User manual X10 IN37A SETUP
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual X10 IN37A. We hope that this X10 IN37A user guide will be useful to you.
Manual abstract: user guide X10 IN37ASETUP
Detailed instructions for use are in the User's Guide.
[. . . ] SETUP INSTRUCTIONS
Setting Up an X10® Multi-Camera System
up, turn it off using your CR12A. [. . . ] Connect the Firecracker Computer Interface The Computer Interface (model CM17A) uses wireless signals to transmit X10 control commands from the computer to the transceiver module included in the kit. If there is already a device connected to this port, unplug it, connect the Computer Interface, and then plug the other device into the connector on the CM17A. Set Up Your Cameras Set the House and Unit code on the addressable power supply (model XM10A). All of the cameras you set up will be set to the same letter (House) code, and each will have its own number (Unit) code. The camera should come on and you should be able to get the picture on the TV. Adjust the antenna so that it points better at the antenna of the receiver. When the camera is set Configure Your Cameras in XRay Vision Run XRay Vision. Right click in the program window and choose "Settings" then "Preferences" from the pop-up menu. [. . . ] For more help, see: http://www. x10. com/support
MODEL NUMBER: IN37A
©Copyright 2000 X10 Wireless Technology, Inc. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE X10 IN37A
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual X10 IN37A will begin.