Detailed instructions for use are in the User's Guide.
[. . . ] User's Guide
TL-SL3226P
24+2G Gigabit Managed Switch
Rev 1. 0
E-mail: export@tp-link. com. cn
Trademark, Copyright statement
is the registered trademark of Shenzhen TP-LINK Technologies Co. , Ltd. No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from Shenzhen TP-LINK Technologies Co. , Ltd. See our web site for more details: http://www. tp-link. com.
Table of contents
Checklist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Chapter 1 1. 1 1. 2 1. 3 About this User's Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Usage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Assumpsit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Overview of this User's Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Chapter 2 2. 1 2. 2
Overview of the product. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Features and specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. 2. 1 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. 2. 2 Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Chapter 3 3. 1 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. 1. 1 Desktop or Shelf Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. 1. 2 Rack Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. 1. 3 Power On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3. 2 Connecting the Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3. 2. 1 Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3. 2. 2 Rear Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3. 2. 3 Optional Extension Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3. 3 Remarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 TELNET/Out-of-Band Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Chapter 4 4. 1
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4. 2 4. 3 4. 4
How to connect TELNET. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 How to connect Out-of-Band. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 The interface and operating way of TELNET/Out-of-Band. . . . . . . . 14
4. 4. 1 Configure System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 4. 4. 2 Port Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 4. 4. 3 Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 4. 4. 4 Spanning Tree protocol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 4. 4. 5 IEEE802. 1X protocol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 4. 4. 6 VLAN Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 4. 4. 7 Configure Trunk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Chapter 5 5. 1 5. 2 WEB Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Connection of WEB Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 RJ-45 Plug/Connector Pin Specification. . . . . . . . . . . . . . . . . . . . . . . . . 34 Default Configuration of the switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Annex A Annex B
TL-SL3226P
24+2G Gigabit Managed Switch User's Guide
TL-SL3226P
24+2G Gigabit Managed Switch User's Guide
Checklist
Open the box and carefully unpack the TL-SL3226P. One TL-SL3226P Switch One AC power cable One Serial cable One User's Guide (CD or Presswork) Two mounting brackets and screws
1. 3 Overview of this User's Guide
Chapter 1 Chapter 2 Chapter 3 About this User's Guide Introduction. [. . . ] After you log on, you will in the first menu as following:
table, static address table and filter address table. The Spanning Tree protocol includes the Switch configuration (Open/Close Spanning Tree, Network Bridge Priority) and port configuration. IEEE802. 1X protocol includes Switch configuration, port configuration, force authorized table, force unauthorized table and authorized address table. VLAN Management includes VLAN mode configuration (Port-based VLAN, IEEE802. 1Q Tag VLAN and VLAN Disable), VLAN configuration and MTU VLAN team.
Figure 4-2 Main Menu
!
Trunk Configuration is to configure and check Trunk. SNMP protocol includes SNMP agent situation, SNMP team name table (such as access mode, situation), SNMP host table (such as IP address, team name, situation), SNMP Trap purpose table (purposed IP address, port, situation), and SNMP system event. Priority Management includes Port priority, priority mapping, and priority configuration. Security Configuration menu is used to configure the user managing the Switch (such as user's name, password, situation). Help is used to check the usage of kinds of control button (such as direction button, TAB button).
Illumination:
System Configuration includes system information such as software/hardware version, module information, switch parameter such as broadcast storm filter mode, file transmission, save and reset. Ports Management includes port parameter (open/close flow control, port default VID, port security), port mirror (two types: direction mode mirror and flow mode mirror), port description (use character string to describe ports), port statistic (the statistic information of tag forwarding, receiving and conflicting), port situation (connection situation, port speed, duplex mode) and port bandwidth (entrance bandwidth and exit bandwidth). Network includes address parameter (the Ethernet address of the Switch, IP address, NetMask, Gateway, etc), maximum aging time, Dynamic address
TL-SL3226P
24+2G Gigabit Managed Switch User's Guide
TL-SL3226P
24+2G Gigabit Managed Switch User's Guide
The assumpsit of normal control button in the operating interface is as following: <Arrow Key>= Direction Button: up, down, left, right moves cursor <Tab> =T Button: move the cursor to the next stay place ab <W>, <w> = W, w Button: move the cursor up <S>, <s> = S, s Button: move the cursor down <A>, <a> = S, s Button: move the cursor left <D>, <d> = D, d Button: move the cursor right <Esc> = Esc Button: exit the current menu <Enter> = Enter Button: enter the next sub-directory or active the revision <Space> = Space Button: switch the choice <Backspace> = Backspace Button: delete one letter <^U> = press U button after press Ctrl button (Ctrl + U): active the revision data <^A> = press A button after press Ctrl button (Ctrl + A): choose all letter where the cursor locates !Figure 4-3 System Configuration
Remarks: System Information
When you configure System Information, only System Name, System Contact and System Location can be changed. Others of System Information are only for read.
Module Information
If yo u use modules, you can configure the responding module slot. Slot 1 Port 25 Slot 2 Port 26
Remark:
The revised configuration won't be effect without activation. In order to effect the configuration after next startup, you need to enter into the SAVE and RESET menu of System configuration menu to save the configuration.
2) If you install modules, the module information will be showed according to the specific modules. 100M UTP module: 100BASE-TX 100M Fiber module: 100BASE-FX
4. 4. 1 System Configuration
Gig abit UTP module: 1000BASE-T Gig abit Fiber module: 1000BASE-LX/SX
TL-SL3226P
Switch Parameters
24+2G Gigabit Managed Switch User's Guide
TL-SL3226P
24+2G Gigabit Managed Switch User's Guide
!1)
2) When downloading TFTP, TFTP server must have the files for updating. Or else the Switch may be out of the way.
Assigned Managed Port: can be any port or all ports from P1 to P26. Only the workstation connecting to the Assigned Managed Port in the Switch can manage the Switch. The default is All ports.
2)
Broadcast Strom Filtering Mode: have six choices: 5%, 10%, 15%, 20%, and 25%. !
Save Reset
3)
The configuration of parameters won't be effect until you activate the changes. When you press Ctrl + U, the Switch will list you want to activate the changes (Y/N)?Are you sure
When you reset to factory situation, all parameters except IP address can be configured to factory configuration.
. [. . . ] Port Priority: 0 255 (can configure 1 and 255) Port Cost: 1 65535 (can configure 1 and 65535)
!
After you configure the Static MAC Address the Switch can't operate normally if a equipment with this address connects to the other port of the Switch. It's better to delete the static address which won't be used when you configure the static MAC address.
4. 4. 4 Spanning Tree protocol
4. 4. 5 IEEE802. 1X protocol
Figure 4-6 Spanning Tree protocol Remarks: 1) There are limits as following: 1) Figure 4-7 IEEE802. 1X protocol Remarks: The following MAC address can't be set into the Force AUTH MAC
TL-SL3226P
Table. Static MAC Address Filter MAC Address
24+2G Gigabit Managed Switch User's Guide
2)
TL-SL3226P
24+2G Gigabit Managed Switch User's Guide
When you configure the MTU VLAN and effect it, all original VLAN and Trunk configuration will be cancelled.
Force UNAUTH MAC Address Authorized MAC Address
4. 4. 7
Configure Trunk
2)
No matter which port the MAC Address of the Force UNAUTH MAC Table relates to, the Switch won't transfer its' packets. The following MAC address can't be set into the Force UNAUTH MAC Table:
! [. . . ]