Detailed instructions for use are in the User's Guide.
[. . . ] Step 1 Checking the Package Contents
Make sure you have received the following items in the package. If any of these items are missing or damaged, contact the Uniden Parts Department. · Base unit · Handset · AC adapter · Rechargeable battery · Telephone cord · Beltclip · This owner's manual · Other printed material Uniden Parts Department at (800) 554-3988 Hours: M-F 8:00 a. m. or visit our website at www. uniden. com for replacement parts.
D
Plug the AC adapter cord into the base unit and then into a 120V AC outlet. [. . . ] You hear a confirmation tone, then the announcement "Time" and the time and day are announced for your review. After a few seconds, the system announces "To set security code, press menu again".
The PIN code is set to "80" when you purchase the cordless phone.
Setting a Personal Security Code (PIN)
To play your messages from a remote location, you need to enter a two-digit Personal Identification Number (PIN) code (01-99). To select a PIN, perform the following steps: 1) Press the menu/clock key twice in standby mode. The system announces "Security code", and the current PIN code is announced as it is displayed on the base. or volume/select/ key until the desired number
THE INTEGRATED TELEPHONE ANSWERING DEVICE
3) Press the set/ringer key to select the PIN code. You hear a confirmation tone, then the announcement "Security code" followed by the new PIN code is announced. After a few seconds, the system announces "To set ring time, press menu again".
www. uniden. com T H E I N T E G R AT E D T E L E P H O N E A N S W E R I N G D E V I C E [ 43 ]
Setting the Ring Time
The ring time setting allows you to set the number of rings the caller hears before your answering system plays the outgoing message. Setting [ ] (Toll Saver), the answering system picks up after two rings if you have new messages, and after four rings if there are none. This way, if you make a long distance call to check your messages, you can hang up after the second ring to avoid billing charges. You hear "Ring time" and the current ring time ([ ] 2, [ ] 4, [ ] 6, [ ] Toll saver), and it is displayed on the base. or volume/select/ key until the desired ring time
3) Press the set/ringer key to select the new ring time. You hear a confirmation tone, then the announcement "Ring time" followed by the new ring time is announced. After a few seconds, the system announces "To set record time, press menu again".
[ 44 ]
T H E I N T E G R AT E D T E L E P H O N E A N S W E R I N G D E V I C E
www. uniden. com
Selecting the Message Record Time
You have three record time options. The options "1 minute" or "4 minutes" set the duration for recording the incoming messages. "Announce only" answers the call with the preset greeting or your personal greeting but prevents the caller from leaving a message. You hear "Record time" and the current recording time ([ ] 1 minute, [ ] 4 minutes, [ ] Announce only, No recording), and it is displayed on the base. or volume/select/ key until the desired time
After setting the Announce only feature, you may want to change your outgoing message not to prompt the caller to leave a message. However, the prerecorded message changes automatically.
3) Press the set/ringer key to select the new recording time. You will hear a confirmation tone, then the announcement "Record time" followed by the new recording time is announced. After a few seconds, the system announces "To set message alert, press menu again". M Announce only feature The announce only feature plays a prerecorded outgoing message "Hello, no one is available to take your call. Please call again. ", and it will not allow the caller to leave a message. [. . . ] · Use caution when installing or modifying telephone lines.
Applying Power to the Base
This phone requires an AC outlet, without a switch to interrupt power, and the included AC adapter. To relieve strain on the DC plug when the phone is placed on a desk or table, wrap the power cord around the strain relief notch on the back of the base. NOTE: Place the power cord so that it does not create a trip hazard, or where it could become chafed and create a fire or other electrical hazards.
More Than One Cordless Telephone
If you want to use more than one cordless telephone in your home, they must operate on different channels. Press the channel key to select a channel that provides the clearest communication.
Uniden America Corporation
Parts and Service Division 4700 Amon Carter Blvd. [. . . ]