Detailed instructions for use are in the User's Guide.
[. . . ] Terminology/Manual. Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product. Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Controls. and. Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installing. the. Phone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
The. Integrated. Answering. Machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Setting. Up. Your. Answering. Machine. . . . . . . . . . . . . . . . . . . . . . . . . . 33 Register. Handsets. to. the. Main. Base. before. . 38 Using!. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 When to Re-register Handsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Using. Your. Answering. Machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Turning the Answering Machine On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Basic. Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Activating AutoTalk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press. and. hold. [volume/select/ ] or [volume/select/ ] to quickly scroll through the numbers on the. display.
Setting. a. Personal. Security. Code. (PIN)
If you want to be able to play your messages from a remote location, you need to enter a two-digit Personal Identification Number (PIN) code (01-99). To select a PIN, perform the following steps: ) With the phone in standby, press [menu/clock] twice. The system announces "Security code, " and the current PIN code is announced as it is displayed on the base. 2) Press [volume/select/ ] or [volume/select/ ] until the desired number appears. You hear a confirmation tone, then the announcement "Security code" followed by the new PIN code is announced. After a few seconds, the system announces "To set ring time, press menu again. " Note:. The. PIN. code. is. set. to. "80". at. the. factory.
35
Setting. the. Ring. Time
The ring time setting allows you to set the number of rings the caller hears before your answering machine plays the outgoing message. If you select Toll Saver [ ], the answering machine picks up after two rings if you have new messages, and after four rings if there are none. This way, if you make a long distance call to check your messages, you can hang up after the second ring to avoid billing charges. To set the ring time, perform the following steps: ) With the phone in standby, press [menu/clock] three times. You hear "Ring time" and the current ring time ([ ], [ ], [ ], [ ] Toll saver), and it is displayed on the base. 2) Press [volume/select/ ] or [volume/select/ ] until the desired ring time appears. You hear a confirmation tone, then the announcement "Ring time" followed by the new ring time. After a few seconds, the system announces "To set record time, press menu again. "
Selecting. the. Message. Record. Time
You have three record time options: one minute, four minutes, and "Announce only. " "Announce only" answers the call with the preset greeting or your personal greeting but prevents the caller from leaving a message. To set the record time, perform the following steps: ) With the phone in standby, press [menu/clock] four times. You hear "Record time" and the current recording time ([ ] minute, [ ] 4 minutes, [ ] Announce only, No recording), and it is displayed on the base. Then you hear the guidance for setting the record time.
36
2) Press [volume/select/ ] or [volume/select/ ] until the desired time appears. You hear a confirmation tone, then the announcement "Record time" followed by the new recording time. After a few seconds, the system announces "To set message alert, press menu again. " Note:. After. setting. the. Announce. only. feature, . you. may. want. to. change. your. outgoing. message. not. to. prompt. the. caller. to. leave. a. message. . However, . the. prerecorded. message. changes. automatically.
Setting. the. Message. Alert. Tone
The message alert tone beeps every fifteen seconds whenever you have unheard messages. The tone turns off automatically after you listen to all your new messages. You can also turn off the message alert tone by pressing any key on the base. Follow the steps below to turn on the message alert tone: ) With the phone in standby, press [menu/clock] five times. [. . . ] STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while this warranty is in effect, warrantor will either, at its option, repair or replace the defective unit and return it to you without charge for parts, service, or any other cost (except shipping at its option, may replace the unit with a new or refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF
ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. [. . . ]