User manual UNIDEN XC714
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual UNIDEN XC714. We hope that this UNIDEN XC714 user guide will be useful to you.
Manual abstract: user guide UNIDEN XC714
Detailed instructions for use are in the User's Guide.
[. . . ] 41
1
Important Safety Instructions
When using your telephone equipment, these basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons: 1. Unplug this product from the wall outlet before cleaning, and use a dry cloth, without liquid or aerosol cleaners. Do not use this product near water; for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool. Slots and openings in the cabinet and the back or bottom are provided for ventilation. [. . . ] Plug one end of the long telephone cord into the TEL LINE jack on the Base Unit.
5. Place the cord inside the molded channel on the bottom of the Base Unit.
6. Place the Base Unit on the screws and push down until it's firmly seated.
17
7. Plug the other end of the telephone line cord into the wall jack.
8. Plug the AC Adapter into a standard 120V AC wall outlet.
Note: Do not use an outlet controlled by a wall switch.
Setting the Handset Retainer
The handset retainer holds the Handset in place if your phone is mounted on a wall. The steps below describe how to remove and replace the retainer so that the tab faces up. Push up on the Handset retainer on the Base Unit, and slide the tab out.
18
2. Push down on the Handset retainer until it snaps into place.
19
Setting Up Your Phone
Extending the Antenna
Before using your phone, be sure to raise its antenna to the vertical position.
Installing the Handset Battery Pack
1. Align the plastic connector of the Nickel-Cadmium battery pack with its socket and plug it in.
Note: The black lead will be on the left when the plug is properly aligned.
4. Place the battery pack inside the battery compartment, and slide the battery cover back on.
Note: The built-in Memory Backup feature allows up to 3 minutes to disconnect the old battery pack and install a new one without losing any numbers stored in memory.
21
Cleaning the Battery Contacts
To maintain a good charge, it is important to clean all charging contacts on the Handset and Base Unit about once a month. Do not use any liquids or solvents.
talk
flash/rdl talk batt low
1
page/find
2
ghi
abc
3 6 9
def
4
25 CHANNEL ULTRACLEAR PLUS
5 8
tone
jkl
mno
Extend·A·Phone
7
pqrs
tuv
wxyz
D
mem
0
r. tone pause
oper r. vol chan
volume
Contacts Contacts
22
Charging the Battery Pack
Initial Battery Charging
The rechargeable Nickel-Cadmium battery pack must be fully charged before using your phone for the first time. We recommend that the battery pack charge for approximately 15-20 hours, without interruption, before plugging the phone line into your new phone. Either place the Handset facedown
--or--
Hang the Handset on the cradle when the phone is mounted on a wall.
Note: Make sure to change the Handset Retainer before hanging up the phone.
2. If the LED doesn't light, check to see that the AC adapter is plugged in, and that the Handset is making good contact with the Base Unit charging contacts.
23
Charging from the Charging Cradle
(Only for the XC700 SERIES phones. )
1. Plug the Charging Cradle AC Adapter cord into the DC Input Jack on the Charging Cradle.
2. Plug the AC Adapter into a standard 120V AC wall outlet.
Note: Do not use an outlet controlled by a wall switch.
4. The red CHARGE LED lights while the unit is charging.
talk
talk batt low
flash/rdl
1
2abc 5 jkl
3def
4ghi
6mno
7 pqrs
tone
8 tuv
9 wxyz
0 oper
r. tone r. vol chan
mem
Q
pause
volume
24
Continuous Battery Charging
For the best battery performance, return the Handset to the Base Unit at the end of the day. This keeps the battery fully charged, so your phone works best.
Low Battery Indicator
When the Battery Pack in the Handset is very low and needs to be charged, the TALK/BATT LOW LED flashes.
talk
talk batt low flash/rdl
1 4 ghi 7pqrs
2abc 5 jkl 8 tuv
3def 6 mno 9 wxyz
If the TALK/BATT LOW LED begins to flash, the phone is programmed to eliminate its functions to save power. The table below describes what to do to return your phone to normal operation.
During a Call In Standby Mode
Only the Abutton operates. The Handset beeps and the TALK/BATT LOW LED flashes once every 3 seconds. Return the Handset to the Base Unit for charging.
None of the buttons will operate. Return the Handset to the Base Unit for charging.
Note: Allow 15 to 20 hours without any interruption for the Handset to fully recharge.
25
Setting the Pulse/Tone Switch
Be sure the PULSE/TONE switch is in the TONE position.
PULSETONE
Note:
Most phone systems are Tone dialing. [. . . ] · If a power failure has occurred and power will be out for some time, remove the battery from the Handset. This will prevent the battery from completely discharging.
Hear only continuous static from Handset and phone will not turn off.
40
Specifications
General The XC600/700 SERIES complies with FCC Parts 15 and 68.
Frequency Control Modulation Operating Temperature
Base Unit
PLL FM 10° to 50° C 48. 76 to 49. 99 MHz 43. 72 to 46. 97 MHz 120V AC 60 Hz ± 3V AC 81 " (H) x 31 " (W) x 2 1 " (D) 2 2 4 Approx. 43. 72 to 46. 97 MHz 48. 76 to 49. 99 MHz Rechargeable Ni-Cd Battery Pack 7 3 " (H) x 2 " (W) x 2 1 " (D) 4 4 (w/o antenna) Approx. (including battery) BT-185 Capacity 270 mAh, 3. 6V Talk Mode 8 hours Standby Mode 14 days
Receive Frequency (25 Channels) Transmit Frequency (25 Channels) Power Requirements Size Weight
Handset
Receive Frequency (25 Channels) Transmit Frequency (25 Channels) Power Requirements Size Weight Battery
Specifications, Features, and availability of Optional Accessories are all subject to change without prior notice.
41
XC 600/700 Series . .
Extend A Phone ®
e/f pag
ind
25
honRePLUS d ·A ·RPACLEA ECxHtAeNnNEL ULT
Operating Guide
UDZZ01384FZ
PRECAUTIONS
Before you read anything else, please observe the following:
WARNING!
Uniden America Corporation DOES NOT represent this unit to be waterproof. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE UNIDEN XC714
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual UNIDEN XC714 will begin.