User manual TP-LINK TL-WA5210G

[. . . ] Finally, plug the provided power adapter into the DC jack on the Power Injector, and the other end to a standard electrical wall socket. 14 The connection will be similar to the figure below after the above steps are finished. If you use two CPEs to build the network, please make sure that the two CPEs are placed face to face. [. . . ] If you have an external antenna with the RP-SMA port, you could connect it to the RP-SMA port of your CPE directly. If you have an external antenna with N type port, you could connect it to the TL-WA5210G with a pigtail cable. English Note The pigtail cable is used to change the N type port to RP-SMA type port. 2 Note Configure the External Antenna You will need to assign your computer a Static IP address within the same range as the AP’s IP address. 254 in the address field and press Enter A dialog box will prompt you for the User name and Password. How do I restore my AP’s configuration to its factory default settings?With the AP powered on, press and hold the RESET button for about 8 seconds before releasing it. Hold it in for about 8 seconds You will need to assign your computer a Static IP address within the same range as the AP’s IP address. 1) Restore the AP’s configuration to its factory default settings. If you don’t know how to do that, please refer to previous section T1; 2) Use the default user name and password: admin, admin; 3) Try to reconfigure your AP by following the instructions of this QIG. ¾ For Windows 7 OS Go to Start > Settings > Control Panel, and then you will see the following page. Click View network status and tasks 20 Click Change adapter settings English Right-click Local Area Connection Click Properties Double-click Internet Protocol Version 4 (TCP/IPv4) 21 Select Use the following IP address Enter 192. 0 into the Subnet mask field Select Use the following DNS server addresses Enter the DNS server address provided by your ISP or network administrator Click OK English ¾ For Windows XP OS Go to Start > Control Panel, you will then see the following page. Click Network and Internet Connections Click Network Connections 22 Right-click Local Area Connection Click Properties English Double-click Internet Protocol (TCP/IP) Select Use the following IP address Enter 192. 0 into the Subnet mask field Select Use the following DNS server addresses Enter the DNS server address provided by your ISP or network administrator Click OK 23 3 years warranty Technical Support „ For more troubleshooting help, go to: http://www. Com/en/support/download/ „ For all other technical support, please contact us by using the following details: Global Tel: +86 755 26504400 E-mail: support@tp-link. Para ello, haga clic en I agree to these terms of use (Acepto las condiciones de uso). īȚĮ ȞĮ IJȠ țȐȞİIJİ ĮȣIJȩ, ʌȚȑıIJİ ıIJȠI agree to these terms of use ȆȚȑıIJİ Login 40 ǹijȠȪ İʌȚȜȑȟİIJİ ȤȫȡĮ, įİȞ șĮ ȝʌȠȡİȓIJİ ȞĮ ĮȜȜȐȟİIJİ ĮȣIJȒ IJȘ ȡȪșȝȚıȘ İțIJȩȢ țȚ ĮȞ ʌȡĮȖȝĮIJȠʌȠȚȒıİIJİ İʌĮȞĮijȠȡȐ ıIJȚȢ İȡȖȠıIJĮıȚĮțȑȢ ȡȣșȝȓıİȚȢ țĮȚ țȐȞİIJİ İț ȞȑȠȣ IJȘȞ İʌȚșȣȝȘIJȒ İʌȚȜȠȖȒ. [. . . ] Justér retningen for din CPE for at få det bedste signal. For at gøre dette, bedes du klikke på I agree to these terms of use Klik på Login 136 Bem Når du først har valgt regionen kan den ikke ændres med mindre du nulstiller enheden til fabriksindstillinger og omkonfigurerer den igen. English Safety Information z When a product has a power on/off button, the power on/off button is one way to turn-off the product. [. . . ]