. Please enter the "user name" and "password" of the sender account. Add the E-mail address(s) of the assigned recipient(s). Note: Users can assign up to 4 mail accounts for E-mail notification. [. . . ] The port number of the connected device (such as DVR or network camera) is NOT 80. Device 8. 2 Installation and Setup 8. 2. 1 Software download STEP1:To download the software for mobile surveillance, please visit the following website address from your PDA or mobile phones: http://211. 22. 74. 18/ Note: 1. The Internet access setting via WiFi or GPRS / 3G networks varies depending on different PDA or mobile phone brand. For details, please refer to its individual user manual, or check with your local network operator or service provider. [. . . ]